Menu
Is free
registration
home  /  Navigators/ How to connect a network scanner in windows 10. How to configure a scanner over a local network? Kyocera network scan setup

How to connect a network scanner in windows 10. How to configure a scanner over a local network? Kyocera network scan setup

Published: 11.02.2018

You will need

The local network; - scanner; - the Internet.

Instructions

Use RemoteScan 5 to share your scanner over the network. Download this program at the link http://www.cwer.ru/node/6585/. Next, install it on computers. Accordingly, to the computer to which the scanner is connected, the server version, to the rest of the PCs to which the scanner must be connected via the network, the client version.

Please note that when installing the client version of the program, a message about the absence of a scanner may appear, do not pay attention to it. After the installation of the server part of the application is completed, right-click on the program icon in the system tray. To access the settings.

Select the scanner, configure the ports to access it. Note that it may take one to three minutes to identify the device. If not, then your scanner model is not supported by the application.

Wait for the strikethrough icon to disappear from the icon. Open your antivirus / firewall. Allow access to the scanner port, by default it is 6077. If you have NOD32 antivirus, then go to the personal firewall, open the settings, select the interactive mode, create a separate rule for the RemoteScan program. Install client applications on required computers, add a special software and scan over the network.

Use another program to share the scanner over the network if previous application your scanner has not been detected. To do this, download the Blindscanner software. Go to the link http://www.masterslabs.com/ru/blindscanner/download.html, select the version you want, download and install on computers the server and client versions of the programs, respectively. The setting is done in the same way.

Configure a scanner over a local network

Many users have come across a situation where the office has several computers and one printer (scanner or MFP). Most often, one or two MFPs with connected software local network A PC is sufficient for performing office tasks. However, configuring the scanner over a network can be tricky. This is due to the fact that Windows has a built-in print server, but there is no such scanning server. That is why we offer you instructions on how to set up scanning documents over a local network.

Read also:

We will organize the scan server using the RemoteScan program. To do this, follow these steps:

Download Remote Scan for Windows (7/8/10)

Version: 5.494.

Download

Run the downloaded file, select the installation language and click the "Next" button. Follow the prompts of the Installer and click "Next". We agree with the license, and in the options window put a check mark “Install Server Software”. The instance of the program will be installed in server mode, allowing other PCs to use the network scanner. At the next stage, you need to make sure that the checkbox is checked, as in the screenshot.

IMPORTANT! The firewall may prompt for permissions for the program. In this case, it is recommended to allow the program on all networks.

Server version launch

You just need to select a scanning device for RemoteScan to share it. Double click on the required device.

The program will be minimized to the tray and in the future it will start itself when you turn on the computer.

If it becomes necessary to reconfigure the scanning device, you can always do this by right-clicking on the RemoteScan program icon and selecting the "Chose a Scanner" item.

As you can see, using the program is pretty simple.

How to make a network scanner?

The master's answer:

A local network that unites several computers within one organization has some advantages in use: accessibility to common applications and files and the ability to share equipment: scanners, printers.

To make the scanner networked, you can use the RemoteScan 5 application. To do this, download this program from the address: http://www.cwer.ru/node/6585/, then install it on each computer in the network. Accordingly, on the PC to which the scanner is connected - the server version, and on other personal computers to which the scanner must be connected via the network - the client version.

Please note that during the installation of the client version of the program, a message may appear stating that the scanner is missing. Don't pay attention to it. Upon completion of the installation of the server part of the program, you need to right-click on the program icon in the tray in order to be able to use the settings.

Then you can select the scanner and configure the ports to connect to it. Keep in mind that it can take up to three minutes to identify any device. If this did not happen, then this model scanner is not supported by the application.

Wait until the icon is no longer crossed out. After that, open the antivirus program / firewall and allow access to the scanner port. The default is 6077. If you have NOD32 antivirus installed, you can go to your personal firewall, open the settings, select the interactive mode and start creating a separate rule for the RemoteScan program. It is necessary to install the client version of the application on the corresponding computers, add special software and perform a network scan.

Perhaps using another program to share the scanner on the local network will help if the previous application did not detect your scanner. To do this, you need to download the Blindscanner program, go to the address http://www.masterslabs.com/ru/blindscanner/download.html, select the required version, download and install the server and client versions of the program on computers, respectively. Perform the setting in the same way.

Canon 1133 (a) - print and scan over LAN and WiFi, setup

This article will describe how to set up Canon 1133 and 1133A MFPs for printing and scanning over a LAN.

Canon 1133 MFP is an interesting office class device. Large cartridge (up to 6,000 pages), 2-sided printing. The 1133A has duplex scanning. Large paper tray. Two network interfaces - wired (Ethernet) and wireless (WiFi).

The 1133A model is distinguished by the addition of an auto-feeder to the scanner and the ability to double-sided scanning.

Since this is an MFP for the office, accordingly, the most correct way to use it is a direct connection to the local network.

Connecting Canon 1133 (1133A) to a local network

The beginning of the setup is to connect the MFP to the local network. This is done through the settings menu on the MFP itself. To connect via WiFi, you need to specify the access point and password to it. For a wired connection, you need to specify automatic receipt network settings via DHCP, but if you do not have a router on your network (DHCP server), then you need to manually specify the IP address of the MFP. If you are using a wired connection, connect the cable to the MFP and to the router.

After saving the settings, you need to turn off and then turn on the MFP. Use the MFP menu to check if the device has received an IP address. The MFP panel has quick button access to information about the state of the device.

Configuring the router

If a router is used on the local network, then you need to open the router's admin panel and check the connection of the MFP to the local network there - it should be in the list of network clients that received an IP address.

It is necessary to assign this address to the MFP on a permanent basis! So that the router assigns this IP address to the MFP every time it is turned on.

How to connect a printer scanner to a computer

Up to this point, connecting a printer or scanner to a computer has been a tricky business.

It was necessary to find a special port, make sure correct setting of all system drivers, and hope that everything is installed correctly and your OS (Operating System) will give you the opportunity to scan or print the coveted document. Thanks to this instruction, everything has become much easier. If your goal is to print documents, connect a printer or scanner to a computer, you need to configure remote access(print documents using the Internet), and you ask yourself the question "How to connect a printer, scanner to a computer" - this instruction is for you!

Connecting the Printer to a Personal Computer

Stage 1. Placement of the printer near the PC (Personal computer).

Make sure the printer or scanner is within easy reach of the cable or port. In other words, the cable should not be stretched, it lies freely.

Advice: Carefully roll up excess cable and tie it with a rope, this will help you to stumble less on the cable and increase its durability.

Stage 2... Software.

To facilitate the process of connecting the device to a PC, install the necessary software (software, drivers) supplied with the printer by the scanner.

Advice: If you did not have a disc with the software, do not worry, the Windows system itself is capable of automatic mode identify the printer scanner that is connected to the PC. Also, if all this did not happen, you can go to the printer manufacturer's website and download the driver you need with your own hands, as a rule, it is located in the "Software and Drivers" section (Almost all modern sites are able to detect your printer by the scanner automatically).

Stage 3... Connecting a printer to a scanner.

One of the next steps in solving the question "How to connect a printer scanner to a computer" is a direct connection to the USB connector.

Advice: on this stage make sure your printer / scanner is plugged into a power outlet and connected to your computer.

Stage 4... Follow the instructions of your operating system.

At this stage of connecting the scanner printer to the PC, your operating system will do all the work for you, just click next. At this stage, the complete and final installation of the drivers takes place.

Advice: if the system before or after this stage still does not see your printer scanner: try connecting your cable to another USB connector, or completely remove the drivers and return to stage 2.

Stage 5... Check if your printer or scanner was installed correctly and correctly.

Open the Start menu, click on "Control Panel". Further "Devices and Printers (View devices and printers)". Find the printer you want in the list of connected devices.

Ready! After these manipulations, your printer scanner is connected and fully functional.

Scanners

Using a scanner, you can translate text, drawing or image into digital format for further processing, for example, to preserve old photographs printed on paper for many years. For home, flatbed scanners are usually chosen. They are compact and easily scan thick media. For offices, broaching scanners are often preferred, which can process only paper sheets, but at high speed and in streaming mode. Xerox manufactures scanners of various types for home and office, having different dimensions, speed and scanning modes, resolution, color rendering, maximum page load per day and other parameters.

Find the right Xerox scanner for you with user-friendly interface, a wide range of functions, high reliability and an excellent price-performance ratio. Confirm your decision by reading numerous reviews and reviews of Xerox technology.

In the catalog on this page you can familiarize yourself with our model range scanners, go to specific product pages to evaluate specifications, read descriptions, view photos, compare several models with each other and choose the right device for you. You can buy a Xerox scanner from our partners in Moscow, St. Petersburg, Novosibirsk, Yekaterinburg and many other cities in all regions of Russia. To find out the addresses of stores in your region, click on the "Where to buy" button under the product image, and on the page that opens, select the city, republic, region or region you are interested in. In addition, you can find out where to buy Xerox scanners by using the following


  • Fast multithreaded open TCP port scanner!
  • Scan the network and find devices.
  • Determine the IP and MAC addresses.
  • Remote turn on, turn off and restart the PC.
  • Receiving information from a PC over the network by the administrator.

This free program allows scan the local network, detect active hosts, computers, servers and other devices, determine their MAC and IP addresses. The utility has a built-in multithreaded scanner of IP addresses and TCP ports on the network so search network devices will not take long.

How can I find out what IP address a device connected to the network received? It can be a tablet or TV in your home wifi network, or maybe corporate network with hundreds various devices... In any case, this tool will allow you to scan the network, detect devices and display their addresses (IP, MAC, DNS, WINS).

It supports scanning one or more ranges of IP addresses and many protocols for discovering network devices (ICMP ping, search for open TCP ports, NetBios, SNMP, UPnP, ...). After completing the process of searching for hosts on the network, you will have the opportunity to export the list of detected device addresses to a file or copy to the clipboard.

Download our free port scanner software now and use it whenever the need arises!

Supported OS Windows XP / Vista / 7 / 8.1 / 10; Server 2003/2008/2012/2016/2019.

What else can our address scanner do?

  • Getting various information from the found Windows computers over the network: information about the system, list of installed software, contents of the registry (), list of processes and services, open resources, user accounts and groups, event log, etc. (if you have administrator rights on the remote computer);
  • Receiving various information from switches and printers via SNMP, UPnP, NetBios ();
  • Determination and display of MAC-addresses of devices;
  • Search for open TCP ports on a remote host ();
  • Ping hosts;
  • Route tracing;
  • Turning computers on and off over the network ().

For some multifunctional devices, manufacturers provide software, thanks to which you can click on the "Scan" button, the document goes to a specific folder or network resource, and then the employee can easily get this document... But not all devices have such functions, therefore, in this video, we will consider a program that allows you to perform remote scanning, i.e. over the network. Does not require physical presence at the computer to which the scanner is connected or multifunction device so as not to interfere with the working employee.

And we will use the TWAIN Web program, which can be downloaded from the official website of the developers http://unit6.ru/twain-web. The main advantages of this program are that it is completely free and easy to use, as it requires the installation of only the server part on the computer to which the scanning device is connected.

As for the requirements, the scan server must be running Windows XP or later, as well as .NET Framework 2 or higher, and the client only needs a browser and access to the scan server.

Download the program and run the installer ( Advanced settings \ Leave the path the same \ Specify the port). By default, port 80 is indicated, but I do not recommend specifying it, since this port may already be occupied by Skype or a web server. If you know for sure that neither the web server nor Skype will be installed on this machine, then you can leave the default port 80. I will indicate 81.

The web page for scanning is loaded. What we should pay attention to is the address http://127.0.0.1:81/ [email protected] Actually, we will knock on the address of this page from other computers in order to scan. More precisely, correcting the IP address of the computer on which the program is running. Here we have the address 127.0.0.1, this is the address of the local machine, that is, now we are logged into ourselves.

We also need to create a rule in the Windows firewall, or in a third-party firewall if you are not using the standard Windows firewall. (Start \ Control Panel \ Windows firewall\ Advanced settings \ Inbound rules \ Create rule \ For program or port \ TCP 81 \ Allow connection \ For all profiles)

Now let's try to scan a document from a client computer, for this in address bar introduce http://192.168.0.4:81/ [email protected] (192.168.0.4 is the IP address of the scan server). The web interface was displayed, which means that the service is running on the server and the firewall let us through.

Scan parameters:

- scanner selection- there are usually 2 devices, this is the TWAIN driver supplied by the hardware manufacturer and the WIA driver. Personally, I was able to scan only through WIA, that's why we choose it. When switching, you can see what resolution range is supported, as you can see, the TWAIN driver gives out some unrealistic numbers, and WIA looks like the truth;

- name and number;

- DPI resolution- usually 150 is enough, so that the file is not large and everything can be seen;

- color, output file type and paper size.

If you want to scan several documents in a row, then there is the item "Batch scan". Here you should specify the number of scanned documents and the delay between scans, i.e. the time it takes to replace a sheet on the scanner in seconds. This delay is also performed during the first scan, so that you have time to reach the scanner and put the document there.

But there are subtleties here, you can specify the scanning of documents with saving in separate jpeg file NS. But, in internet explorer, every time a request will be executed, save the file or open it, therefore, you still have to go to the computer every time to select an action. In this situation, you can save documents in pdf file, then only when all documents have been scanned will you be prompted to save the document.

If you need to scan each sheet into a separate jpeg file, then you can use the browser Google chrome, in it documents are automatically saved in the specified folder, without prompting. Anyway, in Chrome everything works more adequately, as you saw in Internet Explorer, the file name and numbering did not work, but everything is fine here. It is also worth considering that the file numbering will continue from the last scan, even when you have not scanned for a week.

Now, we can simply create a shortcut on the user's desktop to this page, and if you have a network with a domain, using group policy you can spread this shortcut to all computers in a matter of minutes!

Thus, you can scan even from devices such as phones and tablets, the only condition is that they are on the same network, and then all the same through the browser.

If over time you need to change the port on which the server part program, then it can be changed at any time ( Start \ Programs \ [email protected]\ Configuration)

It is also desirable to specify an automatic restart of the scanning service, in case of failures (Start \ Control Panel \ Administrative Tools \ Services \ [email protected]\ Startup type: automatic \ Recovery: for all failures - service restart)

And if you have any question or suggestion, please contact the developers, they welcome such initiatives!

The local network provides various advantages for working with data: copying, transferring information, sharing programs and technology. For example, one device can work with several computers on the network.

You will need

  • - a computer;
  • - configured local network;
  • - scanner.

Instructions

1. Download RemoteScan 5 to share the scanner over the network in Windows. You can download it here http://www.remote-scan.com/. Install the server version of the program on the computer to which the scanner is connected. Install the client version of the application on other computers in the network. When installing latest version the program will give a message that the scanner was not found, do not worry, this is typical. After installing the server version, the program icon will appear in the tray. Click on it with the right mouse button, go to "Settings" in order to connect the scanner to the network. Select your scanner and configure the ports. The scanner may not immediately detect it, it will take from one to 3 minutes.

2. Open your firewall / antivirus and allow access to port 6077, if you have NOD 32 antivirus, go to your personal firewall, go to the interactive mode in the settings and make a separate rule for the RemoteScan program. Later, install the client versions on other computers. The installation of the network scanner in Windows is now complete.

3. Set up a network scanner in Ubuntu OS. Go to the terminal, enter the command # apt-get install and enter the name of the required package - sane-utils, then open the scanner configuration file, the one that can be located in the /etc/sane.d/ folder with the name saned.conf, add to the end file the address of the computer to which you want to share the scanner. Edit the #nano /etc/inetd.conf file, add the line sane-port stream tcp nowait saned: saned there and specify the further path / usr / sbin / saned saned.

4. Make a group Scanner: #groupadd scanner. Add users to this group with the following command: # #usermod -aG scanner "Username"; usermod -aG scanner saned. Edit the file 40-libsane.rules located in the nano /lib/udev/rules.d/ folder and find your scanner there. Change the line with the scanner name to something like this: # "Scanner name"; ATTRS (idVendor) == ”03f0 ″, ATTRS (idProduct) ==” 4305 ″, ENV (libsane_matched) = ”yes”, MODE = ”664 ″,“ Group name ”=” scanner ”.

5. Configure the client computer: install the sane-utils package with support standard program install packages apt-get install, edit the net.conf file located in the nano /etc/sane.d/ folder, add the address of the computer with the scanner to the end of this file. The network connection of the scanner is complete.

In contrast to Windows, which is easy to install and configure, Linux has become a symbol of the complexity and complexity of installation, which can scare off anyone who does not consider himself a virtuoso. command line and a high-class programmer who can write a missing driver for an unknown device on his own.

However, installing and configuring ubuntu - especially the Linux distribution that newbies are famous for - is no more difficult than any other operating system. This distribution kit is ready for launch immediately after the installation and includes everything you need to work: the customer for communication via the ICQ protocol, the customer Email, photo tool, audio and video player, office suite OpenOffice. In addition, it implements a mechanism for tracking software changes, relieving the user from the need to monitor the release of new versions. Here is a schematic instruction for the installation process: 1. Download the distribution kit from http://ubuntu.ru/get, burn the disk image to CD, install it into the drive and boot. To do this, it may be necessary to set the priority for booting from the CD drive in bios. 2. In the launched installer, select the Russian language. It is allowed to navigate the list of languages ​​with the support of arrows on the keyboard. 3. In the menu that appears, choose the "Install ubuntu" item 4. You will need to again choose the language for communication during the installation process, specify the time zone. 5. Select a keyboard layout and test if it works correctly by typing a few words. 6. An especially critical stage of the installation is the definition of disk partitions for the operating system. If you want to leave Windows and configure Ubuntu as an alternative operating system, you need to do it very neatly so as not to lose expensive data and keep Windows working. As usual, for the root partition containing system files, 5 GB is enough, for a swap partition is usually enough space equal to the volume random access memory computer, or one and a half times larger than it. The home directory, home, containing user data, should ideally be located on a different physical disk and have a size of 8-10 GB. 7. Provide username and password, as well as the name of the computer, click "Install." After reboot, the system is ready to work.

Related Videos

A scanner is a device necessary for converting a wide variety of documents into electronic form, from texts and tables to photographs. Scanner models are constantly being improved, their functional probabilities are increasing, and prices are decreasing, so that the scanner is increasingly finding its place on the table next to the home computer.

To take full advantage of the possibilities of modern special scanning technologies, you need to configure the scanner. Fortunately, with the origins of modern USB models and operating systems, configuration is often done mechanically, just plugging the scanner into a computer. However, in other cases, the user may also need primitive steps to configure the scanner. Their approximate sequence may be as follows: 1. First, connect your device to your computer. The operating system will try to recognize it and mechanically install it required drivers and configure the scanner. 2. Open the Scanners and Cameras item in the Control Panel. All imaging devices connected to the computer are listed here, as well as a shortcut to launch the wizard for connecting new devices. If the connected scanner is closer to this folder, it means that the connection was made successfully in mechanical mode. If it is missing, run the Scanner Installation Wizard. 3. Manually select the manufacturer of the scanner and the specific model name and click Next. If your scanner model is not in the list, insert the supplied driver disk into the drive and click the Have Disk button. You will need to provide the path to the device driver on the disk. As usual, required driver located in the folder with the name of the model of your scanner and the name of the operating system in which you are working. If you do not have a driver disc, try downloading them from the scanner manufacturer's website and specify the path to the folder where you save them. 4. At the next step, the wizard will offer to specify the port to which the scanner is connected. If in doubt about which port to specify, select "Mechanical port detection". 5. It remains to set the name of the new device in the system, and the installation is complete. Now it is allowed to use it from any program that supports working with images.

The local area network has a number of advantages for use within one organization: universal access to files and applications, as well as the joint use of technology: printers, scanners.

You will need

  • - the local network;
  • - scanner;
  • - the Internet.

Instructions

1. Use the RemoteScan 5 application to share the scanner over the network. Download this program from the link http://www.cwer.ru/node/6585/. Then install it on computers. Accordingly, to the computer to which the scanner is connected, the server version, to the rest of the PCs to which you need to connect the scanner via the network, the client version.

2. Please note that when installing the client version of the program, a message about the absence of a scanner may appear, do not pay attention to it. After the conclusion of the installation of the server part of the application, right-click on the program icon in the system tray. To access the settings.

3. Select the scanner, configure the ports to access it. Please note that it may take from one to 3 minutes to identify the device. If not, then your scanner model is not supported by the application.

4. Wait for the strikethrough icon to disappear from the icon. Open your antivirus / firewall. Allow access to the scanner port, by default it is 6077. If you have NOD32 antivirus, then go to the personal firewall, open the settings, select the interactive mode, make a separate rule for the RemoteScan program. Install client applications on the required computers, add special software there, and scan over the network.

5. Use another program to share the scanner over the network, if your scanner was not detected by the previous application. To do this, download the Blindscanner software. Follow the link http://www.masterslabs.com/ru/blindscanner/download.html, select the required version, download and install the server and client versions of the programs on computers, respectively. The setup is similar.

There is hardly a single user computer technology, who would not be unnerved by the confusion of wires connecting all kinds of peripheral devices to the computer. Cables are extremely inconvenient when working with a laptop, tea, they nullify all the advantages of computer mobility. It is no accident that connecting devices wirelessly - all kinds of wireless keyboards, mice, printers, and more - have become such a fast-paced and robust celebrity.

You can get rid of one more wire - the network one by organizing a wireless wi fi network in your home or office. It will provide high-speed Internet access anywhere in the room without wires, making both work and play even more convenient. In addition, such a network will be available not only for computers, but also for other equipment that supports wi fi, say, phones and printers. In order to set up wi fi, you will need an access point or, if the Internet is supplied using special ADSL technology, an ADSL modem router.1 ... Connect and configure wireless router... This process is quite primitive and accessible to any user. Follow the directions in the documentation for your model. Let's just note that if it is permissible, then it would be better to make the distribution of IP addresses mechanical. This will simplify the procedure for logging into the network for new equipment. 2. Configure the entire computer to work in wireless network... Many laptops have a built-in wi fi adapter, while a desktop computer may require wireless Network Card, which will need to be purchased separately. Setting up a wireless network is slightly different from setting up a regular network. The only thing that needs to be done additionally is to enter a special secret network code generated by the router. The code will allow you not to worry about third-party users being able to connect to your wireless network. 3. To connect to the wireless network of a pocket computer, it is easier for everyone to use the built-in iPAQ Wireless utility or similar, depending on the model of the pocket computer or phone. Here you will also need to specify the secret network key. After you managed to set up wi fi, it becomes possible not only to use the Internet from any of the devices on the wireless network, but also to use a local network: provide universal access to folders, collectively use a printer and scanner etc.

Related Videos

Probably you are familiar with the situation when there are two or more PCs at home. Exchange of information between them, the use of one printer or scanner, as well as others peripheral devices provides for the need for the existence of the network. But PC users need tea not only access to local sources, but also to the vastness of the global network. In view of this, you should figure out how to perform the setting exit v the Internet from a universal modem.

You will need

  • Personal computers, modem.

Instructions

1. Open the control panel of the whole PC, find the icon called "System" and click on it. In the properties of "System" go to the "Computer name" tab, select the "Change" option and write to everything personal computer his name, as well as one general group.

2. To apply the executed changes, reboot both electronic devices a.

3. After restarting the PC, open the control panel, click on the "Network connections" item and select the "Local network" properties.

4. Configure the "Protocol the Internet a (TCP / IP) ". To do this, you need to connect the used modem to the hub, manually register the IP address, the Mask of the made subnet, and also the "Rod gateway".

Related Videos

Note!
When assigning an IP address to all of the computers on the local network, check them carefully to avoid duplication, because the coincidence of the IP address of electronic devices may become a reason for their discord and, as a result, the impracticability of working on the same network.

Helpful advice
On the "Rod gateway", that is, the modem, write down the 1st address (for example, 212.120.0.1), and select the IP address for PCs entering the local network from the range 212.120.0.2 - 212.120.0.255. The subnet mask for all devices will be identical.

Several PCs in an apartment or in an office does not mean at all that all of them need to be connected scanner or the printer separately. To make scanning and printing devices available to everyone, connect office equipment by the network .

You will need

  • - Several computers;
  • - scanner;
  • - driver;
  • - the local network.

Instructions

1. Equip computers with network scanner ohm. The likelihood of using office equipment on equal terms will be received by all participants of the local the network... Tune and install the hardware positively. To avoid complications in the network scanner but consider some of its features and subtleties.

2. Please note, the network is connected scanner at ease to switch through the hub. If there are enough USB ports, then a hub is not indispensable. The main difference between network scanner s from ordinary ones - lack of binding to one PC.

3. Complete the setup steps the network in the following sequence: - Install drivers for scanner a, from a disc from the manufacturer to all computers connected to the network; - execute the driver configuration; - assign to the network scanner have your own IP address; - connect the equipment to the switch; - enter the IP value into the newly made TCP port. The network equipment will be connected to the server. The scanner will be able to send finished images to the specified computer or e-mail address.

4. Consider the likelihood of customizing the ordinary scanner and with support for WSD service. To do this, connect the equipment to the network, make sure that scanner switched on. Click on "Start" and go to the "Network" tab. Discover the icon scanner and by clicking on it with the mouse (right-click) select the "Install" item. In the User Account Control dialog box, click Continue. Click on the line "Your device is ready to work", check the parameters and click "Close" (Close).

5. Now click "Start" again, find the "Control Panel" option, go to "Devices and Printers". Make sure the network icon is present. scanner a. Now perform a scan using the WSD service. Network name scanner but will be displayed on all computers participating in the local connection the network .

Note!
WSD service is available in Windows systems Vista.

Helpful advice
The network scanner icon will be displayed with the name of the equipment being used.

At a certain stage in the formation of a retail entity, the manual form of accounting ceases to satisfy the needs of this trading enterprise. At the same time, the lack of an automated accounting system often leads to financial theft caused by employee abuse. Consequently, an automated accounting system "1C: retail" is being introduced at the trade enterprise, which must be positively adjusted.

You will need

  • - Personal Computer;
  • - "1C: retail".

Instructions

1. Complete the preparatory work. To do this, configure the "Store" (enter the name of the store and configure account). "Warehouses" can be represented not as a solid warehouse, but as a whole structure (utility rooms, sales areas and other objects).

2. The "Products" setting implies entering the maximum detailed information on the products sold: contractor, expiration date, composition and more. Configure the "Prices" section. The pricing mechanism in this automated system elastic and primitive: if a metamorphosis of prices is planned, a date can be set in 1C: Retail from which new prices will begin to be made.

3. When setting up "Discounts", consider the fact that there are three types of discounts: when buying an item for a pre-specified amount, when buying a certain number of items, using a discount card.

4. Execute the "Access Rights" setting: this will allow any user who will be given access to this integrated program, determine only the actions appropriate to his position. This will exclude fraud on the part of the employees of this trading enterprise.

5. To improve the performance of the retail outlet, perform the correct setup of the equipment used. A responsible approach is required to the choice of commercial equipment. Among the most common equipment, there are fiscal registrar, barcode scanner; and label printers.

6. The final stage of setup is operational management. An integral part of good governance is reporting and reviewing.

Note!
If important tasks appear while working with 1C: Retail, immediately contact your system manager for support.

Helpful advice
The 1C: Retail program is designed to minimize routine work. Due to the fact that it owns most of the functions, this software is easy to customize "for yourself."

The task associated with how to scan over the network via a usb scanner is not so difficult and complicated as it seems to many users of office equipment at first glance. First, you need to select a router and flash it. Find out how to set up a network scanner or mfp with the ability to scan in more detail below.

First of all, download the OpenWrt Backfire 10.03.1-rc5 firmware from any reliable web resource.

  • Start the firmware installation using special utility restore for your router model - usually Firmware Restoration.
  • Establish a connection between the router and the computer using any LAN port.
  • Put the router into recovery mode. To do this, turn off its power and hold down Restore or Reset (depending on what is written on the button of your device).
  • After that turn on this device and holds the button until the power indicator starts blinking.
  • Do not make any settings related to IP addresses. You can only assign your personal computer an address that will be different from the standard "192.168.1.1".
  • Open the firmware recovery program and first disable the firewall - if you don't, the utility will still ask you for it.
  • Select the previously downloaded firmware file that has the extension .txt. After that, wait a few minutes until the installation comes to its final end and the router appears at the IP address "192.168.1.1".

First steps to set up

  • At the first stage, change the router password in the appropriate tab.
  • Go ahead and set up access in The world wide web and DNCP server. If you are not satisfied with "192.168.1.1", then you can safely change it. In the future, you will need to configure the device exactly to this IP address.
  • The next step is to configure the packages. Click on "Update package lists" and find through the "Filter" packages nano, sane-backends, sane-frontends, xinetd, kmod-usb-printer, then install them. Upon completion this process be sure to reboot the router.

Setting up scanning

  • To successfully solve the question of how to scan over the network using a USB scanner, connect to the router via SSH.
  • After that, you can either get lucky or not. In the second case, you will have to deal with additional settings.
  • Now you have to edit “/etc/sane.d/xerox_mfp.conf”. Add to this file these two lines: "usb 0x04e8 0x341b" and "usb libusb: 001: 004".
  • Save your changes and then check if the configured scanner is detected.
  • At this stage, you need to do its local configuration. Add this line "192.168.11.0/24" to the file "nano /etc/sane.d/saned.conf" - in this case, you need to specify the subnet of your router.
  • A small change will also have to be made in the nano /etc/xinetd.conf file. To do this, you need to add "service saned" to it, then between the opening and closing brackets "(... ..), write given code(without quotes):

Socket_type = stream
server = / usr / sbin / saned
protocol = tcp
user = root
group = root
wait = no
disable = no "

  • Finally, run xinetd in a mode called so-called output. debug information. After that, you must make sure that the service is actually running. If this did not happen, then open the file "/ etc / services" and if the line "saned 6566" is missing, be sure to add it.

Install SaneTwain

  • Download SaneTwain and install it. To do this, you need to run the "scanimage.exe" file.
  • After that, specify the address of your router in the settings window that opens and restart the program.
  • You will most likely encounter a server connection error after performing a restart of SaneTwain. To solve it, pay attention to the "syslog" entry, which is located in the web interface. Then add a named entry for the IP address of the device to "host" [email protected]: ~ # nano / etc / hosts ".
  • Add the line "192.168.11.1 OpenWrt" there, and then restart the xinetd add-in.
  • Reboot SaneTwain - it might work as it should this time.
  • Open the web interface of your router again and enable xinetd autostart there.
  • Copy the second file from the archive with SaneTwain called "sanetwain.ds" and send it to the twain_32 folder located in this path: C: \ Windows.

Setting up printing

  • To configure printing, install the package named "luci-app-p910nd".
  • Then go to the web interface and check the boxes next to Enable and Bidirectional mode. In the Device field, enter / dev / usb / lg0, and in the Port, just put 0.
  • Then make sure that the server will start normally after the device is rebooted.
  • Now go ahead and set up the printer itself by filling in the fields with the port name and IP address. In addition, you will need to enter the port number as well.
  • At the end, you can make a test print to make sure that all the above steps were really done correctly and correctly.

If necessary, you can clear space on the router for other software applications... The idea is to remove any backends that you no longer need. To do this, connect via ssh. You can find backends here: "/ usr / lib / sane /". The most important thing in this business is not to get carried away with cleaning and thereby not destroy the files that are really necessary for the normal operation of the equipment.

Thus, configuring the scanner via USB so that it can be used over the network is not that difficult. Of course, an ordinary user may come across a number of incomprehensible names for themselves, so it is very important to follow the instructions and move strictly step by step towards solving the problem.