home / Firmware/ IPhone 6 how to turn on the modem. Other causes of failures

IPhone 6 how to turn on the modem. Other causes of failures

For many users of mobile devices, an important function is the so-called "modem mode" (on English language it sounds like Personal Hotspot - "personal hotspot". This is an option that allows the smartphone to share the Internet using Wi-Fi, which in turn is delivered via mobile network telecom operator.

In addition, the ability to create a Wi-Fi network allows you to connect two iPhone devices with each other in order to transfer files (although this can be done in other ways); and also in order to enjoy together games that support multiplayer mode.

In this article we will tell you how to work with this feature on the newest iPhone released - the sixth generation model.

How is tethering activated on iPhone 6?

Let's start with general information- it is very simple to make your smartphone start distributing the Internet. It is enough to go to "Settings", where the corresponding item will be available. It is called "Modem Mode". On as, however, on other Apple technology, running on the basis of iOS 8, this option is activated with one click.

After that, if you go to the options tab, you can see which will indicate the method of connecting to your network. We will tell you how to fill them in a little further.

IOS 8 problem

Many users who have performed a firmware update on their device running on operating system 8th generation, there may be a problem - no one knows where the modem mode disappeared. On the iPhone 6, this happens too - and often a person who needs to create a network with the distribution of the Internet does not know what he needs to do to activate his modem. Someone might suggest that it is system failure... At the very least, the reviews of iPhone users on the forums indicate a misunderstanding of people where the option went missing.

Indeed, from the outside it may look like a problem - the menu item that was previously available and responsible for working as a modem disappears from the settings. But we assure you there is nothing to worry about. For information on how to enable tethering on iPhone 6, we'll tell you in this article.

Solution

So, after updating the firmware, the item really disappears from the settings - this is a fact. This happens for the reason that the configuration gets lost mobile point access to your operator's network. Information on this can be found in the same place - in "Settings", in the section " cellular". After that, to set up the modem mode on the iPhone 6, you need to go to the section " Cellular network data transfer ”, where you can see exactly what the problem was.

Below there is a window called "Modem mode". It has columns APN, "Username" and "Password". Remember: you filled in the same information in order to connect to the Internet in another settings window. That is, the developers of iOS 8 have simply separated the Internet configuration for the phone as a whole and for the modem mode. This was done, obviously, in order to prevent unauthorized traffic write-off.

Here is the answer to the question: "Where is the modem mode on the iPhone 6?" It did not disappear anywhere - just the settings after the update need to be re-filled.

Data to fill

In order for the readers who use the services of this or that operator to know what information needs to be entered to start working with the modem mode, we publish a general summary of data on the most popular operators.

If you have MTS - in APN we indicate internet.mts.ru, in the other two fields - mts.
If Megafon - in APN - internet, and in the fields "username" and "password" - gdata.
For those who have Beeline, you need to write to APN - internet.beeline.ru, in other fields - beeline.
Finally, for Tele2 in APN we write internet.tele2.ru, while leaving other fields blank.

If you fill in everything correctly, the tethering mode on the iPhone 6 you are using will appear immediately. Thus, you can distribute mobile Internet to your friends who are nearby.

Wi-Fi settings

Do not forget to also configure the Wi-Fi network that your device will create. The main thing for us remains the name of the network and the access key to it (password). By default, the name sounds like "Your name" (which was specified when the phone was first started) with the iPhone. On it, those who will connect to the network will see that you are distributing it.

The second option to be filled out is the network key. In other words, this is the password that those who want to connect to you will have to enter. Required condition- at least 8 characters.

Data transfer

Since in the instructions on how to enable tethering on iPhone 6, we explain how to let other users use your Internet, we would also like to add a warning - some telecom operators disable the ability to distribute the Internet on unlimited plans. This is done in order to prevent excessive load on the network. True, this does not apply to the largest players in the communications market, such as MTS, Beeline, Megafon.

There is another important point- keep track of what exactly those to whom you distribute the Internet are doing on the Internet. If, say, you have several megabytes left on your account and you have entered modem mode, and your friend is watching videos, most likely these megabytes will soon run out, after which the traffic will be charged according to a completely different principle. Therefore, you run the risk of not only spending extra money if you do not control the traffic consumption in your network in time.

Choosing a tariff plan

Finally, if you have a constant need to create a Wi-Fi network using your phone, you may need to take care of a suitable data plan. In order to support the operation of several devices on the Internet, obviously, you need a tariff with a large amount of Internet traffic, or better, even with "unlimited". Fortunately, today operators allow you to choose a tariff plan depending on what services you would like to connect. And many providers even have separate traffic packages, you can order them "on top" of those services that you receive in the first place (minutes and SMS).

In the article, we answered whether there is a modem mode on the iPhone 6. It should be emphasized that this instruction is also relevant for other Apple devices running on iOS 8. In particular, the iPad of any generation has a similar difficulty with the fact that the mode settings are constantly lost after the update modem. There is nothing wrong with that, you already know how to act to distribute the Internet again.

Dear friends, today we will discuss with you a problem that often arises among users of iOS devices - what to do if the modem mode on the iPhone has disappeared? It is very easy to fix it, you will soon see it for yourself. But first, it will be useful to learn more about this function: what it is for, which models can use it, and so on. And also the reason for the appearance of this problem will take part in the introduction. Then we'll show you how to fix the problem anyway. Almost at the end, there will be a small series of recommendations for using the tethering mode on the iPhone. Go!

So, the modem mode on the iPhone is a built-in function that allows you to distribute the Internet available for the SIM card installed in the phone to other devices. For example, you can create a hotspot from your iOS smartphone and view your mail through your laptop. However, there are some requirements for the latest devices. If you go to the access point menu on the iPhone, you will see that the system offers three options for connecting other devices to the network:

via Wi-Fi, when the device connects to the smartphone via wireless network Wi-Fi;
Bluetooth, when the device is connected through such a connection;
USB - the smartphone is connected to the computer via the USB port.

As you can see, there are many connection options, so each user can find the most convenient one for himself. However, if the iPhone 6 does not have a tethering mode, for example, then you will not see any of these menu items. What are the reasons for this behavior of the device?

It happens that the error appears after updating software... That is, if you had iOS version nine, then you updated it to the tenth version, then it is likely that the upgrade was the reason. But this does not mean that there is no need to update the device.
Changing your mobile operator can also be the root of your problems. If before that you used the services of Beeline, then in the phone settings there are all the parameters of this operator. And then you suddenly switched to Megafon: the settings remained old, then it may be that the modem mode on the iPhone 7 or any other model has disappeared. Although these parameters usually change automatically, no one is immune from technical failures.
It happens that the user himself does a reset of the communication settings or a complete reset of the device. Then, too, all data on the previous parameters are deleted.

Lost modem mode on iPhone

So, if there is no tethering mode on the iPhone, then it needs to be returned. Based on the above reasons, you can understand that it is quite easy to return information about the operator settings. But how exactly? Now let's sort everything out in order:

Megaphone

Username: gdata
Password: gdata

MTS

APN: internet.mts.ru
Username: mts
Password: mts

Beeline

APN: internet.beeline.ru
Username: beeline
Password: beeline

Tele2

APN: internet.tele2.ru
Username: leave blank
Password: leave blank
Keep track of the traffic that is used for the distribution of the Internet. More data is loaded on the computer, which means more megabytes will be spent on traffic. Users, whose traffic is very limited in volume, must be especially careful.
Some tariff plans block the distribution of the Internet. This applies to people with unlimited traffic. However, they also have the opportunity to use the modem mode, but for an additional fee. Contact your service provider for details.
Using a smartphone as a hotspot drains the battery pretty quickly, since, in addition to cellular data, both Wi-Fi and Bluetooth work. But when connected via USB, you can charge your phone at the same time.

Conclusion
Dear readers, finally, we managed to fix the situation with the modem mode on the iPhone together. We learned not only how to solve such a problem, but also the reasons for its occurrence. And also some recommendations were considered for using a smartphone as an access point to global network... We hope you got it right the first time and there are no questions left! Tell us about your experience, opinion and impression in the comments.

The iPhone is a versatile device that has a number of advantages, one of which is its ability to act as a modem. Using this phone versions 4s, 5s, 6 and so on, any subscriber can distribute traffic within the network's range. This can be done using a special mode, which you just need to activate and make small settings to provide the Internet for any device, from smartphones to PCs. But not every owner of such a mobile device knows how to properly enable the modem mode on the iPhone 6, and this can be done very easily.

No modem mode

Sometimes it happens that after installation on iPhone 6, 5s, 4s, as well as its other versions, scheduled updates stop working or various network settings are completely removed. The modem mode stops functioning, or the system constantly freezes on the window of the running processor. This situation is repeated periodically and no user is protected from it.

Removing the modem mode is found not only in iPhones 5s and 4s, but also in 6, since the ninth version of iOS also failed to cope with the problem in question. Updating the phone leads to the fact that the corresponding item from the menu simply disappears, or when you turn it on mobile device completely freezes in a running state.

In fact, the dial-up service does not disappear, nor is it deleted. In fact, it looks like Apple simply disabled this feature by default, explaining its action by the fact that subscribers practically do not use this mode. But these are not all reasons. The shutdown of the function in question was carried out so as not to be responsible for its operation, taking into account the peculiarities of the Internet settings, operators of different states of the whole planet.

In fact, a large number of users are accustomed to using the iPhone 4s, 5s, 6 and other versions as an access point, the removal of which makes them almost helpless. For example, while traveling, it is much more convenient to work on a PC, getting the Internet from your phone, without using other complicated and inconvenient routers. That is why it is necessary to find an answer to the question of how you can restore the ability to distribute Internet traffic using the iPhone.

Activating modem mode

In the case when on iPhone 6, 5s, 4s, or other versions this smartphone, namely in iOS 9, the connection in modem mode stops functioning, the subscriber should first turn it on, and then manually write the data of his operator.

To successfully carry out these actions, you must do everything clearly and correctly, observing the following sequence:

You need to find the cellular department in the settings.
Then find the line called "Modem mode" and change its state to on.
After activating the modem mode, the subscriber should enter the settings of the operator being used by filling in the appropriate fields, as well as the tabs for cellular data.

The information that needs to be entered changes accordingly with the operator, so you need to be careful. Data for introduction:

After filling in the settings of the cellular operator in the iPhone 5s, 4s and its other versions, the "Modem Mode" service becomes available for operation. To know required settings modem from other operators mobile communications you can contact them directly by calling the hotline number.

IPhones are versatile devices. They allow not only making calls and surfing the Internet, but they can also act as a modem themselves. With their help, you can distribute traffic to selected subscribers, within the range of the network (or the length of the USB cable). For this it is provided special treatment, it is enough to activate and configure it to provide any device with the Internet: from smartphones or “smart” watches to a computer.

No modem mode?

Often after installing regular updates on the iPhone, without apparent reasons Some network settings... So the modem mode stops working, or the system hangs endlessly on the window running process... But the problem is not new, each time the situation repeats itself with a different frequency and no one is immune from it.

The next one, the ninth version of iOS, did not avoid similar problems. After the update, the users simply lost the corresponding item in the menu, or when they tried to turn it on, the smartphone froze for a long time in the launch state.

But in fact, the modem distribution function itself has not gone anywhere. It turned out that Apple simply disabled this mode by default - they say, it is still rarely used by anyone. And of course, this was partly done to avoid responsibility for its work, given the peculiarities of the operators' Internet settings. different countries the world. After all, explaining this to users every time requires a lot of time from the technical support service. And so iPhone owner, at its own peril and risk, opens access to it for third parties, and therefore there are no claims to the manufacturer.

However, in reality, many users are accustomed to using the iPhone as an access point, and now they feel like no hands. For example, on the road, it is much more convenient to work on a laptop, receiving traffic from a smartphone "over the air" or through a cable, without additional router... So let's figure out how to return the ability to distribute the Internet through your iPhone.

How to activate?

If the connection in modem mode does not work in iOS 9, you will need to first turn it on and then manually register the data of your operator.

So, for this we find the section of cellular communication in the settings, scroll down to the item - Modem mode, and put the opposite - "enable".

Done, modem mode is activated. Now you need to enter the settings of your operator in the tabs of cellular data provided for this. The example below shows the network settings of Megaphone.

We also offer appropriate settings for the most popular domestic telecom operators.

- If you are connected to Beeline , in the first paragraph - APN, we prescribe: internet.beeline.ru, in the second - Username, we put: beeline, in the third - the password, again - beeline.

- At Tele2 everything is much simpler: in the APN line, enter: internet.tele2.ru, and the username and password items just need to be left blank.

- In the settings for Yota also, only the line with APN is filled in, where -internet.yota is indicated, the other two remain blank.

- For MTS everything looks like this: in the first paragraph we put - internet.mts.ru, in the other two - mts.

- Users Motivtelecom enter: in APN - inet.ycc.ru, as login and password - motiv.

After entering into iPhone settings cellular operator, the "Modem mode" function becomes available. If your operator is not listed above, you can contact him directly to get the modem settings.

Pay attention to an important point - when the modem mode is running, the iPhone will automatically distribute the Internet to the computer, whenever it is connected with a USB cable. Even if it's just another sync to create backups via iTunes. Therefore, in order to avoid excessive spending for mobile traffic- do not forget to disable this option if it is not used.

Do you still have problems?

Try the following:

We recommend that after entering the data, immediately restart the device by pressing the power key and sliding "down". So all the changes to the settings will take effect, and you can turn it on without any problems. iPhone mode modem.
You should also make sure that the version of iOS 9 installed on the iPhone is up-to-date, since in the first two releases there were various kinds of network failures. After the update, the problem may be resolved by itself, or you will have to repeat the procedure for making the modem settings again.
Oddly enough, it does not hurt to check the connection to the network of the donor iPhone itself. No one ruled out any technical failures with the operator, just follow any link to make sure that there is a connection.
If obvious reasons for the problems, such as a disabled modem mode, an outdated version of iOS and the lack of settings were excluded, and the iPhone still refuses to distribute the Internet, you can try resetting the network settings and try to re-establish the connection. This is usually the most effective remedy to deal with any malfunctions.

To perform a selective reset, go to the "Basic" section of the settings. Scroll to the reset point and click on the offer to reset the network settings in it.
This operation requires re-confirmation by entering the lock password (if one has been set). After your consent, all saved network parameters will be erased, including passwords and Wi-Fi settings... In the process of erasing on iPhone screen the company logo and status bar will appear. All other content on the smartphone will remain in place.

Once the process is complete, the iPhone should automatically reboot. If it doesn't, be sure to reboot it yourself. After that, manually re-enter the modem settings described at the beginning of the article.

One more Alternative option selective reset - via the cellular menu.

Again we find the point of the cellular data transmission network in it, and select the tab for resetting the settings in it.

Again, we remind you of the need to reboot at the end of the reset process for iOS to take effect the changes made.

In both cases, the reset will reset all saved network settings to zero, no other user data will be affected. You just have to re-enter the necessary information or request from cellular service providers automatic settings if they have any.

Also, after updating the shell, many encountered problems in Wi-Fi operation module. You re-register the network settings, enter the correct password, pair with third party devices but the system refuses to accept them. It is clear that without a connection between the two devices, the iPhone will not be able to distribute anything.

In such situations, the operation of "forgetting" the selected network helps.

Find the desired Wi-Fi network in the settings, select "forget". Then start the search and re-enter the connection settings.
If you are worried about the safety of information during resets, because sometimes something goes wrong, we recommend that you always make fresh backup... With its help, it will be possible to restore the gadget from any state (except for physical damage).

Other causes of failures

The described tips did not help and desired function still not working? Below is a list of other possible problems and methods of dealing with them.

It happens that previously successful distributions suddenly stop working. In such situations, repeated switching on / off of the service helps.
During incoming calls, the access point may be temporarily blocked. Usually, after the end of the conversation, it is activated automatically, but in rare cases you have to do it manually.
In addition, some cellular operators limit the number of devices connected via Wi-Fi at the same time, so we recommend connecting no more than three devices in one session.
Sometimes the inability to distribute is caused by the fact that the recipient device simply does not support receiving high-speed networks. Ideally, it should recognize the 802.11g / n standard, with WPA2 encryption.
And another one possible reason why the modem mode does not work is that the operator simply does not support this service in your chosen tariff plan.
The access point may not open also due to the unstable connection of the iPhone to the network. Permanent breaks block the execution of a running operation. In this case, rebooting and arriving in an area with stable coverage helps.

As you can see, in the overwhelming majority of cases, the cause of modem communication malfunctions is not so much the iPhone itself or its system, but rather the peculiarities of the operator's work and settings. Therefore, you must first of all contact the provider. mobile services... And all hardware problems of the smartphone are eliminated by rebooting, resetting, or updating the firmware to the current version.

How many times it happens that there is a computer, you need to connect to the Internet from your PC, but there is no way to enter through Wi-Fi. What then is to be done? Is it possible and how to share Wi-fi from an iPhone?

Apple iPhone 6 can be used not only as a phone, but at the same time as a modem, while distributing the Internet within the range of your network.

This process can be ensured fairly quickly by following a series of simple steps. The modem mode can also be distributed to iPhone 6 by Apple smartphones for iPhones 4s, 5s, 6, 6 plus and 7. You can also distribute the Internet to other Apple devices and to any phones, as well as tablets and computers. In turn, other devices such as the iPad, phones on the Android OS, tablets and computers are also capable of distributing the Internet as a modem.

Having a SIM card for accessing the Internet at high speed from network operators such as MTS, Tele 2, Yota or Beeline, or others mobile operators, you can use your iPhone to activate the Wi-Fi hotspot. Of course, it's good if you have unlimited Internet, otherwise the traffic will quickly be used up, and all the money on your phone account will be spent.

You just need to know how to turn on the modem mode on the iPhone 6. You can connect the iPhone as a modem when you need to help friends, if they run out of traffic on the phone or connect your laptop to the Internet while on the road. The good news is that setting up an Internet access point will take just a couple of minutes, unlike stationary routers and removable modems.

You can distribute the Internet from an iPhone to any device in different ways: through the wireless WI-FI, using the Bluetooth function, via USB cable to your tablet device or PC. Of course, definitely through wireless mode Wi-Fi is more convenient and faster to transfer.

Consider the option of how to distribute the Internet with using WI-FI... In order to resolve the issue of how to set up and connect the modem mode, how to distribute wifi from the iPhone 6, read the following connection procedure. Open the main menu of your smartphone screen and enter the "Settings" of the phone, then - in the "Cellular" section and select the "Cellular data network" function. Then connect the "Modem mode", having previously entered the secret password. It is necessary to indicate a possible point of your access for the connection network when the password has not been entered before, otherwise the connection will occur automatically.

The name and the connected hotspot from your smartphone will appear on the receiving devices. That is, a so-called virtual modem will appear in the connected device, through which it will be possible to launch an additional PC or other device to the access point on the iPhone. In this case, you need to use the Wi-Fi password, where it is visible in the settings.

If your friends want to connect their smartphones to your iPhone 6 in order to receive Internet distribution from the iphone in Wi-Fi mode, and your distributing iPhone 6 is already configured for a modem, they can configure a Wi-Fi hotspot in their smartphones, while it is necessary enter the secret access password you have made, and confirm the activation.

When other devices are connected to the smartphone, you will read a message about this on the status bar. By the way, pay attention to the fact that the mode of the connected Wi-Fi modem is not displayed on the screen. Therefore, the battery in the distributing smartphone can be discharged very quickly.

Be aware that you can distribute high-speed Internet from one source and to several devices at once: iPhone, laptop, iPad and up to 5 devices at the same time!

The number of receiving instruments connected to the network will certainly affect the speed of battery discharge. The more there are, the faster the discharging iPhone will be discharged.

If you need to change your password Wi-Fi networks, go to "Settings" again, go to "Modem Mode" and set New Password for wifi.

In this case, the selected code wifi password, must contain at least eight ASCII characters. Other characters will not work, since other devices will not be able to connect to your access point in this modem mode. The characters that will not work are characters from languages from Japanese, Chinese, or Russian. ASCII characters are:

Upper and lower case letters of the English alphabet;
Arabic numerals from 0 to 9;
other punctuation marks.

Be aware that with the next update of the phone's firmware, the cellular data settings may be reset, so "Modem mode" will again drop out of the menu settings.

Is it possible to do something if you were distributing the Internet and suddenly the modem mode on the iphone began to disappear, turning off everything additional smartphones from the network?

And sometimes, on the contrary, you have updated the iPhone program to iOS version 8.1 or 9 and the modem settings failed on the distributing iPhone, while the device reports that the modem mode is not available.

Sometimes the modem mode just disappeared and does not work, but it happens that the download does not occur and the modem constantly freezes when connected persistently.

Don't assume that the dial-up service is gone or gone. When connecting, it happens as if the six simply turned off the modem function by default, deciding that the owner of the device does not use this service. Actually this function stopped turning on in order to avoid the company's responsibility for the operation of the modem connection service, taking into account the specifics of the settings various internet companies, as well as operators from different countries.

Most users, without hesitation, connect their iPhone 6 as a modem constantly to different devices, therefore, blocking this function causes indignation of users due to the inability to solve current tasks. This problem can also be resolved by restarting the modem.

Deleting modem mode

A missing modem can be restored by applying the tethering deactivation process in iPhone 6 or iPhone 6S - quite possible if installed iOS program 9. In this case, the subscriber must first turn on the modem mode, then manually enter the parameters of his direct operator, for example, the Beeline operator must be written - Beeline, Tele2. In this case, the order of entering the settings must be performed clearly in a certain sequence.

If, nevertheless, when connecting to your network, a message appears on the screen: "Unable to connect to the network", you need to eliminate the body of the problem that prevents the connection. To do this, take the following steps in stages.