the main / Multimedia / What to do with an Operating System Wasn T Found error. How to get rid of an Operating System Wasn T Found error

What to do with an Operating System Wasn T Found error. How to get rid of an Operating System Wasn T Found error

While Trying To Boot Windows 10, You Receive The Error: An operating System. Wasn't Found. Try Disconnecting. Any Drives That Don't Contain An Operating System.

Press Ctrl + Alt + Del to Restart

This Error Mostly Occurs After Windows 10 1809 UPGRADE, OR Perform System Restore. And The Most Probable Culprit Behind This Problem Is The Corruption of System Files. If ANYTHING DAMAGES Your Computer's System Files, You May Find YourSelf " Operating System Not Found"While Booting. If You are Also Stroggling From this Problem, Here How to Fix An Operating System Wasn't Found After Restart or System Upgrade.

An Operating System Wasn't Found

First of All, Disconnect All External Devices Include Printer, Scanner, External HDD and Restart Windows. Check Windows Started Normally.

Since This Error Often Occurs When Bios Is Unable to Find The Hard Drive, Checking Bios Settings Might Be a Good Solution.

To Check The Bios Settings, Follow These Steps:

Restart The Computer
Press The F2 Key To Open The Bios Menu.
Check the BIOS 'Main Screen to See Whether It Detects The Hard Drive,
Also, Check The Boot Order to See If it is Set Correctly.
Verify That The Hard Drive Is The First Boot Device.

If The Hard Drive Is Not Detected Properly, Consider Replacing The Data Cables, Or Resetting The Bios Settings to Default Values.

Here Are The Steps to Reset Bios Settings:

ENTER THE BIOS SCREEN BY FOLLOWING THE STES OUTLINED ABOVE
Find The "Reset to Default Option.
Choose The Ret Option, And Answer "Yes" WHEN PROMPTED FOR A CONFIRMATION
THEN, SELECT THE "EXIT -\u003e EXIT SAVING CHANGES" OPTION.

Perform Windows Startup Repair

The Windows Startup Repair May Recover Certain Boot Process Related Errors in Some Cases. Here Are the Steps to Access The Startup Repair from Advanced Options. SINCE DUE TO THIS PROBLEM Windows Unable to Boot Normally, You Need A Windows Installation Media To Perform Next Steps. If You Don't Have Check How to Create From Here.

WHEN YOU ARE READY WITH WINDOWS 10 INSTALLATION MEDIA / USB
Place the Windows Boot. Media on the Computer and Boot from It.
At The First Setup Screen, Choose Your Language, Time - Currency and Your Keyboard Input Method and Click Next.
NOW ON THE NEXT SCREEN SELECT REPAIR YOUR COMPUTER.

This Will Restart Windows Now Next Click Troubleshoot -\u003e Advanced Options -\u003e Startup Repair.

Wait While Windows Diagnosis and Fix Problems. When The Startup Repair IS Completed This Will Automatically Restart Windows and Try to Boot in Windows Normally.

REPAIR CORRUPTED BOOT FILES

IF Startup Repair Failed to Fix The Problem, Then Follow The Steps Below to Configure and Repair the Boot Files.

AGAIN BOOT From Windows 10 Installation Media
Once You Have Reached The Windows Setup Screen, Press The Shift + F10 Keys to Bring Up the Command Prompt.

NOW FIND OUT WHETHER Your Disk Is Set to Guid Partition Table (GPT) or Master Boot Record (MBR):

IN THE COMMAND PROMPT, TYPE diskpart. and Press Enter.

NOW TYPE. lIST DISK. And Hit The Enter Key to Find Out If Your Disk Is Set to Gpt Or MBR Partition.

Look at the GPT Column to See If IT HAS An Asterisk (*).

If You See An Asterisk (*), That Means That Your Disk's Partition Table is GPT.
If You Don't See An Asterisk, That Means That Your Disk's Partition Table Is MBR.

Type Exit and Press Enter.

Now Fallow Below We Have Two Different Solutions for Different Partitions.

Fix Boot Files ON MBR PARTITION TABLE

Note: If You Have GPT Partition Skip Thi and Fallow NEXT STEP

NOW FIND OUT THE DRIVE LETTER WHERE Windows Installed. You can do this by Type Command Type list Volume And Hit The Enter Key. You Will Notice The Drive Letter Where Windows IS Installed As Boot.

WHEN YOU FIND OUT WHICH DRIVE CONTAINS THE Windows Folder, (for me its drive "C:"), Give The Following Command to Create The Boot Files On That Drive and Press Enter.

bCDBOOT C: \\ Windows / S C:

* Note: If Windows Are Located On A Different Drive, Change The Letter C With That Drive Letter.

After Execute The Command Again Open Diskpart. Utility by Type Command diskpart. And Hit Enter Key.
HERE ON DISK PART UTILITY TYPE lIST DISK. Press Enter Key.
SELECT THE DISK Letter by using Command SELECT DISK 0.
Type Fallowing Commands One by One As Per Instructed Bellow
list Volume
sELECT VOLUME 3. (HERE SELECT THE VOLUME NUMBER WHICH CONTAINS THE Windows Operating System)
active.

Type eXIT. To Close The Diskpart Tool. Thats All Now Remove The Installation Media and Reboot Your Computer.

Fix Boot Files ON GPT Partition Table

If You Have the GPT Partition Table Fallow Bellow.

Type diskpart. AND HIT ENTER TO OPEN THE DISKPART UTILITY AND TYPE BELLOW COMMAND.

Probably, you do not need to explain how imparting is the situation when the user includes a computer or a laptop on loading and instead of the usual start system with no one on the screen writes Operating System Not. Found. Many users have a real shock. How so? Yesterday everything worked ... What could happen, and how to fix this situation, we now and see.

What does Operating System Not Found error mean?

If you look at the message itself, it is not difficult to translate it as "the operating system is not found." But the trouble is - the user is absolutely sure that it is. And here computer system Such confidence with the user does not share, because it simply does not find the components responsible for loading the system.

In general, such situations are most often manifested, for example, when the user removed the Winchester, replaced it with a new one. Maybe simple hDD It was out of order, but you never know what.

Possible causes of occurrence

If suddenly it turned out such a casus, and the system constantly issues the Operating System Not Found message (Windows 7, 8, etc.), first of all, do not panic. To begin with, simply check maybe a flash drive is inserted into a computer or laptop, and in bIOS settings The priority for download is the USB device.

If the hard drive was filmed or changed to a new one (it concerns stationary computers), it may very well be that when it is re-connected, the corresponding loops were incorrectly or loosely connected. Let's see what can be done in such a situation.

The simplest BIOS settings

Most. simple way Changes to the BIOS parameters can be reset all settings to the factory default (default). In any version of the BIOS there is such a setting.

In the extreme case, you can simply change the load priority in the section Boot Device. Priority or Boot Sequence, and as the first (basic) boot device (bootable device) Install the hard drive.

It happens, however, it is that the hard disk in the BIOS is determined, but the download is still not done, and the system again and again displays the Operating System Not Found warning. What to do in such a situation? First see if it is not necessary opposite the model hard disk It signals that the device in the system, although being present, but simply disabled or not involved.

As a rule, in most versions of the BIOS on the right there is a special device assistance field (Specific Item Help), where the key combination is indicated that allows you to enable or disable any component. The most likely combination is SHIFT + 1. But here everything depends on the manufacturer (combinations can be different).

Switching hard drive modes in Bios UEFI

On the other hand, if the Operating System Not Found warning is arising on a laptop, where the hard drive is quite problematic, it is worth paying attention to the settings of the hard disk operation modes. As an example, consider the settings of the new UEFI system, although they can be used without problems in other versions.

In general, the SATA configuration has two main modes: AHCI and IDE. When installing the "Operations", as well as in the default settings included aHCI mode. When switching to the IDE, no matter how you try to install Windows on the hard drive.

The same applies to the moments when users at the end of the installation process, or if ignorance, whether the IDE mode is accidentally included. As already understandable, the system and gives the Operating System Not Found string. By the way, even if in this moment To put another fully workable "screw", without changing the SATA settings to the initial it will not work too.

Therefore, you should immediately advise the users to change such settings only in the most extreme case when it is really necessary.

Windows boot recovery

There are also cases when the message "Operating System Not Found" appears when damaged windows bootloaderWhat is connected only with errors on the hard disk, for example, due to incorrect completion of work. At the same time, as already understandable, the entire system can "fly".

In such a situation, you can try to restore the loader, and at the same time check system Disk Or section for errors. For this, always at hand it is desirable to have an original installation disk or a system drive for recovery.

Here it will be necessary to exhibit optical drive In the BIOS as the first priority device for download, after which it is not necessary to use, in this option is not a question about restoring Windows from the control point. It will not help any equal, and the warning Operating System Not Found will appear again.

Here you need to use the load recovery mode or command linethat is preferable. It should consistently enter two main commands: bootrec.exe / fixmboot and bootrec.exe / fixboot, after each pressing "input". If such a sequence does not help, in addition you can add the BootRec.exe / RebuildBCD command.

Before performing such actions, it is strongly recommended for errors with their automatic correction (CHKDSK / F / R or CHKDSK / F / X / R command). You can also use the CHKNTFS / X C checkup: subject to the presence of a file nTFS systems In the system section (disk "C").

If nothing helped

However, if all of the above ways to correct the situation will not help, here it is necessary to diagnose the hard disk. That's just if it is not a problem for removing it, then you will have to contact the nearest service center Or the workshop and do not try to remove it on your own.

As it is already clear if the winchester "fell", you can not do anything, you will have to change it to a new "iron", after which it is re-installed. You can, of course, try on it the action of the utility, but one hundred percent success is rather difficult to ensure.

One of the most terrible user errors is the one that appears when the computer is turned on and informs us, on the Black BIOS screen, which "". When this message appears, the loading of our system will be impossible, and the only output is to restart the computer by clicking "Ctrl + Alt + Del", and at the same time you will most likely see this message again An Operating System WASN "T Found. Ttry Disconnecting Any Drives That Don" T Contain An Operating System. Press Ctrl + Alt + Del to Restart.

The error problem is that the operating system is not displayed, and therefore the BIOS cannot load the Windows system. The reasons for the appearance of this error are very diverse: from a simple configuration error in the BIOS to a more serious problem, which in the worst case makes us fully format the computer. By this we will analyze the main causes and their solutions to eliminate the error "" ( An Operating System WASN "T Found).

Disable external USB devices from a computer

If several internal hard drives, external and USB flash drives are connected on the computer, it is likely that BIOS is trying to find the operating system in the wrong place. Consequently, without finding the Windows system, it gives an error "no operating system not found".

To solve this problem, you need to disable all external storage devices connected to USB ports and try again. We can also check out our optical drive to make sure that it does not try to download the wrong DVD.

If after that the problem is still not solved, the next step will be the transition to the BIOS settings.

BIOS boot priority change

Go to the BIOS configuration by pressing the F2, F12 or Delete buttons. After that, go to the configuration section Boot.and put in the first place in the column Priority.hard disk on which the working and main operating windows system. IN different versions Bios is called differently, but you are looking for a word with a combination of priority, which means "priority load". Here are some names from different BIOS: Hard Disk Priority, Boot Device Priority, Hard Disk Boot Priority.

It can be useful: . There you will find where to look for about Priority But do not forget that there is for the manual flash drive.

After you set the priority of booting from the hard disk on which your system is located, do not forget to save the settings with the F10 button and restart the computer to make sure that the system is found when the computer is turned on. "

Enable or disable secure download

If you are using modern computer with an operating system, such as Windows 8 or Windows 10, then the reason for which our Windows does not start, is in improper configuration of safe UEFI download.

Walk back to BIOS, find the configuration section Secure Boot (Safe loading) And deactivate it or activate if it is disabled to check whether the error disappear "The operating system is not found when the computer is loaded".

In different versions of bios. Or the UEFI layout of the settings looks different, but you are looking for a graph in any version of the bios Secure Boot, Try to disable or enable.

Reset BIOS to factory settings

At the bottom of the BIOS menu, you will see the key for default settings or bIOS reset. On my car it F9.Confirm your solution when the query appears and restart the computer.

If you did not find an exemplary button, like F9 to reset the settings to factory, then look for a string Load Setup Default. And reset the bios.

If your hard disk with the operating system is placed first, but the computer is still not loaded, it is possible that some of the initial sectors of the disk were damaged, such as basic boot record (MBR), dOS boot record(DBR), or Download Configuration Database (BCD).

Repair of these sectors is quite simple. All we need is to start a computer from a USB or Windows DVD. You can for example or just start with and select when installing Windows Restore System.

Enter the following commands in CMD in order by pressing ENTER. To execute each command may take time.

bootrec.exe / fixmbr.
bootRec.exe / FixBoot
bootRec.exe / RebuildBCD.

Activate the Windows section

It is possible that the section on which Windows is installed is disabled. You can fix it using your own DiskPart Windows tool. To perform the following steps, you will need a USB media to install Windows. Run the command line as described above, through the disk recovery or installation USB flash drive and on the command line, take the following commands:

diskpart. - Start the tool.
lIST DISK. - List of connected disks to the computer.
sELECT DISK 0. - Select a hard disk on which you want to activate the section. In my case, the main hard drive 0.
list Volume - Shows sections on the selected hard drives.
sELECT VOLUME 2. - Choose local disk To activate. Choose the one where the Widows system itself is installed.
active.- Activate the section.

Restart the computer and make sure whether the error disappears when the computer is turned on An Operating System WASN "T Found. Ttry Disconnecting Any Drives That Don" T Contain An Operating System. Press Ctrl + Alt + Del to Restart, What does it mean operating system not foundClick to reboot ctrl + Alt + Del.

Very often, when refusing to Windows 10, start, the Boot Failure error is displayed on the screen, as well as An Operating System Wasn't Found. Press Ctrl + Alt + Del to Restart. The causes of these errors are the same, the ways to eliminate them are also similar.

Both these errors may appear in the "dozen". For example, when you delete the bootmgr file, the first error pops up on Operations with Legacy, and when the entire partition is eliminated, the second error appears.

Before you start troubleshooting errors, you need to carry out those manipulations that are written in the text of the notification, and then restart the computer. First of all, you need to turn off all drives from PC that do not contain an OSEM system. It can be flash drives, optical carriers and third-party hard drives. In addition, this category includes all that is connected via USB, except controls.

In addition, you need to check that the start is running from the first hard drive or Windows Boot Manager file for uEFI systems. In this case, you need to go to the BIOS and check the order to start the devices. To perform this, it will be easier to use Boot Menu. If when it is applied, the "dozen" starts normally, then you should go to the BIOS and change the parameters.

If this did not bring the desired result, then such errors arise for more serious reasons, so they will eliminate them a little more difficult.

Setting up the loader "Dozens"

As can be understood from the above, the artificial occurrence of errors is quite frequent, if you independently spoil the contents of the hidden department reserved by the operating system or with the operating bootloader. In this case, it is necessary when such errors appear to try to restore the operating boot.

Make it can be quite simple. You must get a bootable storage device
or a disk recovery with an operating system of the same bit that is installed on a computer. It is worth noting that such a drive can be created on another computer.

Next, you need to download the PC from this drive. If an installation image of the system is applied, then you need to go to the recovery environment. To do this, you need to click the Software Restore language on the screen.

You need to specify "Troubleshooting". In the next window, you must click "Advanced Parameters". After that, you need to click "Recovery when loading". Then you need to select the version of the OS.

After that it starts automatic search Problems with the loader and its restoration. This function functions excellent and in most cases the user intervention is not required.

If this does not bring the desired result, the error will be displayed again on the black screen, while the download must be executed from the required drive, it is worth trying to reanimate the loader in manual mode.

In addition, the problems with the loader may occur after turning off one of the hard drives from the PC. In this case, the bootloader should be located on this drive, and the operator on the other. In this case, it is necessary to make a certain way.

First of all, it is necessary at the beginning of the disk with an operating system to take a little space under FAT32 for UEFI or NTFS for Legacy. You can perform it using free image Minitool Bootable Partition Manager. After that, you need to restore the bootloader in manual mode using BCDBoot.exe

Launch error "Dozens" due to hard drive problems or SSD

If no renewable manipulations help eliminate these errors in the "dozen", in which case malfunctions with hard drives or lost files can affect them.

If there is assumptions that something from this happened, and it may affect the power failures, the defects of the hard drive, etc., in this case it is necessary to carry out several manipulations.

First of all, it is necessary to reconnect hard drive or solid State Drive. This requires disconnecting SATA loops and power cords from motherboard and hard drive. You can also turn off the other wires.

Then you need to boot in the recovery environment, and applying the command prompt, you want to scan hard drive for errors. In addition, it is possible to reset the system from a third-party drive. There is also a variant of eliminating the error by installing the operating system from scratch, while performing formatting.

That's basically it possible reasons The emergence of problems and methods to eliminate them. Very good, there will be, if you eliminate the problem to get simple disabling drives and bootloader restoration. If it does not help, then you must reinstall the OS.

1. Symptoms of the Problem

WHEN COMPUTER IS POWERED UP, THE FOLLOWING ERROR MESSAGE APPEARS:

An Operating System WASN "T Found. Try Disconnecting Any Drives That Don" T Contain An Operating System. Press Ctrl + Alt + Del to Restart (White-On-Black Letters in Text Mode and Blinking Cursor):

2. NORMAL BOOT SEQUENCE

The Rest of this article Refers to Windows 10, But All Information Below Applies to Windows 8 / 8.1 AS Well. (Windows 7 and Windows Vista Never Emit This Error, Instead The Emit "Bootmgr Is Missing".)

Normally Windows 10 Boots AS SHOWN BELOW:

Master Boot Record Scans Partition Table for Active Partition, Then It Loads 1st Sector from Active Partition, Verifies 55 AA Signature, and Transfers Control to Boot Sector.
Boot Sector Loads 15 Additional Sectors from the Beot Record and Transfers Control to First Additional Sector of VBR.
Volume Boot Record Loads bootmgr File from Root Directory of Boot Partition Into The Memory and Transfers Control to IT.
Bootmgr Loads Boot \\ BCD Registry Hive and Display boot Menu.. Bootmgr is Aless to Run Memory Test And Set Safe Mode Boot Flag Per Explicit User Request. But Normally, It Loads WinLoad.exe WHEN COMPUTER BOOTS NORMALLY (COLD STARTUP) OR WINRESUME.EXE (WINES RESUMES FROM HIBERNATION).
WinLoad.exe Opens System Registry Hive, Gets List of Drivers, Loads Ntoskrnl.exe, Loads Drivers (* .sys Files) and Transfers Control to Ntoskrnl.exe.
WinResume.exe Loads Memory Dump from Hiberfil.sys and Transfers Control to IT.

3. Defect in the boot sequence Which Leads to Bootmgr Is Missing Error

Defect in the boot sequence Which Leads To "An Operating System WASN" T FOUND "Error Is Shown Below:

Bios Loads 1st Sector from HDD (Master Boot Record), Verifies 55 AA Signature and Transfers CONTROL TO MASTER BOOT RECORD.
Master Boot Record Scans Partition Table for Active Partition. There Is One Active Partition, SO Master Boot Record Loads 1st Sector from Active Partition (Boot Sector), and Transfers Control to IT.
Boot Sector Loads The Rest of Volume Boot Record and VBR TRIES TO Find Bootmgr at the root directory of bootmgr "File Does Not Exist or Not readable.
The REST OF USUAL BOOT EVENTS Do Not Happen.

4. How to Fix "An Operating System WASN" T FOUND "Error

1) Download Emergency Boot Kit And Deploy It to USB Thumbdrive According to the Instructions, Then Set Up Your Bios to Boot from USB Thumbdrive. You Need Full Version of Emergency Boot Kit to Actually Write Changes to the Disk, But It "S Recommended to Try Demo Version to Make Sure Are No Hardware Incompatibilities.

2) BOOT INTO EMERGENCY BOOT KIT:

3) RUN FILE MANAGER FROM THE MAIN MENU:

4) Press Alt + F1 and Choose Your Boot Partition from the Menu. For windows 10 And Windows 8 / 8.1 This Partition Should Have "System Reserved" Volume Label and IS Expected to Be Small (100-500Mb). Use Up and Down Arrow Keys and Enter to Navigate The Menu:

5) in this example, bootmgr file is missing from boot partition. If IT EXISTS IN YOUR ENVIRONMENT, DELETE IT (SET CURSOR TO THE FILE USING ARROW KEYS UP AND DOWN AND THEN PRESS F8). IF Bootmgr File Is Not Deleteable, Then Rename It (for example, to bootmgr.old by pressing F6 Key):

6) INSERT Windows 10 Installation USB Thumbdrive to Any of Your Computer "S USB Ports and Press Alt + F2. Choose Windows 10 Installation USB Thumbdrive Drive From The Menu Using Up and Down Arrow Keys:

(Alternative Approach.: If Don "T Have Windows 10 Installation USB Thumbdrive, Then You Can Recover A Copy of this File From \\ Windows \\ Boot \\ Pcat Folder On Your System Partition)