Controlled electrical outlet with their own hands. Smart Rosettes with Remote Control: Description

And so everyone who wants to make a "smart" rosette with solitaire and vomiting, this guide is offered! Features of this product: The socket will be embedded, manage both through Wi-Fi and via the Internet. You can also see the status of the socket. And if you are not too lazy, then with temperature sensors, illumination, vidio camera and anything else!

It is necessary to check the performance of the diagram itself. In fact, the WEMO Switch emulator, the difference is that our will be integrated into any socket, and fit perfectly into the interior.

What we need to implement our plans:
1. In order to manage the operation of the socket through Wi-Fi, we will need a controller module with WiFi.
2. Relay on 16A 220V.
3. Power supply to these two modules with voltage 5 V
4. Well, and naturally peavern, where without him.
5. And even more so do not do without the socket itself!
6. It would still be not bad to make a LED for indexing on / off.
Here are all components:

We solder wires to the design:

Insulating wires and contacts:

Then all this put in the opposition and attach to the socket itself.

As for the software, the programming skills are needed. If you have such, it is recommended to use a lightweight web server, the most simple Basha scripts, although it is quite possible to put a minimal assembly of python under our goals.
Otherwise, you should look for a solution to the problem on the forums or copy software official version This outlet. You can find them a big set both on the sites devoted to programming, and just in the configuration of online stores.
Check for performance. And so the relay, the LED and the voltage of the socket normally. Well, the first step towards the perfect outlet was made. The cost of all components can be estimated at about 1,500 rubles.

And the main thing is not to be afraid to go to experiments, there is nothing complicated, take a soldering iron with a thin stress and go!

Perhaps you will be shaking hands, but it is only the first five minutes, as we will be very comfortable, you will be sure and racks as granite.

Important note:
The socket is usually closer to the floor (with the lessons of physics you must remember that hot air goes up, and cold is heavier-down), so the thermostat indicator will not be completely correct - it is worth considering if you are guided by them for the regulation of heating.

Why do you need Wi-fi socket? Its main purpose is to control the electrical devices that are in the house, at a distance. The device is running due to connecting it via Wi-Fi wireless network or mobile smartphone. Smart electropurting increasingly conquers the electrical product market, so in this article we decided to tell about which principle of operation, device and function Wi-Fi sockets.

Varieties and characteristics

Principle wi-Fi works Outlet of any type is absolutely the same. As for the design, it is divided into two types: overhead and embedded. The invoice has a form of an adapter, which has one connector. The design of the device consists of such elements: the housing itself, the indicator, the button, with which the device and the Wi-Fi module turn on or turn off. The second option is an embedded module. His appointment is a replacement of an ordinary electric point. The photo below shows both options:

The principle of operation of two species is that due to the microprocessor, which is inside the device, is connected to the control mechanism that adjusts the inclusion or shutdown. But more complex models that are manufactured in the form of a network filter, which has several connectors, can come across.

In addition, there are models that include additional sensors, with which it is possible to determine the gas leak, the presence of smoke or leakage of water, as well as motion sensors and temperature.

Each Wi-Fi socket depending on the manufacturer and the model has a special technical characteristics. Manufacturers' company constantly seek to improve their development and regularly contribute their additions and innovations. The main differences are:

• originality in the design of the device and its packaging;
• the quality of the material used;
• the items from which the product is produced.

Wi-Fi The socket of any model consists of a housing that is made of heat-resistant plastic, and various elements that fill this case. The use of non-combustible materials allows you to protect a person from the allocation of harmful halogens. The heat resistance of the material is 748 degrees Celsius. Thanks to this, manufacturers guarantee the safety of using Wi-Fi Equipment.

Main functions

Purpose and scope of Wai Fi Otset is described in the following functions:

• turning on and off household appliances on distance;
• due to the temperature sensor, fire safety is provided at home;
• it is possible to control and recognize the testimony of electricity, which consume electrical appliances operating from this device;
• if necessary, you can reboot the technique;
• the implementation of the control of children due to the presence of a timer, which turns off the TV or light after a certain time.

Terms of use

Wi-Fi rosette, as a rule, operates in the operating voltage range of 100 - 240 V (referred to use in domestic or office conditions). The output power has its own interval, which ranges from 2 to 4 kW. Due to this, it is possible to connect devices with large short-term loads. For example, heater, electric kettle or food processor.

Despite the fact that all manufacturers create their individual instructions for using the device, the principle of operation and their purpose is almost the same. The difference is only in additional setting specific parameters and functions with which Wi-Fi rosette has.

First you need to install a special application on your smartphone or tablet. Then check if there is a home connection wireless Internet. On the box or in the instructions of the device there is a QR code with which you can access the software you want to download.

After that, it is necessary in the program to find an option that will look for a new Wi Fi connection. Opposite the necessary wireless network A window appears in which you want to enter a password for connecting. After confirmation of the password, Wi-Fi socket connects to a 220V network and is turned on by pressing the on / off button. The LED indicator indicates that Wi-Fi rosette is ready for further operation.

After all the settings are made, and the required functions are installed, any household appliance can be connected to the connectors and implement individual settings for it. How to make it correctly indicated in the instructions. If there is a need to reset all settings to factory, it is enough to press the instrument on / off button for six seconds and the socket will return to the initial position in which it was produced from production.

Advantages and disadvantages

The main advantage is that thanks to such a smart device can be controlled by electrical appliances. Of the shortcomings, the following can be distinguished:

1. If the electricity is turned off, then all the settings are reset and they must be installed again.
2. There are models that are incompatible with the router. To fix it, you need to call the masters, since only his experience and knowledge will help to correct the situation.
3. Wi-Fi socket has its time zone, which may not coincide with real. This is due to the fact that the instrument is installed that time zone that has a manufacturer's company. This leads to an independent adjustment of the system.
4. If an emergency failure occurs in the electrical network, then the devices are automatically disconnected.
5. Change the job and the functions of the device is possible only if there is one wireless network. If they are different, it will lead to negative results.
6. If there is no Internet connection, then the device will not connect to the Time specified in the settings. This is explained by the fact that all settings and changes are saved on servers that do not work without the Internet. A special microchip, which will turn on the memory block, no.

I really wanted to make my own "intelligent" socket, with lotto and ridges. Built-in (in the house - hidden wiring). With control via WiFi (locally) and the Internet (globally). With the receipt of current status (in the future, with consumption information). With the connection of multiple sockets in one block (up to four). With temperature sensors, illumination and presence. With a video camera, in the end!

The first part is simply checking the overall performance of the scheme. In essence, a certain analogue of WEMO SWITCH, only embedded in standard converter and therefore not tied to some particular design (to fit into any existing interior).

So what do you want? I want to manage independently each of the four sockets (I have at home in one of the rooms of the sockets combined into blocks of two two-time modules close to each other, in two standard plastic submersors, respectively). All units are connected to one of these blocks (lighting, filter pump, heater, compressor) aquarium with a beautiful pachovomycom, and we will manage. Somomik in the photo is higher, if that (picture to attract attention).

So, what do we need?
1. Get commands via WiFi and issue the appropriate control signals for contacting the contacts. Those. We need a controller module with WiFi. Since I have our handker on the AR9331 (piano in the bushes, yes: Actually, it was originally, and I wanted to try it in real case), it will be such a controller.

2. Relay on 16A 220V. In order not to bother - took a ready-made module from the ampere. At the same time there and the LED is to indicate the operation mode of the socket.

3. Patient these two modulus voltage 5V. Disassembled a compact power supply with USB connector.

4. Squeezing with a depth of 60mm.

5. The socket itself (so far for the experiments took the first thing in the neighboring shopping store):

6. LED to indicate the mode of operation of the socket (ON / OFF). I found green and red in my bedside table. At first I wanted to use green (I like the color more), but it was not bright enough, so as a result I took red.

I figured the scheme (primitive, yes):

Designed components:

Cut the wires, sealed:

Cut off pieces of heat shrinking tubes, the modules have hydrated:

Loaded everything into the pickle, connected the cable, connected to the outlet. While it is still early to shove in the wall, you need to get yourself on the table.

In order for the LED to be visible better, the sketch of the soldering iron did a small hole in the outlet.

Test stand ready.

Software for the initial simple check took from the wow. Ariman "a.

Well ... no longer, but everything works. The relay snaps, the LED blinks, the electricity in the outlet is served. The first step is made. Time left somewhere a half a half a total. Money:
1. The controller on AR9331 - I do not even know how to evaluate. Let it be 750r - at such a price we are going to sell it when we make a batch.
2. Relay module - 290r.
3. Power supply - Well, let it be 200r (I saw in the transition underground at that price, my I have been lying around for a couple of years).
4. Podrottor - 45 rub.
5. Socket - 120r.

TOTAL: 1405р.

Now you need to bring to mind soft (first of all - firmware). About this - in the next part, if the people are interested. And then I will connect sensors and three more relay modules to control four sockets, and not one.

P.S. Camera connected - works where it goes? But it is necessary to inscribe it somehow in the interior, not yet invented - as ... and in terms of software - it is necessary to learn how to broadcast the flow to the Internet, and not just in the LAN.

Modern intelligent systems provide comfort and reliably protect against unforeseen situations. One of the elements such systems are smart outlets.

In the above article, consider only important and interesting questions:

• What features concept smart home?
• What is a smart socket than it is useful and how does it work?
• How to control the device, and from which elements it consists?
• What kinds smart sockets happen, and what are their features?
• How to choose and connect different types of different types?

What implies the concept of a smart home?

Intelligent System "Smart Home" for a long time not new on the market modern technologies. Its feature is to automate the processes inside the apartment or house. Of course, there are still many discoveries ahead, but much of the planned implemented and successfully works today.

The smart home system combines the entire housing electrician, which allows the owner to manage various equipment, whether it is air conditioning, TV, security system devices and much more.

The constituent element of the modern house is a smart socket - a device designed in one of the scientific institutions in Germany.

The electrical equipment connected to it or the apartment becomes the owner under control. The user can control the device sitting on a beloved chair or being thousands of kilometers about home.

But in Italy developed their decision on the platform. The system has open codeSo it is more flexible in terms of designing electronic devices.

Partially to this concept smart House relate and.

The principle of work smart sockets

The first smart sockets were controlled only by sending SMS messages or a call from a mobile phone. Inside the product installed the GPS module, as well as the SIM card.

In addition, a special application was installed to control the instrument on the smartphone, which allows you to interact with smart sockets and connected to them electrical equipment.

Now more modern devices are managed via the Internet, and in some models is additionally provided uSB adapterwhich commutes with the router and tracks the commands submitted from the computer or phone. Signals are fed to the hardware of the device, after which the technique is transmitted.

The average distances on which they are accepted external teamsIt is about 30 meters. Each product has an individual IP address, which ensures security and encryption of the transmitted information.

Thus, the intelligent socket consists of two main elements:

• The controller that receives external signals, and after transfers them to the electromagnetic relay.
• The relay is a device that, after receiving the signal from the controller, closes or opens the chain.

Signal to the smart socket is made in one of the following methods:

• Through the Internet;
• By call;
• By sending an SMS message.

What is useful smart socket, its functions

Initially, smart sockets were developed for private houses, where there is a house area in need of regular care. It is easy to explain.

Owners of the house need from time to time to turn on plants, additional lighting or electrical equipment. It is not always possible to come home to solve the tasks set. What to say about the need to open the gate in cold weather.

In such cases, "smart" equipment, providing additional comfort, is actively applied.

With regard to our household, the benefits of smart sockets are indispensable:

• The ability to remotely turn on the kettle or coffee maker, lying in the morning on the bed. Released a few minutes can be used to solve other tasks.
• Programming outlets on the power on the electrical appliance at a specific time.
• The inclusion of heating devices shortly before the owner's arrival from work, if at this period the housing remains empty. With this approach, it is possible to save electricity.

Smart sockets are reliable assistants of scattered people who constantly forget about the disconnection of one or another device.

Now there is no need to return home to make sure the iron is turned off. It is enough to go to a special application on your phone or send to a specific SMS message number.

Special sockets allow you to automate the work of home equipment - computers, routers, televisions, security systems. In addition, the use of such products is the ability to protect the house or apartment from the penetration of other people.

By sending a short message or pressing the button in the application, you can enable light in the apartment, music Center Or other electrical appliances that denote the finding of a person in the apartment.

Thus, the functions of smart sockets can be attributed:

• Getting remote access to control (inclusion and shutdown) household appliances - air conditioners, convectors, ovens and other devices.
• Control of temperature, gas supply, humidity and other important parameters in the apartment.
• Alert the owner of the voltage shutdown, as well as de-energizing electrical equipment. Thanks to this feature, it is possible to quickly reveal and eliminate the breakdown.
• Restart office equipment if necessary or schedule. The possibilities of smart sockets allow you to program the device to various modes.
• Measurement of energy consumed.

Control

The control process is simple and accessible even to the novice user. All that is required - availability of a connected network or mobile communications.

The principle of gsm-outlet is as follows:

• Seizure of the product from the box, installing the SIM card of any of the operators.
• Connecting the device to household voltage 220 volts of the home network.
• Installing a plug of one or more managed devices into a smart socket.

To control the device through a smartphone, you need to make a smart device number to a book with telephone numbers. Basic SMS commands are preferably saved in a mobile phone and use them if necessary.

They can be sent not only by SMS-messages, but also with special applications on android or iOS.

Smart socket takes commands up to five numbers, which is additional protection From outside interference or failures in work. In addition, only those phones from which are planned to control the instrument can be made to the number of the rooms.

If the apartment or the house has a socket, capable of working via the Internet, here the control principles are even easier.

To deliver the command, it is enough to install a special application or go to a web page from a computer and see the actual state of the instrument - disabled or enabled.

Besides, in personal Cabinet User Paste Parameters such as a change schedule temperature mode and humidity.

Features of the device

The main feature of smart sockets is the fact that they are suitable for connectors most of the modern technology. It is worth considering that capacity limit is 3 kW. This, as a rule, is enough to connect a powerful receiver, such as heating radiator, boiler or.

Embodiments of the smart socket set. The simplest includes products having a single connector, and to more advanced - several sockets (up to 3-4), made in the form of a network filter.

In addition, it is possible to combine a group of sockets into one network for interaction between the radio communications.

Disabling power does not lead to failures in the work of the smart socket, because inside it is provided by a spare power source. It is enough to send SMS messages and warning the owner to reduce or disconnect the voltage.

If the device is able to work via the Internet, mailbox The owner is sent "alarming" letter with information about the loss of nutrition.

If the apartment or house provides a security system, it also continues to work a certain time.

In the new versions of the smart sockets, a timer is provided, which allows you to set the time of operation of a specific device or program it on switching on or disconnection.

As an additional function, a special thermometer can be provided for controlling the temperature regime.

Types of devices

With the growing popularity of smart sockets, and pure offers, which are available to customers.

It is difficult for a novice user to decide on a suitable design, because they all differ in the installation method and the control option. Consider the main types of products in detail.

By type of installation, smart sockets are:

By the method of managing smart sockets are:

• With SMS control;
• Radio-controlled;
• With the ability to file the command on the Internet.

According to constructive features are divided into types:

• Single devices - with remote control.
• One socket with multiple control outputs. Each of them is able to receive commands about the inclusion or disable device.
• Several outlets, where one of them performs the function of the main thing, while others depend on it, while the main one can control the group of other connectors.
• Extension (network filter). The peculiarity of the product is that the commands are served simultaneously to all outputs or for each separately.

Overhead - pros and cons

The advantages of intellectual type sockets should include:

• Wide selection of models. You can choose a device that is suitable for design and control type. Modern models managed through the phone or the Internet.
• Ease of installation without performing complex mounting works.
• Easy configuration with which even a beginner user can cope.

Disadvantages:

• During operation, interruptions are possible due to the poor quality of the GSM signal. Within the city, the problems rarely arise, but for the territory of the settlement there may be interruptions with communication. This is confirmed by the reviews of people who use such products in everyday life.
• The ability to manage a smart outlet depends on the payment for the phone and / or internet. These moments are important to take into account.
• Bulkyness is not always a plus for external view interior.

Embedded smart sockets

Built-in products are mounted in the wall on the same principle as ordinary outlets. When choosing the buyer has two ways - redo the wiring or leave everything as it was.

In the first case, the specialist plans to place the instruments that are installed in certain parts of the house or apartment, after which there is a layout, and the control is currently occurring using an SMS controller.

The second option is to leave a wiring unchanged. In this case, the SMS controller is mounted on an electric shield, which eliminates the ability to control only one socket.

For example, the user does not work out to turn off the router and do not pay off the desk lamp installed in the same room. This is due to the fact that several sockets are usually included in one group.

SMS, GSM Sockets without and with temperature sensor

Smart GSM outlets are special products that can be controlled using a mobile phone. For their full-fledged work, several components are required - the phone with a good SIM card, the smart socket itself, as well as another card for SMS messages.

On the back side The device has a special connector in which SIM card is installed.

On the other hand, the connector is provided in which electrical appliances are included. About the presence of food can be judged by the special indicator.

GSM sockets can be controlled remotely, the main condition is the presence of a stable cellular network in a place where it is installed.

Some models send a message to the owner when there are voltage interruptions or if it is turned off. Managing such sockets can be carried out using a special application. It must be downloaded and put on a smartphone or tablet.

Depending on the model, the list of features and capabilities of the device may vary. For example, in some models, the temperature sensor is mounted, the opening indicator of the door or humidity.

In more modern devices, it is possible to program - switch on and disconnecting the device at a certain time (day, week).

Management is performed using a custom timer and an external microphone.

In advanced GSM outlets, its battery is provided, providing operation for 12 hours even with a disconnected electricity with information about the owner of what happened.

We highlight the most interesting models.

GSM Socket Simpal-T4

It has a temperature sensor, has the ability to remote control from the phone. It is used to connect the devices with a capacity of up to 3.5 kW.

The features of the model should include the presence of the function of measuring air temperature, the ability to control the schedule and according to the temperature sensor, the presence of manual control.

For ease of use, you can install the application into a smartphone and manage the product by pressing the necessary buttons.

The range of the measured temperature is from -10 to +50 degrees Celsius, the presence of an integrated battery and small dimensions - 11 * 5.5 * 3.3 cm.

Sapsan Pro 10.

Device with the ability to control by submitting SMS commands. Supports the installation of SIM cards of various operators.

An intelligent socket is capable of performing thermostat functions due to the presence of a temperature sensor. Turning on / off occurs with the specified settings.

Of the basic functions, it is worth highlighting a remote reboot or enable / disable the device, as well as a notification of power loss. Management is possible by timer, SMS, by calling or manually.

The maximum plug-in load is 3.5 kW, there are alarming outputs. dimensions - 8.4 * 132 * 71 cm.

Senseit GS1

Model with the possibility remote control using a mobile phone. Designed to connect devices with a total load of up to 3 kW.

The device can work automatically on the schedule and temperature sensor. The SMS message includes information on temperature in degrees Celsius.

The features should include the presence of mobile software, a wide range of temperatures (from 0 to 40 degrees), the presence of alarming outputs and small sizes - 8.4 * 13.2 * 7.1 cm. Included there is an instruction in which the principle of operation is described in detail and model settings.

Senseit GS2 M.

Smart socket with SIM card, which is controlled by SMS. The function of the device allows you to enable and disconnect the electrical equipment in the house or apartment, as well as control the socket itself.

Such a model is suitable for connecting the air conditioning, power supply, water supply, computer, charger And other equipment. The maximum load is 3.5 kW.

Distinctive features - the presence of a temperature sensor, a large radius of action, the ability to work through the app for Android and iOS.

The possibility of planning work on a schedule and by manual inclusion is available. Maximum distance for optimal work Devices - up to 100 meters.

Telemetric T4.

Device that allows you to manage various equipment in a house or apartment via SMS.

Includes a temperature sensor that allows you to adjust the power and shutdown function when a certain temperature is reached.

The smart socket is capable of turning on and disconnected by the SMS command and when a certain temperature is reached.

In addition, the model notifies the owner on the output of the temperature mode for the set limits, to reduce the voltage or worsening of the GSM signal.

The maximum power of the connected devices is 3.5 kW. In addition to this model, smart sockets, there are other options - T20 and T40.

How to connect and configure

The feature of smart GSM sockets is the simplicity of connection and subsequent setting. A person will easily cope with the experience of electrical installation work or who does not speak the rules for the use of a special tool.

The algorithm is:

• Make sure that the "Smart Home" technology will be applied and resistance.
• Buy a Megaphone SIM card, MTS, biline or another operator and a suitable GSM outlet model.
• Check that according to tariff plan It was possible to send and receive SMS messages.
• Fill up the account of the purchased card and turn off the PIN query (password) during the entrance.
• Carefully learn the instruction that comes in a smart socket with remote control.
• Install the SIM card in the appropriate slot for this.
• Insert the product to the stationary socket to which the equipment will be connected.
• This connection is completed.

Now you need to adjust the equipment for correct work in the future. Start by checking the performance of the module, for which pay attention to the special indicator - it should shine.

Now you need to "bind" the number of the SIM card to the product, following the instructions in the kit.

Programming principles may differ taking into account the characteristics of the model. Here a lot depends on the manufacturer, as well as the type of smart socket.

To correctly install all the parameters, carefully examine the instruction manual. Remember that setting up products of various manufacturers has differences.

When installing and operating smart GSM sockets, it is worth considering the following rules:

• Do not exceed the maximum permissible load, which is installed by the manufacturer.
• Do not connect the outlets of this type outdoors, near the washbasin or stove, high temperature, dust and moisture can adversely affect their work.
• When programming numbers, remember that their number for different models Individually. Some devices provide protection from mailings or calls from other numbers.
• Consider the minimum and maximum distances between the instruments during the installation process.
• The presence of good GSM coverage is mandatory condition For stable operation of the device.

Video on the connection and settings on the example of the model of telemetric 4.

Smart Wi-Fi Sockets

Considerable demand uses products that work on a wireless network. Consider their features and popular models in detail.

How to work, device

The popularity of smart Wi-Fi sockets is due to the presence of additional options in many models, namely, the built-in camera, various indicators (temperature, humidity and movement), customizable timers and other possibilities.

Some manufacturers offer smart sockets in which several control options are available - via the Internet and SMS.

For example, in the absence of the Internet, you can send a message, and the device will perform its task. An important plus is the ability to control through special applications on iPhones and smartphones (for example, through the Ready for Sky application).

On Wi-Fi models, there is an enable and shutdown button, a running indicator, grounding and a spare battery (in some models). The presence of the latter provides the command to the owner even when the power loss.

The device runs on the basis wi-Fi network - 802.11 b / g / n. The frequency is 2.4 GHz. After connecting to the router, the intelligent socket gets an individual IP address. Management, as noted above, can be done from any mobile Device.where the appropriate application is installed.

Up to 50 dependent products can be connected to the control outlet with their subsequent combination general Network. This installation provides automation in the office or home.

Review models

A brief overview of popular smart sockets with Wi-Fi, which are worthy of attention is shown below.

Redmond Skyplug 100s.

A unique model providing the ability to control any equipment in a house or apartment.

Any devices that have a power up to 2.2 kW are connected to the product. It may be a PC, washer, Air conditioning, TV or other equipment.

The characteristics of the model should include the use of heat-resistant plastic, protection against electric shock (class 1), the possibility of manual and remote control, switching via Bluetooth V4.0.

The model has protection against voltage drop. Dimensions - 4.5 * 4.5 * 7.1 cm. The kit comes in the kit itself and installation and setup instructions.

Redmond Skysocket RSP-R2S

It is distinguished by a reliable dust and moisture-proof enclosure. Thanks to this feature, the model can be installed not only in the apartment or house, but also in the garage, bathroom, in the country or stock.

The temperature range in which Redmond works is from 0 to 35 degrees Celsius. The maximum current of the current 16a is that for the household network 220V is equivalent to 3.68 kW.

There is protection against electricity lesion (1 class) and from voltage drop. Management is remotely or mechanically.

There is the ability to connect to other sensors or equipment Ready for Sky Guard.

Works in the temperature range from 0 to 35 degrees Celsius. It has dimensions 11.5 * 60 * 80 mm.

HS100.

A device developed by TP-Link, capable of working on a schedule. Provides remote access The control of connected electrical equipment is characterized by a slight setting and has a "no home" mode, which allows you to schedule the power supply at a certain time.

The model works according to the standard IEEE - 802.11 b / g / n protocol. The temperature operating range is from 0 to 40 degrees Celsius.

The product is made of polycarbonate, has dimensions of 10.03 * 6.63 * 7.7 cm. The maximum load is 16a, and the power is 3.68 kW.

HS110

Smart socket from TP-Link. It has the same functions as the model discussed above. Its features should include the presence of monitoring of electric consumption - a function that allows you to view energy consumption statistics over past periods online.

Data transfer is made using the IEEE - 802.11 b / g / n protocol. The operating temperature and humidity is 0-40 degrees Celsius and 5-90%, respectively. Device dimensions - 10.03 * 6.63 * 7.7 cm.

There are two buttons on the housing - to configure and power. The maximum load current is 3.68 kW, and operating voltage from 100 to 240 V.

Broadlink SP CONTROS (SP CC)

With a secured timer for remote control of electrical appliances.

The features of the model should include the ability to specify a specific script, configure via a smartphone or tablet using a special application, the presence of 32 programs for setting up and six types of timers.

Constructively, the model is equipped with a small flashlight, supports the eco-charging function to protect the power source and is made in a compact package.

The upper limit of the load capacity is 3 kW. The product is made of plastic, in white and has an IP44 protection class.

The overall dimensions of the model are 10 * 6 * 7.5 cm. The working humidity is up to 85%, and the optimal temperature mode is from 0 to +50 degrees Celsius.

How to connect TP-LINK HS110 and HS100?

Main manipulations with smart socket are carried out using special utility Kasa that works with operating systems Android 4.1 and above, as well as iOS.

To customize control, it is enough to follow step by step instructionswhich is stitched directly in the utility.

When adding new equipment, Kasa offers to make a choice. Next you need to call the outlet so that in the future it was easier to navigate. For example, if the heater is connected to the smart device, you can write or take a photo.

With the help of the program it is easy to customize the time of work, as well as the activity period (set on the calendar).

The timer option is also provided - the ability to enable or disable the device after a certain time interval.

The feature of the HS110 model is the presence of an indicator of consumption and analytical information. It shows consumption from the outlet for different time intervals.

This connection is completed, and you can use the device. Management is carried out through the program on the phone (remote) or manually.

For detailed instructions for connecting, see the video.

How to connect Redmond?

To use the product model from Redmond, you need to synchronize it with your smartphone using the Ready For Sky application.

Remote control of smart sockets Redmond is made via Bluetooth, on Wi-Fi or via the Internet.

See the video detailed instructions.

Radio-controlled sockets

Another interesting type of smart sockets is radio-controlled, which are controlled by remote control.

How to work, device

Radio-controlled smart sockets consist of two elements - the device itself and the control panel. Also included in the set instructions for setting up and features of application.

Some manufacturers add batteries for remote control. The device is installed in a stationary outlet, after which the usual electrical equipment can be connected to it.

On the case of the radio-controlled analogue, an indicator button is provided for which you can determine the fact of the product response to the command from the console.

There is also a physical impact button that allows you to find the remote control in the case of its loss.

The operating frequency of the device is from 433 to 315 MHz. detailed information Indicated in the instructions or on the device itself.

In the manufacture, high-quality plastic is used, providing long service life.

The features of radio-controlled models should include the ability to receive a signal even through the wall, and the total control range reaches 30-40 meters. In the absence of obstacles - this distance will be higher - up to 100 meters. If you plan to use the device in conditions of high humidity, you need to take models with IP44 protection.

Review models

Consider several offers on the market.

APA3-1500 R Coco / Trust

A set of smart radio controlled sockets with remote control. The kit comes three radio adapter, as well as a control device.

The power of the connected devices must be up to 1.5 kW at the rate for each receiver. The use of auxiliary sensors is allowed.

The distance on which the console acts is up to 30 meters indoors and up to 70 m in the absence of obstacles. The product is made in white color from high-quality plastic. Size of the socket - 9 * 5.3 * 3 cm.

AGDR2-3500R COCO / TRUST

Smart sockets with two radio adapters and remote control. Designed to manage equipment at a distance. Limit capacity up to 3.5 kW.

The range of indoors and on the street is 30 and 70 meters, respectively. Signals are accepted by sockets from six different transmitters. In this case, the remote control can be used for 16 different receivers.

The characteristics of the model should include the moisture protection case IP44, low weight (0.6 kg) and compact dimensions - 6 * 12.3 * 3.7 cm.

How to connect?

To begin with, a smart socket must be combined with the control panel of the remote control, for which you want to press a special button on the remote control and the case.

This is enough so that both devices "found" each other and connected on an affordable radio channel.

If the work is completed successfully, it can be seen on the lighting of the light indicator (located on the case). After you can use the device.

How to choose a smart outlet?

Separate attention is the question of choosing smart sockets. It is worth paying attention to the following aspects:

1. Management methods;
2. Supported maximum power;
3. Standard fork;
4. Connection type;
5. Functionality.

Management method

Managing smart sockets is possible through:

• Remote control;
• App on android
• Application on iOS.
• Remote access.

Smart sockets with a remote control are suitable for use within the house, but the management of them at a high distance is impossible. In this case, it is better to buy analogue in which a special GSM module is installed with a SIM card operator.

In such devices, remote control is possible using the phone. The main condition for stable operation GSM sockets is the presence of a resistant signal.

Recently, several more types of devices are gaining popularity - with Wi-Fi control (switching on and off occurs with a special application) and Z-Wave sockets.

The latter are at the heart of special chips that are compatible with each other and provide the ability to remotely control the device.

Buying smart Z-Wave sockets is relevant in the case when you want to install a lot of devices, because in the complex with these devices you will have to buy and controller, which increases costs.

It is worth noting the smart sockets made using ZigBee technology. They operate at a frequency of 2.4 GHz and are very similar to the Z-Wave system.

Such models are distinguished by the versatility and complexity of technology, so buying a separate device without plans to further expand the system of the smart home is inappropriate.

Maximum power

This is one of the main parameters to pay attention to when choosing. The principle is simple - the total power of the connected devices should not exceed the limitation set by the manufacturer.

Connection type

Here, the principle of all is identical. The difference is that some models provide a universal connector with the possibility of connecting any equipment.

Functionality

Smart sockets can have many additional featuresFor which you need to pay attention to their choice. Here are just some of them:

Separate attention should be paid to the features of application. If necessary, it is better to choose models with moisture and dust with protectedness. These devices provide special curtains that are useful from a security position for children.

Main producers

Smart sockets are manufactured by companies such as Belkin, Everspring, Nodon, TP-Link, Fibaro, Broadlink, Lifesos, Tecsar Alert. Such manufacturers like Redmond and Xiaomi are equally popular in our country.

It is worth noting that most of the models come from China, but this does not affect the quality. Modern devices are reliable, easy to operate and have a long service life.

What to pay attention to when choosing a GSM outlet?

When choosing a GSM outlet, it is necessary to determine where the device will be used, and the devices with what load will be connected to it.

If it is planned to install a product indoor without seaming, it is better to buy Russian-made models that can perform their functions even in the cold. As for the burden, almost all models have a limit of 3.5 kW. Exceed this parameter is prohibited.

When choosing it is necessary to take into account the presence of additional options, such as the ability to measure the temperature, turn on / off for the timer, control via the phone (using the application) and so on.

The more options provided for the manufacturer, the higher the cost of the product. So it is recommended to immediately decide which functions are necessary, and without which you can do.

By the way, the possibility of measuring the temperature is very useful. In addition, the installation of a separate temperature sensor will cost more.

Z-Wave technology

Smart sockets with Z-Wave technology provide remote control of any technique in the house. Such devices can be enabled and disabled, change the brightness and volume of the connected devices, as well as solve other tasks.

The basis of Z-Wave is a special cellular technology in which the devices can act as transmitters and signal receivers.

It turns out a network with routing and the possibility of automatic reconfiguration, taking into account external working conditions. If there is an obstacle on the way, the signal overcomes it and finds the shortest path to the device.

The features of smart Z-Wave sockets should include economical electricity consumption and lack of radio frequency interference.

By the way, the frequency range of devices is up to 1 GHz. The work of Z-Wave products is based on special chips that are well compatible with each other.

The main models of such devices should include Nodon Z-Wave Plus, Fibaro Wall Plug FGWPF-101, EVERSPRING EVR_AN1572 and Lifesos XSW-01.

Zigbee technology

Separate attention deserve smart zigbee sockets, which are based on new technology. According to the principle, it is similar to the Z-Wave described above.

The technology implies the use of a cellular structure, scalability and the ability to expand the network using new devices.

The devices made using ZigBee technology work, like the Wi-Fi network, at a frequency of 2.4 GHz. But here is the difference - the possibility of using different channels.

The features should include the versatility and complexity of construction, so it is pointless to use some one device in a house that works on this principle meaningless.

Today, such a socket on ZigBee Xiaomi Mi Smart is popular. Its peculiarity lies in the possibility of managing the boiler, which gives additional convenience.

How to collect your own smart socket?

I wonder what to collect a smart socket do it yourself really. To do this, you need to have minimal skills, tools and a certain amount to purchase component parts.

Also necessarily knowledge of the basics of programming and electrical part.

To make a smart socket, you will need an external socket, a Wi-Fi-module that feeds the block with a stabilizer (U-3.3 V), a soldering iron and a relay with a "solid body".

It is worth noting that in the absence of such work skills, it is better to buy a new device.

One of the ways to implement the idea are looking in the video.

Smart sockets and switches, as well as other devices that make up the elements of a smart home, contribute to our lives additional comfort and increase the safety of using various electrical appliances.

They can be installed at work and at home, they are easy to connect and configure, have affordable price and are presented in a wide range.

The main thing is to carefully approach the choice of such devices. It is important to remember that the quality and reliability of their work depends largely on the sustainability of the GSM or Wi-Fi network (depending on the model).

Assigning a smart Wi-Fi socket (or as it is also called smart sockets) is to manage electrical appliances over the Internet, being anywhere. Access to the network This socket gets through a Wi-Fi connection, hence the name. The idea of \u200b\u200bthe invention of unique gadgets with smart connectors, which can be controlled remotely, came to the head of German engineers from the city of Fraugiefer.

Now you can not worry about network devices in the house

Externally, the simplest Wi-Fi socket is quite so pretty, made in modern style, one-time adapter.

Mandatory smart sockets:

• led indicator;
• physical On / Off Button;
• spare power supply, in case of power outage;
• ground.

Additional elements in some, more complex models:

• uSB port;
• motion Sensor;
• thermometer;
• humidity sensor;
• light sensor;
• smoke detector;
• video camera;
• timers, etc.

Also on the market there are options made in the form of a network filter, where connections for connecting electrical appliances can be several, usually up to 4. Connectors, as a rule, are standard and do not require additional adapters.

As a material for the production of smart sockets panels, plastic and glass are actively used.

Using smart sockets, functions

Automated sockets are remarkably suitable for use in private houses, apartments and offices. These small devices become indispensable assistants in organizing comfortable and safe life (or work).

Built-in sensors will be able to prevent you about leakage of gas or another important incident, take care of the preservation of your things and even meet in a literal sense with warmth and incendiary illumination!

It is very convenient to use smart sockets to control heaters and air conditioners, ventilation, air humidification, various pumps, surveillance cameras, lighting, etc.

It also makes sense to connect "dangerous" instruments, such as iron, and not tormented by doubts, you turned off it or not, leaving the house.

With the help of a smart socket, you can operate a music center as an alarm clock, turn off the night light in the nursery, not a little concern, get rid of myself from the need to get in the dark to the bed, turn on the kettle to your arrival, it is easy to use outlets that are in inconvenient places, to ensure timely watering plants without Your presence, in general, find many interesting and useful applications.

The main functions of a smart socket:

• remote control of various household appliances;
• providing security and fire safety;
• electricity savings;
• reboot servers, routers and other office equipment;
• notification of the disconnection of electricity, with the possibility of emergency to de-energize the instruments for preventing the failure of an important and expensive technique.

Principle of operation, management and opportunities

When connecting to the router, each intelligent socket receives a unique IP address that allows you to access it and transmit commands in encrypted form via the Internet (encryption does not allow you to control your electronics to anyone). Naturally, than a stable connection, the easier and correct control will be correct.

Settings can be stored both on the server and on the device itself. In the latter case, there may be a situation when, after losing the network, all the settings have to be installed again. If the server is used to save the settings, then information, including statistics, can be stored for years. Depending on the model, various graphs that are built according to the results of the information recorded by the sensors can be available.

To obtain detailed interface remote control, it is enough to install special software on your smartphone, tablet, laptop or computer. The required software is in free to download and install access. Of course, if you have programming skills and you are not satisfied with the interface of the programs offered, you can write your own hands with your own hands.

The program allows not only to deletely turn on and off the instruments, but also customize timers, that is, set a certain time (Of course, Wi-Fi should also work for work on a schedule). Thanks to this feature, you can significantly save electricity, as well as prevent the risk of dangerous situations.

Timer Features:

• random time to turn on and off (very useful feature To create the effect of the presence of anyone in the house);
• the countdown (turning on and off the electronics after a certain period of time);
• planned specific time (on and off the instruments in a strictly specified time, once, every day, every specific day, etc.).

Some smart sockets can be remotely blocking so that when you press the physical button, it is impossible to turn on, neither turn off the device, while it is necessary to prohibit the work of the schedules and timers. There may also be the ability to set the "I am at home" mode, which allows you to turn off all smart sockets.

In case of disconnection of electricity smart gadget Uses the built-in backup power supply to notice you immediately. The same power source will allow for some time to function the connected security system and fire alarm.

Smart sockets can be combined into the network (the number of sockets can reach 50), assign the main and controlled sockets on the principle hard disks (Master and Slave), in one word, subordinate and automate almost all the technique in the house or office.

Characteristics

As a rule, the overwhelming majority of smart socket models work with an input voltage of 100-240 V (that is, you can use in conventional electrical networks).

The output voltage value is usually fluctuated in the range from 2 to 4 kW, which is enough to connect even rather voracious devices (for example, oil heaters).

Used by the Wi-Fi network standard - 802.11 b / g / n at a frequency of 2.4 Hz.

Safety when used

Note! Before connecting any electrical appliance to a smart socket, you must make sure that its power does not exceed the specified technical documentation to the socket itself.

Is it possible to make a smart outlet with your own hands?

If you wish, the necessary skills, tools and materials, indeed, it is quite possible to build a Wi-Fi-rosette with your own hands.

For the manufacture of the fiscal smart sockets, you will need:

• wi-Fi module;
• solid relay;
• a small power supply (optimally that the voltage stabilizer was 3.3 V);
• external socket (for ease of firmware you can use outdoor socket or a filter with a USB port).

True, if you are not an avid electrician and a programmer, never kept a soldering iron in your hands, it is better not to risk, because if something goes wrong, then you can get a blow to the current, and to burn the apartment. Is it worth it?

It is much quieter to acquire such a useful gadget in the store and without extra effort, risk and unexpected consequences to make your life more comfortable, especially since the prices for smart sockets are quite acceptable, so it is unlikely to be decently saved by collecting the device with your own hands.

If you still firmly decided to construct a smart socket personally, we are determined with the purpose, design and functionality of the homemade gadget, we are preparing the necessary tools, materials and work out.

Not luxury and necessity

Regardless of which you bought a Wi-Fi socket or successfully made it with your own hands, the remote control will probably have to do you like and very soon you can no longer imagine how you can live without such an amazing, useful and convenient invention.