home / Problems/ Reset windows 10 password without installation disk.

Reset windows 10 password without installation disc.

A terrible thing happened: your password in Windows 10 does not work, and the system does not want to let you in. This can happen for various reasons: forgot the password, accidentally changed children, deliberately changed ill-wishers or malware. In any case, we have the following: the password that was set does not work, and you really don't want to reinstall the operating system completely. Below I will tell you how to reset the password on Windows 10, but before all the manipulations, make sure that:

key not included Caps lock(it replaces all entered letters with uppercase, and the password is case sensitive). If you have such a situation, then press this key and try to enter the password again.
you enter the password on the correct keyboard layout (Russian, English, possibly some other language);
all characters are entered (no keyboard problem).

Are you convinced, but the password still does not work? Then we move on to decisive action. Before you start removing your password, you can familiarize yourself with how to remove a password in Windows if you have access to your account. "".

Reset Microsoft account password

Perhaps the easiest way to regain authority over your account and log in. Valid, however, only if you logged into the computer using a Microsoft account (created it during system installation / first logon, or used a previously created account). If you did not register with Microsoft, then you can go down to another section of the article, where we will discuss another option.

To reset your password, follow this link: https://account.live.com/resetpassword.aspx. You can do this on another computer or from your phone.

Choose the appropriate option, for example, you forgot it or you doubt that the computer correctly recognizes the entered characters (this is the 2nd option, which is displayed in the screenshot above). Next, the site will offer you to specify any of the two contacts - email or the phone number associated with your Microsoft account.

We remove the password on Windows 10 using the installation

If you are logged in through a local account, and any account Microsoft entry does not appear in any way, password recovery will take a little longer. You will also need a so-called LiveCD - a disk (or flash drive) with a set of programs and installation files... But the disc is also quite suitable for Windows installations 7, 8 or 10. I think that one of the images you have burned to a CD, it remains to put it in the drive. Yes, if you don't have such a disk, then it's time to make one. After all, installing Windows is simple and on this site you can find detailed instructions on how to do it.

To do detailed instructions, let's take as an example the situation when there is an installation Windows disk... We reboot the computer and boot from it. If you are not familiar with the concept of "how to set disk boot into BIOS", then I recommend reading the article "". We need to start the Windows installation. As soon as this happens, at one of the first steps of the installation (choosing a language or agreeing to the license agreement) press the key combination "Shift" + "F10" - this will bring up the command line. Maybe, this option does not help open the command line, then you can use another option - on the left, select "System Restore".

Here's an example installation disk Windows 10:

If you are working with a Windows 10 disk, then here are the steps you need to follow to open a command prompt:

first of all, click "Next";
then "System Restore";
now "Troubleshooting";
Click " Extra options»;
Select "Command Line";

If you have Windows 7, then after a few minutes of waiting (depending on the computer) in the window that opens, you need to select "Troubleshoot", then click on "Advanced options" and already in last step choose "Command line".

So, you have opened the command line, now in order to perform the password reset operation in Windows 10, you need to know exactly which disk the operating system is on. There are two ways to find out:

We enter in turn the commands "diskpart" (a utility for working with hard disks of a computer), then - "list volume" (we get information on disks). After entering each command, press "Enter".

Thus, we understand on which of the drives in the list the OS is installed and remember the drive letter. For example, in my case, this is drive D.

Another option that will allow you to find out on which disk the system is installed. Launch "Notepad" by entering "notepad" into the command line and do not forget to press "Enter" after entering the command.

After these actions, a notepad will open, select the top left: "File" - "Open". In the window that appears, we examine our computer to find which of the drives contains the "Windows" folder, and remember the drive letter. This option is suitable for users who cannot figure out the first option.

Now that you know exactly the drive where the system is installed, let's get down to business. So, back to our command line, which we launched earlier. We know the drive letter. Yes, in most cases the OS is installed on drive C, I will further indicate the letter D, but in your case it is most likely drive C. You will replace the letter with your own if yours is different. To exit the disk tool, enter the command "exit" and then press "Enter".

Now we write the following command on the command line: “ movec: \windows \system32 \utilman.exec: \windows \system32 \utilman2.exe"(After entering the command, press" Enter "again). If everything is correct, you will see a success message. Then we enter: " copyc: \windows \system32 \cmd.exec: \windows \system32 \utilman.exe". Let me remind you that after each command you enter, you must press the "Enter" key on your keyboard.

When the above commands are used on your computer, you need to restart your computer in normal mode(close the command line and the installation window, after that the computer will start rebooting - for the Windows 7 installation disc), but before restarting the computer, do not forget to remove the disc from the drive. Close Command Prompt and click "Continue" - if you have a Windows 10 installation disc (if you have a different drive, just restart your computer). When your system is loaded, we get to the login form and click on the icon " Special abilities"(Located at the very bottom on the right). If we did everything right, it should start command line.

Attention: if for some reason you do not have screens similar to the screenshots above, for example, you booted from a LiveCD (it is better to use the Windows installation disc) and you can access files on disks without logging in, your task is to first rename the utilman file .exe to utilman2.exe and then copy the cmd.exe file (the file is located in C: \ Windows \ System32), and then create a copy of the cmd.exe file in system32, changing it to the name "utilman.exe".

When the command prompt opens, enable the "master of all Windows" (Administrator) account. To do this, write the command “net user Administrator / active: yes” (for the Russian version - “Administrator” will then turn out “net user Administrator / active: yes”) and press “Enter”.

After that, the list of computer users is activated New user- Administrator - this account will help us to reset the password in Windows 10. After these steps, the “Administrator” account should appear at the bottom left, but it may be necessary to restart the computer or laptop to update the list of users. As soon as it is displayed - enter it without a password (click on it with the left mouse button).

On the left click on "Administrator":

After logging in (which may take longer than usual, since the account was not loaded before), right-click on the "Start" button and select "Computer Management" in the menu that appears (there is another option - hold down the "Win" - "X" keys ).

Will start Windows tool... You need to find the item "Local users" - "Users" on the left in the tree. Now find your user in the list of users, right-click on it and select "Set password".

The system will display a warning, which you need to familiarize yourself with - click on "Continue".

Note: after resetting the password in this way, it is recommended to return everything to its place: disable the "Administrator" account by entering the command "net user Administrator / active: no". Then return the "Accessibility" icons. To do this, delete the utilman.exe file from the System32 folder, then rename utilman2.exe to utilman.exe. If renaming fails in the graphical Windows interface 10, then you need to use the command line. To execute the commands, you need to boot into the system recovery mode (this was discussed earlier), open the command line and enter 2 commands:

del C: \ Windows \ System32 \ utilman.exe
move C: \ Windows \ System32 \ utilman2.exe C: \ Windows \ System32 \ utilman.exe

After that, you can forget about the password and you can use the computer.

How to remove a password through the registry editor

To do this, boot from the installation disk, press "Shift" + "F10" (perhaps, in your laptop, you must also hold down the "Fn" button) and after that the command line will open. Now enter the command "regedit", press "Enter". When the registry starts, click on "HKEY_LOCAL_MACHINE" with the left mouse button, click on "File" and select "Load hive".

After that, we find our section by name inside HKEY_LOCAL_MACНINЕ, select the "setup" section in it, and in the right part of the window change the value "CmdLine" to "cmd.exe" (you must double-click on the "CmdLine" parameter and enter cmd.exe), and change “SetupType” to “2”. For the changes to take effect, click "File" - "Unload Bush" and confirm our intentions. After that, you can close the registry and command line, restart your computer.

Now with booting Windows the familiar command line window will appear, in which, by entering the command "net user user password", we will set any New password to enter specific user to the system (“user” is the login name, “password” is the new password that you want to set). Then we write "exit" and press "Enter" - to exit the command line. You do not need to disable it, as the next boot will return the registry settings to their original values.

Here is another option for how you can remove the password (so that you understand how to work in a given situation):

Authorization in Windows 10 by entering a password is one of the mechanisms for protecting a computer and personal data. But having different passwords on each site, the user can easily confuse them and enter the wrong password to log into Windows 10.

If the user has forgotten the password for Windows 10, this is not a reason to reset or reinstall operating system... The developers have saved several methods through which you can restore forgotten password from your Microsoft account. Immediately, we note that in Windows 10 there are two types of accounts: local and Microsoft account.

We get access to the Microsoft account

If you forgot your account password, here the Windows 10 developers give you the opportunity to instantly restore access to your computer. But first, make sure you're not using a local account. To do this, look at the form where you need to enter the password. If e-mail is specified as the username, follow the steps below. Otherwise, proceed to the next section.

We fill out the online form offered by Microsoft to restore access to the problematic account. Here we set the reason why we want to restore access to the account. Next, you will have to prove to the system that it is the user who is the owner of the account, the password from which he forgot and is trying to recover: we enter the attached telephone number and email address. Then we enter the code received by mail or in the form of SMS, after which a form will appear with a proposal to set a new password to log into a computer with Windows 10 and confirm it.

If the user has entered all the data correctly, a form will appear with a proposal to set a new password and repeat it.

There are times when the user does not have a phone at hand, the ability to access the attached mailbox or does not remember additional email address... In this case, it is recommended to fill out another questionnaire, which includes a number security questions, including your personal data entered during registration.

All actions must be performed from a computer connected to the Internet, or use another device, such as a smartphone or laptop, to gain access to your Microsoft account.

In order not to repeat this time-consuming procedure, forgetting the password again, Microsoft suggests using one of the alternative authorization methods - using a pin code or pattern key(picture + gesture combination).

Accessing the local account

Here you will have to suffer much more, because the access key is securely encrypted and you will have to use it to find it. special utility or try to restore access using the Windows 10 installation distribution.

We are loading from a removable bootable media with distribution kit "tens".
When loading a window with options for the installation language, hold down "Shift + F10" to start the command line.

We enter the sequence of the commands below:

diskpart

list volume.

We take note of the letter label of the volume on which Windows 10 is installed.

This is usually the C: \ drive.

We execute two commands:

Their meaning is as follows: rename the file "utilman32" to "utilman2", then create a copy of "cmd.exe" with the name "utilman32".

If the operation is successful, enter "wpeutil reboot" and press "Enter" to restart the computer.
After loading the OS, on the lock screen, click on the "Accessibility" link to open the command line.
We enter a line like "net user imya_polzovatelya parol", where we replace the command parameters with our own.
To see a list of computer accounts, enter "net users".
Immediately after that, you can log into your account using the new password.

If this method did not help to solve the problem, the procedure seemed complicated or incomprehensible, then use the Ophcrack utility, which also exists in the edition for working with removable media, Offline Windows Password Registry Editor.

There are plenty of instructions on how to use both products on the web.

(Visited 81,074 times, 9 visits today)

Sooner or later, each of us has problems with passwords! A familiar picture. You sit down in front of your computer hoping to finish urgent work, try to enter your Windows 10 login credentials, and then, to your horror, realize that you absolutely do not remember your password!

The first thing that comes to mind is that you need to work less at night ... You go through dozens of options and nothing, there was no access and no !!! And then an idea comes up - you need to reset your Windows 10 password! I think many people remember how to do this in old versions of "windows", but how to do it in the new one?

Fortunately, the reset procedure in Windows 10 is very similar to that in Windows 8 and older versions of the OS. Although with minor reservations. In this overview article, I'll walk you through the basic ways to reset your password. They are suitable for both Microsoft Live account and local accounts.

1. Apply Password Reset Tool to recover Microsoft Live account password

The first and most obvious solution is to use standard function reset, available on a special Microsoft password recovery service. On the service page, a window opens asking why you cannot log into Windows 10? You will be prompted to choose one of three options. In our case, the very first is suitable - "I do not remember my password." But this is only if, when installing the system, you linked your account with network service Microsoft account authorization.

I will not go into detail on this reset option. I will only note that the official procedure for resetting a password in Windows 10 is standard and you should be ready to go through verification. To do this, you will need to provide your personal data, such as E-Mail and phone number.

If this option does not suit you, no problem. In our area, Microsoft accounts are still not popular. Fortunately, there are other ways to help you regain control of your computer. The alternative ways to restore access in Windows 10 are not so obvious and use different workarounds. Let's take a look at them in turn.

2. Reset Windows 10 password via password reset disk

Using a Password Reset Disk is another common Microsoft way of restoring control. The only drawback of this method is that the disk must be created in Windows 10 in advance, even before access is lost.

By creating a Password Reset Disk, you can easily restore access to Windows 10. In the near future I will devote a separate article to this method.

3. We use alternative authorization methods to reset the main password

Perhaps you still have access to the operating system through alternate authorization? With a PIN, pattern or second account? If so, then you have a chance to log in in a roundabout way and reset your Windows 10 password via the command line.

Log in to the system with one of the alternative ways, press the Windows logo key and the X key at the same time. Find Windows PowerShell (Administrator) in the list of available system tools and launch it. PowerShell is an updated revision of the command line shell with enhanced capabilities.
Type the following in the utility window:

net user "account_name" "new_password";

Replace "account_name" with your account name,

Replace "new_password" with a new password (remove the quotes).

Success will be indicated by the message "Command completed successfully"

4. How to reset Windows 10 password via MSDaRT

Microsoft's DaRT (Microsoft Diagnostics and Recovery Toolset) has been around for a long time and helps IT professionals get their computers back on track. The DaRT functionality also includes the ability to reset the password. To do this, you need to boot your computer with boot disk DaRT Recovery CD and launch the built-in Locksmith Wizard. It is in this utility that you can restore the login for any account Windows entries 10.

Unfortunately, the DaRT toolkit is not free. This utility is only available to Microsoft Enterprise customers, TechNet Plus and MSDN subscribers.

5. Reset Windows 10 password via PCUnlocker utility

The PCUnlocker utility allows you to unlock a Windows computer that would have been locked due to a forgotten password. She represents boot image, which must be burned to a CD or USB flash drive using one of the appropriate programs. For example, UltraISO or Rufus. After booting from such a disk, you will see full list local accounts used in the current Windows 10 installation.

Select the required account from the list and click on the "Reset Password" button.
The program will check the status of the selected account and offer you one of the options for solving the problem:

Remove password if Windows account was protected by it,

Connect the associated Microsoft account to a local account,

Raise the rights of a standard or limited user to the administrator level,

Activate your account if it has been disabled,

Unblock a blocked account and so on ...

Once you reset your password and log into Windows 10, remember to set a new one and do your best to remember it in the future.

6. Password reset by rolling back to the previous state of Windows 10

If you do not want to use any additional software or if your HDD encrypted with BitLocker, you can use a different technology. Just roll back Windows 10 to the previous state where the old data is stored. Select the appropriate restore point and follow the standard steps to roll back the system Windows files 10 to older versions. But do not forget that after doing this, you will have to reinstall software installed after the date the restore point was created.

So what did we get in this article? I briefly showed you how to reset a Windows 10 password that you forgot or lost the hint to it. In the future, I will try to take a deeper look at each of the methods mentioned so that you do not have problems accessing the new OS.

Often times, the operating system password will be forgotten. This is not surprising - you can quickly write down the authorization data, work for a PC for several months, safely lose a piece of paper with the code and at one point realize that you need it. Someone will ask - but if a password is not required when logging in, why then enter it? Everything is simple - even on those machines that have disabled authorization, you may need to enter a password, for example, after manually blocking Win + L or after the next update. The thought immediately arises: how to remove the password when entering Windows 10?

Today we are going to talk about this. Moreover, the situation will be considered when you work under an account associated with Microsoft, and when a local account is used. The password reset process is similar to previous versions of Windows, but there are some differences. We will assume that for some reason you do not know your password, for example, you have simply forgotten it.

First of all, try to enter your password in the familiar and English layout... This approach can help if you entered data and forgot to switch it. It is also worth trying to log in with Caps Lock enabled. The fact is that for the operating system there is a difference between the words Alyosha and Alyosha. If for some reason you do not understand how to reset the password on Windows 10 or you have other difficulties, there is a video at the end of this article that duplicates what was written.

If your account was synchronized with Microsoft, and the computer is connected to the network, there will be no difficulties with password recovery at all. You can do this right on the Microsoft website. Let's take a closer look at the question: adhere to all stages of our step by step instructions... Getting started:

Visit the password recovery page on the Microsoft official website. To do this, follow the link. We will be asked to indicate the reason why we cannot enter - choose any. We indicate "I forgot my password." Click "Next".

At the next stage, we indicate the email from our account, enter the confirmation number and click on "Next".

A letter with a confirmation code will be sent to the e-mail specified at the previous stage - we will copy it.

Enter the confirmation code into the window shown in the screenshot, and press the key with the text "Next" again.

Enter a new password, confirm it and click on the "Next" button.

That's all. Our password has been changed and we can use it when logging into the operating system. Naturally, in order for it to be updated on your computer, you need to have a working network connection.

Try to constantly link your account to your Microsoft account. Firstly, it will not allow you to forget your authorization data or restore them without problems. Secondly, all your data will be synchronized, and the user folder will be completely saved in cloud OneDrive which Microsoft gives free to all of its users.

How to reset local account password

In order to use this option, you need to have a USB flash drive or disk for installing Windows 10. We discussed how to create it in. Let's move on to the instructions, each step of which will be shown in the screenshot for clarity.

First you need to boot from our media. To do this, you need to Computer BIOS install USB or DVD media as the first bootable device. In order to enter the BIOS, you need to press the Del or F2 button at the time of starting the computer. You can also call the boot menu - for this, each computer or laptop has its own key (see the documentation). When the PC is launched from a flash drive or disk, we need to get to the command line. To do this, click on the "System Restore" item.

Next, go to the "Troubleshooting" section by clicking on the tile indicated in the screenshot.

Select the command line tool.

You can call the command line by pressing the combination Shift keys+ F10 on the language selection screen. However, this option does not always work.

In the command line, type diskpart and press the Enter button.

Now we need to get a list of the partitions mounted on the computer. To do this, enter list volume and press Enter.

A list of sections has appeared. We need to remember the one on which Windows was installed. You can understand this by the size of the disk. In this case, our partition has a volume of 31 GB - this is Volume 2 with the letter D. Let's go further. Exit diskpart by entering the exit command.

We continue to reset the Windows password, write a phrase like: move c: \ windows \ system32 \ utilman.exe and press Enter.

The next line to enter: copy c: \ windows \ system32 \ cmd.exe c: \ windows \ system32 \ utilman.exe and Enter again.

If you followed our steps and entered your disc title correctly, then everything went well. All that remains is to enter the wpeutil reboot command and press Enter again. Next, our PC will reboot, and you will see the beginning of the diagnosis.

This will be followed by the process automatic recovery- in our case it will just reset the password.

Note: the whole procedure described above boiled down to the fact that the cmd.exe file was copied to the System32 directory and received a new name utilman.exe. This will enable you to activate the command prompt without logging into Windows.

When the computer starts up, on the password entry screen, click on the "Accessibility" button - we circled it in a red circle in the screenshot.

The trick is that at the last stage we changed the standard Windows tool 10 to the command line and now the "Ten" launches it, not realizing that this is not the same program. Go ahead. Enter the following statement in CMD.exe: net user your account name new_password and press Enter.

If your login consists of two or more words, you need to enter it in quotes. And if you don't know the login, just enter net users and Windows 10 will show you all the users of the system.

Ready. Now you can log in with a new password without rebooting the system. Do not forget to bring back the accessibility list after windows explorer 10 running as administrator.

Another option is how to remove the password from a Windows 10 computer

To use this method, you need to have installed on your PC Windows version 10 Professional. The described option works with an already running command line. How to call it through the accessibility button - we said above. The algorithm of actions will be as follows:

Launch the command line and enter the following into it: net user Administrator / active: yes (if your Windows is an English release, or it was one, but you Russified it, then instead of “Administrator” enter Administrator). V end we press Enter.

Now you need to restart the PC, after which you will have the choice of the Administrator user, who can log in to the system without entering a password.

Just click on the name "Administrator" and enter the system.

Sometimes a second user appears even before restart windows 10. Therefore, before proceeding with the reboot, take a look at the lower left corner - perhaps the administrator has already been added there.

But we need to change the password, so let's move on. Once you log in (the first time it may take a while), right-click on the "Start" button and select the "Computer Management" menu.

We follow the path indicated in the screenshot. In the right part of the window, click on the name of the user who forgot the password, and select from context menu the item marked in the screenshot with the number 2.

Windows will notify us that changing the password is dangerous (we advise you to read the text in full), but we click "Continue".

It's time to change your password. We enter the code itself, its confirmation and click "OK".

Ready. The password has been changed and now you can enter the system with it.

This option works exclusively with local accounts. If you need to recover the password from your Microsoft account, use the first method or, after logging in, create another user.

After you have made the necessary changes, put everything back. Enter a command prompt and type: net user Administrator / active: no. This will disable the administrator account login without entering a password. Leaving the state of affairs in this state is very dangerous.

Ready. Now your Windows is what it was, and you can safely log in.

New way to sign in

Boot from the installation media and when the language selection window appears, press Shift and F10 at the same time. (On some laptops, you need to add the Fn button to this combination).

The command line will open - which, in fact, we needed and needed. Enter regedit and press Enter. This will launch the Registry Editor. Go to the registry key indicated in the screenshot.

Open the "File" menu and select the "Load bush" item in it.

Open C: \ Windows \ System32 \ config and select SYSTEM.

Note! The disk on your system may be different. For example, in our case it is not C, but D.

Windows will ask for the name of the future parameter. It doesn't matter - write any word in small Latin letters.

Click on the newly created section system registry and select the Setup folder inside it. In the right part of the window, you need to set the parameters for the following keys:

Assign the cmd.exe parameter to the CmdLine key;

We assign parameter 2 to the SetupType key.

We finish with the registry editor. We need to unload the bush. To do this, select the key we have created on the left side of the program.

Through the "File" menu, unload the hive into place.

Confirm the action by clicking on the "Yes" button.

After these manipulations, you need to close regedit and the black command line window. Reboot and when the system starts you will see a command prompt that opens.

Now the user password can be reset by the operator: net user user_password - in the same way as described above. When the changes are made, type exit at the command line and press Enter. If you close the window with a cross, all the changes you made may disappear.

In the future, you will not need to return the system to its original position. Any changes you made while working with the command line will automatically be restored to their default values.

If none of the described options helped you or after a series of experiments the system stopped starting at all, use the mode.

Password reset software

In the vastness of the network, you can find utilities that are supposedly capable of removing the password from a Windows computer. We do not recommend using such software. The fact is that, firstly, it needs to be written to a bootable USB flash drive (and these are additional difficulties), and secondly, utilities work most often by enumerating options and, if the password is of medium complexity, you will not be able to find the correct combination. But most importantly - why is it needed? After all, using our instructions, you will restore in 5-10 minutes forgotten code... Moreover, several options are presented, which will be enough for any situation.

This is where we will end. Now you know how to remove Windows 10 password in several ways. We hope our article helped you, but if you have any difficulties, describe them in the comments, and we, or other users, will help resolve the situation.

Video on How to Reset Forgotten Windows 10 Password

Sometimes you log into the system and realize that the password for the account needs to be reset. Well, you don’t remember a thing. The worst thing happens when you lose your administrator password. It's okay if you're using a Microsoft account and you can request a change by phone or email, but the complexity of using this technique scares people off. And then you have to puzzle over how to reset the password on Windows 10.

You need to restore access through the command line of the installation media. There is no direct way to log in, but there is a workaround. Craftsmen come up with these techniques themselves, but it is possible that some information is also posted on the official Microsoft website. Today we are not going to tell you about how to recover your password. This cannot be done in a normal security system. But it is quite possible to reset the administrator password.

Command line

The principles of working with the command line will come in handy. The fact is that we need the account name and the name of the computer itself. We bet that most of the users of this information do not know. And you can see it from the command line. In combat mode, we will call it from the recovery tool with bootable USB, and now we offer the following action plan:

Win + X to bring up the system menu.
Selecting the desired line (including on behalf of the administrator).

Let's try simple command net user. It shows a list of the names of all users on this computer. So you can overwrite what you need when recovering your password. And at the same time find out the name of the computer. Because the custom one is already present on the command line.

The next step can be to study a specific account. This is done in the following way. Type net user desired_name. A list of available information appears. Note that the computer alias is in capital letters, but in small letters. There really is no difference. You can type in both uppercase and lowercase.

So, for example, we see that the guest account does not have a password, but it is disabled and on this moment unavailable. Finally, from time to time you will need to run the command line as someone else. For example, you have the data of the global system administrator, but you cannot log into this account. But it is quite possible to start the necessary procedure. This is done using the runas command. It will work only if there is a password, when entering Windows, perform the necessary operations. And how to do this will be shown below.

Note that the characters entered will not be displayed when prompted. The impression is that something has gone astray, but this is an erroneous line of thought. The characters are accepted by the system, but not displayed on the screen. Feel free to proceed with your laptop recovery. The runas command syntax can be viewed in the standard way by adding / ?. Here's an example:

the key / user says, on whose behalf the launch occurs;
colon-separated computername \ username;
the name of the program to run.

No spaces in the user key, otherwise the system will not accept the data. An empty password is not allowed. The default application names for the command line are cmd.exe. This concludes the introductory part, links to it will be provided further in the text.

You need to start from the installation media - a flash drive or DVD disc... Set the necessary options in the BIOS, or use the F12 key (sometimes ESC) at startup. The second method is simpler, but it does not work in all cases. In the BOOT section, put the desired media in the first place. This will ensure correct loading. Flash drives often don't fit here, and so you have to use F12 (ESC).

On some computers, as can be seen from the screen, pressing ESC is no different in principle from BIOS. Be careful: you only need to click once. Otherwise, the menu will immediately disappear from view. Compare this screen with the one made from BIOS.

On other computers, things may be different.

Launching media

So, the bootloader priority is set on the computer, and we are 100% ready to reset the Windows 10 password. Note that a module is installed on the disk that requires you to press any key for 5 seconds, otherwise the bootloader will turn on hard disk.

Then the screen for selecting the operating system version will follow, if the media is multiboot. Please note that the 32 bit version of the command line is fine for Windows 64 bit and vice versa. Don't worry, therefore, if there is no suitable version. Start with the existing one.

How to enter command line mode

We did not promise to find out the password from the computer, but you can easily reset your account information. After choosing the version, the traditional windows will appear - the painfully well-known logo. Sometimes it is even difficult to understand where the download is coming from - has the hard drive turned on?

As soon as the first meaningful window appears (usually this is a proposal to select a language and some other settings), press Shift + F10. This will immediately open a Command Prompt window. Without any accounts, the work goes from the carrier. Let's see if his rights are enough to carry out the necessary operations.

The essence of the activities

The idea is taken from Windows Server, but it turned out that it works on the top ten too. We will now change the Ease of Access Center applet to the command line. Therefore, when starting later, instead of asking for a password, we will have a command line, from where it will be possible (see above) to do all the necessary operations. That is, to administer and then log in, a new password is set on Windows 10. Compliant with domain requirements, if any. Let's get started.

Commands

We type the operation of changing the name of the applet to a neutral copy: move D: \ Windows \ System32 \ utilman.exe D: \ Windows \ System32 \ utilman.backup. The executable file has become a harmless ballast for the hard drive. Be careful, when moving, use the letter of the system drive.

The screenshot shows the complete sequence of actions, which we will not describe in the text. After the performed operation, you need to replace the utilman.exe utility with its imitation in the form of launching the command line. To do this, type the following text: copy C: \ Windows \ System32 \ cmd.exe C: \ Windows \ System32 \ utilman.exe. There is no point in illustrating this, just type and execute. Type exit or close Command Prompt and restart. You can remove the distribution media, it will not be useful for now.

Working from hard drive

After the reboot, a window will appear prompting you to log in, but we instead click on the lower left corner where the button with the Accessibility circle is located. Our command line appears, from which we will proceed further.