Menu
Is free
registration
home  /  Programs/ Zte geek 2 pro firmware android 5.

Zte geek 2 pro firmware android 5.

How do I update the software?

We provide you different ways software updates, namely: update using a memory card or update "over the air".

To update "over the air" you need to connect to a wireless network Wi-Fi or GSM Internet connection and check for updates in the settings.

What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?

Smartphone is complex electronic device which includes the functions of a pocket computer and cell phone and consumes a lot of energy for these functions to work. The main amount of energy is spent on the operation of the display module and the GSM transmit-receive path. The brightness of the display is automatically set to maximum in a very bright environment (sunny day) or set by the user to manual mode... Maximum brightness consumes maximum power. At GSM operation and with a stable and stable reception "at the maximum", the device consumes a minimum amount of energy to maintain communication. In case of an unstable and weak network signal, the machine needs more power to maintain communication. In the case of "Search Network" in an area with no network, the device consumes the maximum amount of energy, which is spent on searching for the nearest base stations... To reduce the energy consumed by the phone, you need:

1. Disable GPS if not required.

2. Disable Mobile Internet if you don't need it.

3. Disable or remove unnecessary unused applications. they are active and consume the internal resources of the apparatus.

What should you do if the phone freezes, does not turn on or reboots?

Most of the time, third-party software or programs are the cause of the restart or freeze.

1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option in the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data / factory reset". The way to enable "Recovery mode" is described below in the paragraph "How to enter Recovery mode?".

2. If a factory reset does not help, update the software. The software update methods are described in the "How to update the software?"

3. If updating the software does not help, contact your nearest Authorized Service center ZTE.

How to back up data, notebook or "Back up"?

There are 3 ways to back up:

1. In the phone settings in the "Restore and reset" submenu, check the box for restore.

2. You can transfer the necessary information to your computer using USB cable.

3. You can make "Back up" using a third party program.

What to do if I forgot my password or pattern key to unlock the screen?

If you have forgotten your pattern or digital password to unlock the screen, you need to carry out the reset procedure to factory settings: 1. Turn on the device in "Recovery mode" and select "wipe data / factory reset". 2. If the procedure is not followed, it is required to contact a ZTE Authorized Service Center.

How to use wireless networks (Wi-Fi, BT)?

1. Turn on Wi-Fi in the device settings. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.

2. The machine will automatically search for active Wi-Fi networks in the access zone from 5 to 50 meters to the access point (depends on the power of the access point).

3. Select the network you need and click on it. If wireless network password protected, enter it.

4. After connecting to desired network the Wi-Fi icon appears on the main screen of the device.

How to turn on the distribution of the Internet on the phone (USB modem or WiFi router)?

There are two ways to enable tethering on your phone. The first way is to enable the distribution as a USB modem, the other is to enable the distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:

1. USB modem - the method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings-> Wireless networks-> More" Modem mode - check the USB-modem checkbox. Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB-modem or simply disconnect the cable connection.

2. WiFi router - make sure you have a stable internet connection through mobile network or USB. "Settings-> Wireless networks-> More" Modem mode - check the "WiFI access point" checkbox. For protection wireless connection click on the hotspot icon then click "Hotspot WiFi access". In this menu, you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"

How can I quickly see the charging status?

Press the power button while charging. The battery charge status will be shown on the main screen of the phone.

Why is the volume of free memory of the device less than stated by the manufacturer?

Unlike a processor, which has its own built-in memory, other devices, such as a video processor, an audio processor, and other devices included in the element base of the device's central board consume user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of an overflow, the user memory is used.

What types of device lock can I use?

There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.

1. Locking with a pattern

2.Pin-code lock 3.Password lock

What is the operating temperature ZTE phones?

The operating temperature ranges from (-10C) to (+ 50C).

What does ROOT mean?

ROOT is "administrator rights". ROOT allows you to change system files, modify the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling ROOT rights can harm your operating system.

How to enter Recovery mode?

In the off state, simultaneously hold down the volume button (increase +) and the power button.

What if the battery is not 100% charged?

The battery of the device is designed in such a way that it dissipates part of the charge received and can subsequently be recharged. This feature designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact an Authorized ZTE Service Center.

How can I add Google account into the apparatus?

1. When you turn on the smartphone for the first time, you will be prompted to register new google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time you can register a new or use an existing account: Settings-> Accounts and "add account".

How do I enable USB debugging? How do I get access to the Developers menu?

Enter "Settings-> About phone-> Click on" Build number "a few times. Then you will have access to the" For developers "submenu. In this submenu there is" USB debugging "and other functions for developers

How do I connect my phone to a PC?

Follow the steps below to install the driver (automatically).
1. Connect your phone to your computer.
2. When connected, select " Virtual disk"or" Virtual CD "depending on the model.
3. The computer should determine additional disk, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings-> For Developers" and enable the "Disk driver". (10 times click on "Build version"
5. When you enable (USB Debugging), the driver will also be automatically installed.

What do the letters E, G, H mean?

When the phone's data transfer is active, the following symbols appear on the status bar (indication of signal reception, battery capacity, etc.):
- E means active work of the EDGE protocol
- G means active work of the GPRS protocol
- H means the active work of the HSDPA protocol, which is part of WCDMA

How do I update the software?

We provide you with different ways to update the software, namely: update using a memory card or update "over the air".

To update "over the air" you need to connect to a wireless network Wi-Fi or GSM Internet connection and check for updates in the settings.

What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?

A smartphone is a complex electronic device that includes the functions of a pocket computer and a cell phone, and consumes a large amount of energy to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transmit-receive path. The brightness of the display is automatically set to maximum in very bright environments (sunny day) or manually set by the user. Maximum brightness consumes maximum power. During GSM operation and with stable and stable reception "at maximums", the device consumes a minimum amount of energy to maintain communication. In case of an unstable and weak network signal, the machine needs more power to maintain communication. In the case of "Search Network" in an area with no network, the device consumes the maximum amount of energy, which is spent on searching for the nearest base stations. To reduce the energy consumed by the phone, you need:

1. Disable GPS if not required.

2. Disable mobile internet if not needed.

3. Disable or remove unnecessary unused applications. they are active and consume the internal resources of the apparatus.

What should you do if the phone freezes, does not turn on or reboots?

Most of the time, third-party software or programs are the cause of the restart or freeze.

1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option in the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data / factory reset". The way to enable "Recovery mode" is described below in the paragraph "How to enter Recovery mode?".

2. If a factory reset does not help, update the software. The software update methods are described in the "How to update the software?"

3. If the software update does not work, please contact your nearest ZTE Authorized Service Center.

How do I back up my data, notebook or Back-up?

There are 3 ways to back up:

1. In the phone settings in the "Restore and reset" submenu, check the box for restore.

2. You can transfer the necessary information to your computer using a USB cable.

3. You can make "Back up" using a third party program.

What if I forgot my password or pattern to unlock the screen?

If you have forgotten your pattern or digital password to unlock the screen, you need to carry out the reset procedure to factory settings: 1. Turn on the device in "Recovery mode" and select "wipe data / factory reset". 2. If the procedure is not followed, it is required to contact a ZTE Authorized Service Center.

How to use wireless networks (Wi-Fi, BT)?

1. Turn on Wi-Fi in the device settings. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.

2. The device will automatically start searching for active Wi-Fi networks in the access zone from 5 to 50 meters to the access point (depending on the power of the access point).

3. Select the network you need and click on it. If your wireless network is protected by a password, enter it.

4. After connecting to the desired network, the Wi-Fi icon will appear on the main screen of the device.

How to turn on the distribution of the Internet on the phone (USB modem or WiFi router)?

There are two ways to enable tethering on your phone. The first way is to enable the distribution as a USB modem, the other is to enable the distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:

1. USB modem - the method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings-> Wireless networks-> More" Modem mode - check the USB-modem checkbox. Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB-modem or simply disconnect the cable connection.

2. WiFi router - make sure you have a stable internet connection via a mobile network or USB. "Settings-> Wireless networks-> More" Modem mode - check the "WiFI access point" checkbox. To secure your wireless connection, tap on the hotspot icon then tap WiFi hotspot. In this menu, you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"

How can I quickly see the charging status?

Press the power button while charging. The battery charge status will be shown on the main screen of the phone.

Why is the volume of free memory of the device less than stated by the manufacturer?

Unlike a processor, which has its own built-in memory, other devices, such as a video processor, an audio processor, and other devices included in the element base of the device's central board consume user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of an overflow, the user memory is used.

What types of device lock can I use?

There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.

1. Locking with a pattern

2.Pin-code lock 3.Password lock

What is the operating temperature of ZTE phones?

The operating temperature ranges from (-10C) to (+ 50C).

What does ROOT mean?

ROOT is "administrator rights". ROOT allows you to modify system files, modify the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling of ROOT rights can harm your operating system.

How to enter Recovery mode?

In the off state, simultaneously hold down the volume button (increase +) and the power button.

What if the battery is not 100% charged?

The battery of the device is designed in such a way that it dissipates part of the charge received and can subsequently be recharged. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact an Authorized ZTE Service Center.

How can I add a Google account to the device?

1. When you turn on the smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time you can register a new or use an existing account: Settings-> Accounts and "add account".

How do I enable USB debugging? How do I get access to the Developers menu?

Enter "Settings-> About phone-> Click on" Build number "a few times. Then you will have access to the" For developers "submenu. In this submenu there is" USB debugging "and other functions for developers

How do I connect my phone to a PC?

Follow the steps below to install the driver (automatically).
1. Connect your phone to your computer.
2. When connected, select "Virtual Disk" or "Virtual CD" depending on the model.
3. An additional disk should be detected in the computer, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings-> For Developers" and enable the "Disk driver". (10 times click on "Build version"
5. When you enable (USB Debugging), the driver will also be automatically installed.

What do the letters E, G, H mean?

When the phone's data transfer is active, the following symbols appear on the status bar (indication of signal reception, battery capacity, etc.):
- E means active work of the EDGE protocol
- G means active work of the GPRS protocol
- H means the active work of the HSDPA protocol, which is part of WCDMA

ZTE Geek 2 Pro is a brand chinese smartphone, which received 3 points for performance. Here you can download firmware (for all operators, firmware ROM), find out how to reset the settings or get root, There are also instructions on the ZTE. This smartphone is quite productive. On board has - MediaTek MT6592M, 1400 MHz

Root on ZTE Geek 2 Pro

How to get the root for ZTE Geek 2 Pro see instructions below.

Try initially universal utilities for getting root on MTK for Geek 2 Pro

  • (root in one click)
  • (collection of root utilities in one)

If it did not work and SuperUser did not appear, then ask for help in a special topic

Specifications

  1. Type: Smartphone
  2. Operating system: Android 4.4
  3. Case type: classic
  4. Control: touch buttons
  5. Number of SIM-cards: 2
  6. Mode of operation of multiple SIM-cards: alternate
  7. Weight: 130g
  8. Dimensions (WxHxT): 69.8x139.3x7.8mm
  9. Screen type: color IPS, 16.78 million colors, touch
  10. Type of touch screen: multitouch, capacitive
  11. Diagonal: 5 inches.
  12. Image size: 800x1280
  13. Automatic screen rotation: yes
  14. Ringtone type: polyphonic, MP3 ringtones
  15. Vibration alert: yes
  16. Camera: 13 million pixels, LED flash
  17. Camera functions: autofocus
  18. Video recording: yes
  19. Max. video resolution: 1920x1080
  20. Max. video frame rate: 30 frames / s
  21. Front camera: yes, 5 million pixels.
  22. Audio: MP3, FM radio
  23. Dictaphone: yes
  24. Headphone jack: 3.5mm
  25. Standard: GSM 900/1800/1900, 3G
  26. Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, HSPA +
  27. Interfaces: Wi-Fi 802.11n, Bluetooth 4.0, USB
  28. USB-host: yes
  29. Satellite Navigation: GPS
  30. Protocol support: POP / SMTP, IMAP4, HTML
  31. Processor: MediaTek MT6592M, 1400 MHz
  32. The number of processor cores: 8
  33. Built-in memory: 8 GB
  34. Volume random access memory: 1 GB
  35. Memory card support: microSD (TransFlash)
  36. Additional SMS functions: text input with dictionary
  37. MMS: yes
  38. Battery capacity: 2300mAh
  39. Sensors: illumination, proximity
  40. Book search: yes
  41. Exchange between SIM-card and internal memory: there is
  42. Organizer: alarm clock, calculator, task planner

ZTE Geek 2 Pro review

The phone is, in principle, not bad if you look at the branch of budget phones. Cool design, decent cameras, generally clear pictures on the street, little memory for applications, but I think everyone has Chinese phones such a disaster. The connection catches on 3+ too many junk applications that can not be deleted without root. But everything is fine, my wife liked it.

»

Firmware for ZTE Geek 2 Pro

√ Official firmware for TWRP -
√ Stock firmware for SP Flashtool -
√ Geek_2_ProV1.0.0B06 Firmware -
√ Custom MIUI firmware v8 7.2.23 -

Firmware for ZTE Geek 2 Pro you can find in the thread In addition, pre-download the necessary software for flashing

What information do you need to know for flashing?
  1. Brand / Model [desirable] - ZTE / Geek 2 Pro
  2. Processor - MediaTek MT6592M, 1400 MHz
  3. LCD Driver (version)
  4. Kernel (version) [desirable]

Before flashing and in the process of selecting the firmware, check the basic TX ( specifications) through the program

What are custom firmware(firmware)?

  1. CM - CyanogenMod
  2. LineageOS
  3. Paranoid Android
  4. OmniROM
  5. Temasek's
  1. AICP (Android Ice Cold Project)
  2. RR (Resurrection Remix)
  3. MK (MoKee)
  4. FlymeOS
  5. Bliss
  6. crDroid
  7. Illusion ROMS
  8. Pacman ROM

Problems and disadvantages of a smartphone from ZTE and how to fix them?

  • If Geek 2 Pro won't turn on, for example, see White screen, hangs on the splash screen or the notification indicator only blinks (possibly after charging).
  • If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
  • Doesn't charge (usually iron problems)
  • Doesn't see the SIM card (SIM card)
  • The camera does not work (mostly hardware problems)
  • Sensor does not work (depending on the situation)
For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for ZTE Geek 2 Pro

  1. Settings-> Recovery and reset
  2. Reset settings (at the very bottom)

How to reset your pattern

How to reset your pattern if you have forgotten it and now you cannot unlock your ZTE smartphone... On the Geek 2 Pro, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

  1. Reset graph. blocking -
  2. Password reset -

How to Flash ZTE Geek 2 Pro Firmware

Flashing ZTE Geek 2 Pro stock firmware only requires having your ZTE Geek 2 Pro stock recovery.

SELECTED JUST FOR YOU

ZTE Star 1 S2002 Firmware Download

Why we need ZTE Geek 2 Pro Firmware

It's always advisable to backup ZTE Geek 2 Pro Firmware after purchasing it. You are going to need it for the following reasons.

  • Downgrade or Upgrade ZTE Geek 2 Pro.

You can use ZTE Geek 2 Pro Stock rom to downgrade your smartphone or upgrade your smartphone. It depends on the release of the firmware or your choice if the option is available.

  • Unbrick ZTE Geek 2 Pro.

ZTE Geek 2 Pro Stock Rom can also be used to unbrick any ZTE Geek 2 Pro. Smartphones can be bricked in the process of rooting or flashing a custom firmware or rom or recovery.

  • UnrootZTE Geek 2 Pro.

You can also use ZTE Geek 2 Pro stock firmware to completely unroot any ZTE Geek 2 Pro smartphone. You also can regain your warranty by properly flashing the official ZTE Geek 2 Pro stock firmware. It can be done by reverting back to the official stock firmware of ZTE Geek 2 Pro if your smartphone has tampered.

  • Fix Issues on ZTE Geek 2 Pro.

Your ZTE Geek 2 Pro might develop issue which might be unknown to it you, if it a software related issue, you can restore and fix it by flashing the stock firmware for ZTE Geek 2 Pro. Today, we are presenting all the Official Firmware, both Official releases and updates following it. You can download all of ZTE Geek 2 Pro Firmware here. If you experience any problem with any of the files, don’t hesitate to tell us.

SELECTED JUST FOR YOU

ZTE Scend Firmware Download (Z791)

Requirements to flash ZTE Geek 2 Pro Firmware

  • A working detectable USB Cord.
  • A Windows PC.
  • A Good Battery Backup
  • ZTE Geek 2 Pro Stock recovery.
  • ZTE Geek 2 Pro stock firmware

Note that flashing a ZTE Geek 2 Pro firmware to your phone might erase everything in your phone including contents in internal storage. It is always very advisable to backup your contents to an external storage or a PC. If your phone is bricked and can’t be accessed, I guess there is nothing you can do.

Follow this procedure below if you wish to flash ZTE Geek 2 Pro Stock Rom.

SELECTED JUST FOR YOU

ZTE G601U Firmware Download


ZTE Geek 2 Pro

How to Flash ZTE Geek 2 Pro stock rom

  • For you to flash ZTE Geek 2 Pro, you will need your stock recovery.
  • Download the firmware to your PC or phone and extract the zip file.
  • Inside the zip file, there is another zip file for the firmware.
  • Rename the firmware to update.zip or just leave it the way it is.
  • Copy the downloaded firmware to the root of your SD card.
  • Boot your ZTE Geek 2 Pro to recovery by powering it off.
  • Press Volume Up and power button or press both volume up and down and Power button simultaneously to boot to recovery.
  • Choose apply update from SD card.
  • Select the Update.zip or the downloaded stock firmware file and the flashing will start.
  • Once it finishes, wipe data and reboot your phone.

Disclaimer.

I won’t be responsible for any harm that might come to your phone. Please, make sure you are flashing the right firmare, stock rom, or flash file to ZTE Geek 2 Pro.