Menu
Is free
registration
home  /  Multimedia/ Samsung Galaxy S3 Drivers Download - Update Samsung Software. Android OS update on Samsung phone Galaxy update from 3

Samsung Galaxy S3 Drivers Download - Update Samsung Software. Android OS update on Samsung phone Galaxy update from 3

but a new version Firmware did not arrive for all users, since different operator versions of firmware may differ in delivery time, while other users' smartphones themselves may not see the new firmware. In this regard, I wrote a small instruction on Galaxy update S III to Android 4.3 manually.

So, first we need it itself, you can download one on our website. For devices purchased legally, it is best to install the version for the home market in Russia, but there is no such version yet, so I decided to install the British version. It is not much different and also contains Russian, like any other European version. In the future, it will be possible to reinstall the firmware using the method described below and this will not lead to the loss of the official warranty for the smartphone. I also recommend reading the article to the end in order to avoid further discomfort that will inevitably overtake you after the update.

The procedure for installing the firmware is as follows:


  1. run the program on a PC and make sure that the smartphone has enough charge;
  2. enter the smartphone into the Download Mode (while pressing the "off" + "volume down" + "home button" keys), then press "Volume up";
  3. connect a USB cable to the device;
  4. in the Odin application on your computer, select files from the archive with the firmware:
    • for the PIT graph - a file with the * .pit extension;
    • for PDA - a file with the word CODE in its name, if there is none, then you should know that this is the heaviest file in the archive;
    • for CSC - a file whose name contains the word CSC;
    • for Phone - a file containing MODEM in the name;
    • Note. If the files for the CSC, Phone and PIT graphs are absent in the archive with the firmware, then we sew exclusively by the method of one file, i.e. we indicate the location of the firmware in the PDA column, and leave the rest of the lines blank.
  5. make sure Odin is checked for Auto Reboot and F. Reset Time ". If the location of the * .pit file was specified, then the "Re-Partition" checkbox will be set automatically;
  6. press the "Start" button and watch how the firmware process is going on. The phone may reboot several times during installation and in no case should you disconnect the cable from it until the message “All threads completed” appears in the Odin log or the green information window with the inscription “PASS!” Turns on.

Average process Galaxy firmware S3 takes about 6 minutes, but can take longer. In any case, it is worth waiting for an inscription about the completion of the installation of the firmware, because an early interruption of the process can turn the phone into a "brick". As soon as Odin informs you that the firmware has been installed successfully (message "PASS!" In the Odin application), you can proceed with the installation itself operating system.

Difficulties in Android installation 4.3 no, the system is intuitive and prompts the user to place the necessary checkboxes himself, and even if you miss any moments, you can always make changes in the smartphone settings. The phone is now fully flashed and ready to go.

Android 4.3 is quite different from previous version(Android 4.1.2), but we still have the same Jelly Bean, so it won't take long to get used to the innovations. First of all, the updated interface that the Galaxy S3 inherited from its own is striking. In addition, the standard Samsung keyboard and the S Voice service, new screen and camera modes appeared, and they were accompanied by a redesigned notification center and settings section. One more feature Android 4.3 has support for TRIM (now the device should become faster), ANT +, hours and full voice control.

However on this moment Android 4.3 is not for everyone, as, being official, the firmware is still damp and sometimes buggy. In particular, I noticed that unlocking now takes longer, and sometimes during this process the phone may freeze altogether, after which it will have to be rebooted. After asking other users about this problem, I found out that many people experience such delays. At the same time, other users complain about other things as well. For example, the hang of the end of the call button.

In general, Android 4.3 can be delivered for review, but at your own peril and risk. However, I would still recommend waiting for the official Android version 4.3 Galaxy S3 for Russia or firmware with fixed bugs. Fortunately, Samsung is already working on a solution to the identified issues.

Samsung has officially stopped upgrading the international variant, meaning you cannot get the official Android update KitKat. Naturally, when such a thing happens, the online community makes up for the gap. And this is very good news, because Samsung, despite the abundance of complaints and online petitions, does not seem to want to upgrade its Galaxy S3 to KitKat (although everyone knows you can; Android 4.4.4 is designed to run on a 1GHz processor and 512 MB of RAM).

ParanoidAndroid is a ROM created by a dedicated team of developers and the latest (final) version has just arrived for the international Galaxy S3 model, which is the I9300. Of course, being a custom ROM, the process of installing it on your phone requires you to have root access, which could potentially bite the phone if it goes wrong and void the warranty too.

Still unsure? Here's an excerpt from Android View on reviewing ROMs: “PA3 + is an AOSP based rum and most of all I love it for its beauty, especially its hybrid flexibility. The performance of the ROM is fast and responsive, but one thing that still worries me is the battery life. Don't expect very decent battery performance from it. Install it, enjoy it and look forward to fixing the battery leak in the future. "

We hate to say these things, but we must emphasize that if you are going to root your phone and install this ROM, then you are doing it at your own risk. We do not accept any responsibility if your phone stops working!

Before we start

  1. First of all, it is important to clarify that it is software and procedure for international variant of Galaxy S3, only for I9300. To make sure that you have correct model, go to Settings> About Phone where you should see your model number. If it's I9300, move forward. In addition, the phone must be disconnected from the network.
  2. Secondly, it's a good idea to back up any important files or data that you may have on board your Galaxy S3 before moving on. You can manually connect your phone to your PC and eject what you need, or you can use a custom recovery tool like ClockworkMod or TWRP - these tools create a whole backup the phone and you can restore the state that was if things go awry or if you change your mind (provided that the phone is not completely bricked, of course).
  3. Make sure your computer has updated USB drivers to connect to your phone.
  4. Make sure your smartphone is in USB debugging mode. Go to Settings> Developer Options and check the box next to Enable USB Debugging. Note that if you cannot see the developer options, you can open them by pressing the software build number seven times.
  5. Make sure your phone is fully charged.
  6. Make sure you have a MicroSD card in your phone.

You must be rooted to your smartphone!

Receive files

You must download the custom PA ROM:

  • ParanoidAndroid ROM

You must also download compatible google apps, you have a choice of two sets:

  • Google App Files (templated)
  • Google App Files (full)

Now flash it!

Using these downloaded files, connect your phone to your computer with via USB... Copy the PA firmware and archive files Google Apps in root folder Phone SD Card - Don't Extract Files!

You can now install ROM using recovery methods either through ClockworkMod (CWM) or TWRP Recovery.

If you are using CWM

  1. Select wipe data / factory reset. Then select "Yes" when prompted.
  2. Select erase the cache partition and confirm.
  3. Go to the main CWM menu. Click Advanced and then Wipe Dalvik cache and confirm.
  4. Select "Install Zip from SD Card" then "Select zip from SD Card". Find the final ParanoidAndroid ROM file, select it and then confirm.
  5. Once this is done, select "Return" next to "Reboot System Now" from the recovery menu. Wait for the phone to complete the reboot process, which can take up to five minutes.

If you are using TWRP

  1. Turn off your phone and wait 5-10 seconds until it turns off completely.
  2. Boot your phone into recovery mode by holding the volume up, home, and power button at the same time until the recovery screen appears. You can use the volume keys to navigate the recovery options and the power button to select an action.
  3. Click "Erase" and scroll down. Select "Reset to factory settings".
  4. Now choose Erase> Advanced Erase and select System. Scroll down and select Swipe to Erase.
  5. Click install and find the final ParanoidAndroid file on your SD card. Swipe down on the screen and make a selection to confirm the firmware.
  6. Follow the same procedure for google files App.
  7. After the installation is complete, click "reboot" and select "System". The reboot can take up to five minutes.
  8. Note that if your phone gets stuck in a boot loop, please do a factory reset from recovery mode.

Want to update your Galaxy smartphone S3 to the latest operating system Android systems 7.1? In this article, you will find several versions of custom firmware based on Android 7.1 Nougat. The new firmware promises amazing features, including CM14.1, as well as additional security patches.

Developers and users who have already updated the Galaxy S3 to Android 7.1 report that the smartphone is fast and stable. However, it is worth remembering that the firmware is still under development, so some functions may not work properly.

On the official site Android firmware 7.1 Nougat for Galaxy S3 you can read about new features and updates.

At the time of this writing, the most Last update Android 7.1 Nougat firmware for Galaxy S3 has been released January 23, 2017.

Preparation

  • Create a backup Galaxy data S3 because inner memory the smartphone is completely cleared.
  • Enable USB debugging. Check out how to do it.
  • Galaxy S3 must be Root, unlocked and use TWRP recovery mode.
  • The smartphone must be at least 60% charged.

Note: this instruction designed to update Samsung Galaxy S3 I9300. If you have a different smartphone model, do not try to update it using this guide, or you may experience problems.

How to update Galaxy S3 to Android 7.1 Nougat

Required files: Download AICP Android 7.1 Firmware for Galaxy S3 and save it to your computer. Also download GAPPS, but do not extract the contents of the archive.

  1. Connect your Galaxy S3 to your computer using a USB cable.
  2. Copy the zip file of the firmware to your SD memory card.
  3. Disconnect USB cable and turn off Galaxy power S3.
  4. Boot your smartphone into recovery mode. You can do this by holding down three keys at the same time: Volume Up + Home + Power.
  5. Back up your current firmware: go to Backup> Backup and restore.
  6. Perform a had reset: select data / factory reset. Then select wipe cache partition and wipe dalvic cache.
  7. Then select the menu item choose zip from sdcard, then go to the section that contains the previously downloaded Android 7.1 firmware for the Galaxy S3. Confirm the flashing process.
  8. Go back to the main recovery menu and restart your Galaxy S3.

How to returnthe oldfirmwareGalaxy S3: If you want to restore old firmware then go to recovery mode as described above, click on backup and restore, then select the previous firmware from the list.

That's all! Now you know how to update Galaxy S3 to Android 7.1 Nougat.

Samsung releases mobile phones based on the Android operating system. Each new gadget equipped with modern version operating systems. Owners of older devices are encouraged to update their software to the latest version. If you still have old version firmware, then let's look at how to update the Android OS on Samsung phone.

The easiest method

It belongs to the list of powers of an ordinary user and does not require deep knowledge, so anyone can do it on their own.

Before making changes, we advise you to back up the stored data to external storage... It is also important to check the battery charge level. The process is long, so it is worth charging the phone to 80-90% to avoid a sudden stop of the update.

Before the procedure, it is recommended to turn on the reception Wifi signal in order to avoid material losses from the mobile account. When the data is received from the server, go to the "Install" field, await notification of the completion of changes. After the adjustments made.

This algorithm described for use on smartphone Samsung galaxy s3. However, the essence remains relevant for all devices.

Update via computer or laptop

You need to install the Kies program. The utility must be licensed so as not to spoil the operating system.

Returning to factory settings

It happens when a person is not satisfied with the expansion. Then rollback is performed.

How to get rid of the pirated version

Let's say you accidentally installed an unlicensed file and are wondering how to uninstall an update.

As you know, Samsung is no longer releasing an OTA update for the Galaxy S3 Mini. Thus, the phone is stuck on KitKat OS, unless of course you want to leave with
How to update your Galaxy S3 Mini with Android 5.0 Lollipop.
As you know, Samsung is no longer releasing an OTA update for the Galaxy S3 Mini. Thus, the phone is stuck on KitKat OS, unless of course you want to keep the devices officially. But, if you're ready to turn up a little operational version then we recommend you check the recommendation below. In this tutorial, we will show you how to easily and safely update your Samsung Galaxy S3 Mini to Android 5.0 Lollipop OS using new firmware Rom.
This drive is built from pure AOSP Android 5.0 Lollipop OS, as the goal is to bring the default and latest Android firmware to the Galaxy S3 Mini. The drive has therefore been tuned and optimized in order to fit with your SGS3 Mini. So, if you want to test it yourself, then feel free to check all the lines below, as you will find all the details you need for the flashing process there.
First of all, you should know that this custom version of Android 5.0 L OS works seamlessly on the Samsung Galaxy S3 Mini. According to users who already have AOSP ROM installed, there aren't any errors or other software-related issues. Of course, since we're talking about custom drives, you might find unusual things, but don't expect to have major bugs or pesky problems and you can install it for daily use.
After flashing, you will be able to get the latest lolipop functions and applications. In addition, with the help of this disc, you can improve your Galaxy S3 Mini device.


In a few words, you can improve battery life, gain faster speed, change the default Samsung UI, refresh faster web browsing, and refresh other features.
I also want to note that after you get into this firmware, your phone warranty is no longer valid. In case of something by phone, you will take service center company, you will have to pay. But guarantees can also be returned, with the official firmware path.
I also want to note that this drive is not an official release from Samsung or Google, only a custom drive that was created on the latest AOSP release. So don't bundle the aforementioned company into this firmware.
Before installing your phone, you must have Root and latest version recovery (TWRP Recovery). I also remind you, never forget to make a Nandroid backup of the disk that you are sitting at the moment, this is to ensure that if new disc you don't like it, you can easily return your old disc. How? Read below.
Read and understand the entire manual before actually following the instructions.
Warning: Use these instructions at your own risk. We will not be held responsible for anything that happens to you or your device resulting from the use of the information in this manual.
This tutorial is for Galaxy S3 Mini only. Please do not try to install on any other device.


Make sure the drivers for your device are installed on your computer. You need to enable USB debugging mode which is disabled by default. Your smartphone should have 70-80% charge. Never skip Nandroid backup as it is very useful, if this firmware does not work the way you want, then you can easily return your old disk. This tutorial will destroy all data.


Proceed at your own risk. Samsung kies will not detect your phone after installing this disk, because it custom firmware... Make sure to back up all data in your phone memory before proceeding. How to make backup read here. Another way: here.
New stable CM12.1 release (20160210) is available for S3 Mini, go here.
The developers recommend installing the firmware via TWRP Recovery, and we will do so.
> Install the firmware via TWRP Recovery:


1. First, download both files from the link above to your computer.
2. Connect your device to your computer and copy both files to the root directory on your device (not any folder).
3. Disconnect your phone and turn it off. And make sure you wait 5-6 seconds to complete the power off completely.
4. You will now boot your phone into recovery mode (TWRP Recovery) by pressing and holding the Volume Up, Home and Power buttons.
5. Run nandroid backup existing disk using the backup program located in the twrp recovery main menu.
6. Select: Backup ››, - set file name and confirm the process.
8. Select: Wipe "Advanced Wipe" - and from the bottom select: Swipe to wipe.
9. Select: Install ›› cm12.0_golden.nova.20150308.zip ››, - confirm the process.
10.


Select: Install ›› gapps-lp-20150314.zip ››, - confirm the process.
You should now be running Android 5.0.2 Lollipop on your Galaxy S3 Mini. Enjoy!
Going back to the previous ROM: To go back to the previous ROM, boot into recovery, select Backup and Restore and restore your previous ROM by selecting it from the list.


How to update galaxy s3 mini, from android 5.0 lollipop