Adding a font in Windows 7. How to add new fonts in Windows

By default, Windows 7 operating system contains a lot of built-in fonts. Starting from Cyrillics and ending with symbolism fonts. However, they may not be enough. For example, you want to use some beautiful font For registration of a festive card or may be for paperwork. There may be a lot of reasons. Therefore, as part of this article, I will tell you how to install fonts in Windows 7, at least two methods. One simpler and automated, the second for manual installation.

But before telling how to install fonts standard windows tools 7, I would like to draw your attention that for the same purposes you can use font managers. Which allow not only to control the set of fonts, but also make their backup copies.

Note: It is worth knowing that you should not install all the fonts you found, as each added font slows down the loading of programs, although not much.

Note: It is worth knowing that when installing fonts are recorded in a special catalog, and in windows registry The appropriate entry is created.

Let's proceed.

I will start with the simplest and automated method how to install fonts in Windows 7. You will be surprised how easy it is.

1. Download the font and if it was in the archive, then unpack it into any directory.

2. Now, click on the file double-click Mice.

3. A window will open where information about the font will be shown. In the upper left corner, find the "Install" button and press it.

4. If the font is already installed, the corresponding window will appear where it will be necessary to confirm the action or reject.

Installation of the font occurs very quickly and no alerts appear. Is that the Install button becomes inaccessible. By the way, when you re-open the file from an arbitrary directory, the Install button will always be available.

5. The window can be closed, and the font can be used.

As you can see, installing the font in Windows 7 is very simple. However, it is always helpful to know alternative methods.

Note: To in the program installed fonts become available, you must restart it.

This method how to install fonts in Windows 7 allows you to produce everything you need manually. An indisputable advantage of it is that you can add several fonts at once (sometimes, very convenient). So here is the instruction.

1. Download the font files and place them in some directory.

2. Open the "Start" menu, after which you type "Fonts" in the search string. At the very top there will be an appropriate item, you need to click on it.

3. The catalog will open where all the fonts are stored. Immediately warn you that it differs in appearance from the usual guide directories and the icon in the panel running programs It will be like a toolbar.

4. Now, it is enough just to transfer the fonts downloaded to this directory. Please note that no messages will be, the fonts are simply installed.

5. Fonts can be used.

As you can see anything complicated, but there are nuances. To see the fonts in the list (in the directory), you must execute another instruction.

1. In the open catalog "Fonts" in the left part, find the "Font Settings" item and click on it with the left mouse button.

2. Remove the check mark opposite the item "Hide Fonts Based on current parameters Language.

3. Click the "OK" button.

After that, all installed fonts will be displayed in the directory, regardless of the current localization.

How to remove fonts in windows 7

Now consider the feedback, namely how to remove fonts in Windows 7. In this case, standard means Provide only one method - through a catalog with fonts.

Note: Note that by dragging the mouse files from the directory, they can only be copied, they will still be stored in the catalog.

1. Open the Fonts window by using steps from the previous installation instructions.

2. Find the desired font and right-click on it.

3. In the menu that appears, select Delete.

4. A small window will appear where it will be necessary to confirm the operation.

In some cases, the user needs to change the standard font to another or install a new one. This may be several reasons. Perhaps other like more and read it is more convenient or the program does not work with standard, in this case you have to install additional.

There are several types of fonts:

• First that TrueType.. It can be defined absolutely any size, while it will not lose the clarity and display quality, they are also easily displayed using system devices.
• Openmentpe - Supports rotation and scaling, saving the definition of the display. It can also be seal through standard utilities.
• Technology Cleartype Created to display text on the screens of liquid crystal monitors on which they look much better.
• PostScript. - Developed by Adobe Systems. Different high quality and detail.

It is worth noting that this font installation instructions are relevant for Windows 7, 8, 10.

Where are the fonts and how to find them

There are several ways to find installed in this moment on the device fonts. The first way implies the action directly through the conductor. To enter the directory, the user will need to go along the way C: \\ Windows \\ FontsThis folder will be files with all set species. To not search for a directory yourself, you can press Win + R and enter % windir% \\ fonts In the window that opens.

The second way implies use control panels. In this case, it is necessary to start it through the start, after which it will remain to find the fonts section.

You can also simply enter the desired name. in the search string, After that, open the directories found.

Installation procedure

Here will be the most simple and effective ways By installing fonts.

In the first method, the user will need to go to the downloaded file and click on it with the right mouse button. Then it's worth clicking on the string Setwhich will be available in the pop-up context menu.

In the second method, the user will need to get into font folder, several ways to do this was described in the previous section. Next, you need to click on the menu item file and select the section Install font. In the window that opens, specify the path to the downloaded file.

The third way implies a simple dragging a downloaded file in standard folder.

Installation of fonts label

In case the place on system disk The user has a bit, and the need for installing new fonts is available, they can be installed as shortcuts. To do this, have to do several actions. To begin with, you will need to go through control Panel in the desired utility. Then, in the left part of the menu that opened menus should be selected. Parameters.

In this menu, put a tick to the item that allows installation as shortcuts.

Now, after clicking on the downloaded file, an additional string will appear in its menu, which will allow you to install Windows font as a shortcut.
In this case, the downloaded data will not be copied to the standard folder, however, if the initial file is moved to another location, the font will be unavailable and will have to be installed again.

How to remove or hide the font

To delete or hide the font, it is enough to go to the folder where they are all stored. After that, you can click right-click unnecessary file. and click " Delete" This is completely erased file from the system. If the user wants some of them to be unavailable, you can choose the item " Hide", Which will save them on the device, but will do inaccessible in the editors.

Do not forget that there are several elements, without which the system will not be able to work or will be buggy. Here is a list of files that cannot be deleted in any way:

• Courier New.
• Arial (including options: Bold, Italic, Bold Italic);
• Times New Roman. (including options: Bold, Italic, Bold Italic);
• Symbol.;
• WingDings.;
• MS Serif.;
• MS Sans Serif..

How to install a non-standard font

In case the file has a non-standard extension or type, the system may swear on it. In this case, it is still worth trying to install it, but if it fails, it will remain download Data In the format that the system understands.

It is also possible to use one of online software for conversion of file typeswhich are now available on the Internet, it is worth searching for "PS TO TTF" request, just putting your file extension instead of the first item. After that, you can try to install a converted file.

What to do if the font is not installed

About what to do if the system swears to the fact that the file is not a font file, written in the previous section. It is worth using the converter or download it from another place. However, there is another nuance. Users dozens even knowingly working files may not be installed if the built-in firewall is disabled. If you activate it, the information is performed excellent, this method is worth trying to all windows users 10 If the installation fails.

If necessary, use an additional font not included in standard system Windows, it can be very easy to install it.

For this you need:

Why set new fonts

There are a number of reasons for the installation of new fonts, as well as the spheres of professions that can be small.

Main reasons:

1. the inability to open the file if individual parameters are used in it. In this case, the system will automatically select the font, but errors may occur when conversion and the translation will be a curve;
2. the customer or teacher put the requirements for registration that are not included in the Windows package;
3. if you wish to stand out and make the original signature;
4. when making a congratulatory message in this way, you can add individuality.

Who may need:

1. students;
2. photoshoppers;
3. graphic editors;
4. teachers;
5. designers;
6. anyone.

Where to get

Sources There are a whole set. The first and most popular - on the Internet.

For this you need:

1. enter the appropriate request in the search string;
2. go according to the link you like;
3. select fit font;
4. click on it for download;
5. save on your PC.

Important! Use proven sources in order not to download the virus to your computer.

Additional options:

1. create yourself using graphic editors;
2. ask a friend to overlap by mail or threw off onto the carrier;
3. buy in the store.

The next step is to install, there are several options here.

Methods

There are two ways to install the font to the computer. Both are correct and simple. Each chooses optimal for themselves.

It is worth noting that these files have a format:

1. .fon;
2. .ttf;

Important! When installing files with identical nameWillov can not distinguish them. It is fraught with the fact that the type of font can change.

Normal installation

This is the easiest and most popular way. It does not require unnecessary transitions and knowledge, while takes at a minimum of time.

Algorithm of actions:

All is ready. No need to do anything else. You can open MicrosoftWord and the list of fonts to see just installed.

Installation in the Fonts folder

All fonts wINDOVS systems Store in the Fonts folder, there and you should install new ones.

Important! The more fonts are installed, the longer programs are launched with their use. Therefore, not used - it is better to immediately delete.

For installation it follows:

Important! The name of the file being installed may differ from the name specified in the program. In order to find out this name, you must click right-click on the file and select View item.

Now you can enjoy new design letters. It should be noted that Photoshop and similar programs may require additional steps to install.

Note. It happens that the user cannot find the Fonts folder. In this case, it can be just hidden. You need to go to any folder, find the menu item Sort, in it, the folder and search options string. Next tab View and in additional parameters Find "Show hidden files, folders and discs. " Click OK or Save.

Video: Search and Installation Font

Check font

In order to make sure that everything is done correctly need to run a Word or any graphics editor. Next, in the Font tab found just installed. Select it and write something in the text input field.

Compare a font if it continues to work as the same. If not, it may have been a conflict due to the same name, or the file itself is with an error.

How to properly install fonts in Windows 7 through the control panel

In Windows 7, you can add fonts using the control panel. For some, this is the optimal way.

Algorithm of actions:

Important! If such a string is not visible, you can view (there is at the top right) Select minor icons.

From a variety of ways, each chooses suitable for itself. It should be remembered that in the Internet there are many viruses able to infect PC and spoil it or spy for his master. Therefore, only reliable sources should be used.

If something fails, the reason is most likely in a non-working file or system conflict.

Fonts automatically appear in all programs where it is the option of its choice. However, in Photoshop may not appear, then additional installation will be required.

If you have installed an appropriate font, it is better to delete it immediately to not clog memory and speed up the download of programs.

For this you need:

1. open windows folder, it is on the disk with;
2. find the \\ fonts folder;
3. select an object to delete;
4. press the right mouse button;
5. of context menu Select delete;
6. confirm deletion.

Important! It should be carefully conducted this operationsince there are fonts necessary operating system For normal operation.

Windows operating system allows centrally controlling fonts that can use all installed applications. Instead of downloading data separately in Photoshop, Microsoft Word. And some other programs, you can install a new font directly in the OS. After that, it will be available for use using any software. This article describes the process of installing new fonts in different versions Windows: XP, 7, 8 and 10.

general information

The font defines the appearance of printed symbols. The most obvious areas in which such cosmetic changes can be needed - work with text or graphics. Writing Articles, Web Development, Creating Diplomas or Greeting Card Templates - for all this may require new non-standard fonts.

Connections can be divided into 2 stages: download the file and installation. To find files You can on specialized sites, designer forums and torrent trackers. Windows supports all popular extensions: Openmentpe (OTF), TrueType. (TTF), PostScript. (PFM). The installation process is the same for all types, but it differs slightly in different versions of Windows.

Extract from archive

Frequently loaded files from the Internet are reserved in a special compressed folder - archive (for example, with extension.rar or. 7z). This is done to save space on the server and reduce traffic.

To work with the contents of such objects, they must be unpaved. For this, special programs are used - archivers. If on yours personal Computer There is no such software, it needs to be installed.

Download WinRar utility from the developer's official website - http://www.win-rar.ru/download/. Do not forget to choose the right one. The program will start on any version of the OS, including on the 10th.

Load the desired version And install the archiver, following the installation wizard instructions (Install Wizard). When the process is completed, right-click on the saved archive to call the settings, and select the option " Remote"(" Extract "). In the window that opens, you need to specify the folder in which you want to unpack the content. Now you can start setting.

Windows XP.

Two ways to install new fonts are available in Windows XP. Both are very simple - sufficiently minimal skills of owning a personal computer.

The first way is to copy downloaded files to the desired directory manually:

You can also use the standard windows tool XP:

Now you need to restart all active programs so that their settings are updated. After that you can choose a new font in them.

Windows 7 / Vista

Compared to the XP version in Windows 7 and Vista, the developers made the font connection process even easier:

Similarly previous versionUsers can also simply copy all the files to the folder " Windows / Fonts.».

If you have left on your system disk little place, you can place a massive "body" of the font elsewhere and connect it using a shortcut.. First, this feature needs to be included in the system settings:

Now when connecting new fonts, you can select the option " Set as a shortcut».

Note: If you delete the file or take it to another place, the font will stop working.

In Windows 10, too, there is a similar function, and it starts in the same way.

Windows 8/10

The process of connecting fonts in Windows 8th and 10th versions is similar.

FirstlyUsers can simply move the desired files to the system catalog " Fonts.", As in previous releases.

Secondly, in Windows 10 you can Just open the downloaded font, clicking on the file twice. In the window that opens will be a presentation external view Symbols, as well as the Install button. Click on it, and everything will be ready. As in former versionsYou will need to restart all running programs to update their settings.

Video on the topic

Need to B. independent installation New fonts occur not often. Usually it is required only to those associated with the design of documents or is engaged in printing work.

Generally speaking, Windows 7, unlike its predecessors, automatically registers fonts when their files fall into the folder \\ Windows \\ fontsAnd does not require a special installation procedure. However, it is still better not to use this technique. First, the font name does not match the file name of the font, and therefore it is not always clear what was found in this way. Secondly, the description of some fonts (for example, TURE 1 fonts) is stored in several files, which can cause errors when manually copying. So it is better to act methodically.

Font Installation:

1. Open the folder with fonts (Start Control Panel - Fonts). Give an icon.
2. Give the command: File Font The Font dialog box opens.
3. Specify the disk and folder containing the files of the desired fonts. At the same time, the search is performed and a list of available fonts is formed. Depending on their number, the procedure may be long.
4. Select the required fonts in the formed list, select the Copy Fonts check box into the Fonts folder and click OK. The process of copying new fonts with their simultaneous registration will begin.

If the font is already installed, its replacement new version Not produced. You must first remove the old font, and then in the usual way to install a new version. Font removal is carried out in the same way as deleting any files. In the installed Windows 7 operating system, special precautions do not need.

Font Set Coding System

With each symbol of any font is associated with a numeric code. For many years coding text symbols A long way has passed from five-digit coding (32 distinguishable symbols) to six, seven, eight-digit and further to the sixteen-digit.

The most long time is practiced eight-bit coding introduced in the early 60s of the last century. It allows you to encode kits containing up to 256 characters. Such a set before using the font, (it is required to install) can cover numbers, punctuation marks, generally accepted designations and letters of one or two national alphabets.

However, with the development of the Internet and other means of communication, the level of international communication has increased dramatically, and the eightic encoding has ceased to correspond modern requirements. Replaced him new standard - Unicode. He secured the unique sixteen digit number for each symbol of various national alphabets. The UNICODE standard corresponds to all fonts of the OPERTRATURE, as well as some True Tour fonts.

In the literature, you can often find a superficial judgment that Unicode is a two-byte coding system. In fact, this is not quite so, because sixteen discharges of the sequence number of the symbol are far from always presented by a pair of bytes. They may be one, two, three, and in some cases and four bytes. The number of bytes in the symbol encoding determines not the Unicode encoding system, but the associated bite conversion mechanism in bytes, which is called UTF (Unicode Transformation Format).

• If you apply the UTF-8 conversion mechanism, the English-speaking characters will be recorded only by one byte. For them, this is possible, because in the Unicode table, they occupy the honorable first places (older discharges in the 16-bit record of the symbol number are zero, and they are simply discarded).
• A little bit worse than Russian and other European languages. Their characters can not be recorded by one byte - only two. And the symbols of oriental languages \u200b\u200bhave to record three bytes. This mechanism is most profitable for England and the United States and is not profitable for Japan, China and Korea.
• If you apply the UTF-16 conversion mechanism, then all the characters of all languages \u200b\u200bwill be recorded exactly two bytes. This mechanism is most profitable for China, Korea and Japan and the least beneficial to England and the United States. Russia and other European countries do not care what mechanism to use: UTF-8 UTF-16.
• There is still a TF-32 mechanism that converts the symbol code into four bytes, but this is a special operation for special characters,
• For benefit email The TF-7 mechanism, which transforms 16 discharges of the character number in eight-bit octets, in which 7 younger discharges are significant. The number of octets obtained depends on the language on which the message is recorded. The meaning of the conversion is to optimally prepare the text to forward and prevent the clumsy attempts of postal systems to apply their byte conversion algorithms.

For example, the Chinese symbol encoded by UTF-16 encoding is two bytes. In this encoding postal systems Each byte will appear in two and eventually move 4 bytes, while in the encoding, the symbol could be immediately presented by three bytes that do not require additional transcoding. This ensures the savings time of the system and reduce the load on the communication line.