Phone software is not installed. General guidelines for installing drivers for most Android devices

Sometimes when trying to use a USB flash drive, mouse or any other gadget that connects when USB help, an error occurs; the device cannot be started with Code 10.

In some cases, to see it, you need to go to the "Dispatcher" and, again, open in the section « Network adapters» ... This is done using a search.

Let's consider all the methods that can help in solving this error.

Cobsession:

Method number 1. Restart

Often they help to solve the problem to the point of impossibility simple ways, and more specifically:

• Remove a USB flash drive or other device from USB port and reinsert it. Often, minor system conflicts prevent the drive from being freely identified by the PC. This is especially true for other operating systems older than the G8.
• Insert the storage medium into a different port. It also happens that this particular port has stopped working correctly. This does not necessarily mean that there is any serious problem with it. This happens. After a while, try using that port again.

Of course, it is best if this procedure is successful and they are found on the Internet.

In this case, you just have to follow the instructions of the installer to launch them and continue to use your own, and so on.

If you cannot find them, you will need to do it yourself.

"But where can I find them?"

They are usually stored on the servers of your hardware manufacturer. You can find them on the official websites.

When they are found, in the window shown in Figure 4, select the second option, "Search for drivers on this computer"... If the downloaded files are suitable, they will be installed.

Method number 3. Working with the registry

Also, sometimes situations arise when some residual or simply incorrectly working files do not allow it to start normally.

In that case, the best thing is. The easiest way to do this is with the CCleaner program.

Step by step this process as follows:

• Download and install CCleaner (link) on your PC or laptop. Start it up. Click on the "Registry" tab on the left.
• Place a checkmark wherever possible, in the box "Integrity of the registry".
• Click the Troubleshoot button. This process will start. It will take a little time for it to end.
• Click on the "Fix ..." button - then it will already become available.

You can complete this task with the help of a large number of others. good programs... For example, there is Advanced SystemCare. Its use even simpler:

1 Download and install Advanced SystemCare (link) on your PC. Start it up. Go to the tab Cleaning and optimization up.

2 At the bottom, check the box next to Cleaning the registry.

3 Press the button Start in the middle. Cleaning starts. It usually doesn't take long either.

Method number 4. Renaming a flash drive

If we are talking about, it is likely that the system is simply already registered with the same name. Because of this, of course, a conflict arises.

Therefore, it is logical that it is desirable to change the letter. This is done as follows:

1. Go to "Control Panel" and choose there "Administration".

Clue: If this section is not visible, install "Small icons" in the upper right corner. Then everything will fall into place.

1. In the window that opens, select "Computer Management"... To open this program, you need to click on it twice.

"Computer Management" in the "Administration" section

1. In the menu on the left, click "Disk Management"... On your USB stick, which is not detected, right-click. In the dropdown menu, click "Change letter ...".

1. In the new window, you need to click the "Change ..." button again.
2. Then it remains to select the desired letter near the inscription "Assign drive letter (A-Z)" and click "OK".

After that, remove it from the PC and reinsert it. Everything should work well.

If all else fails, write in the comments about it.

Sometimes it also helps to disable the antivirus before. This is discussed in the video below.

Good day to everyone and other differences, dear friends, acquaintances, readers, admirers and other personalities.

Windows 10 never ceases to delight us with updates and regular problems along with them, then the ears ache, then the tail falls off, then Intel driver crashes and dumps the problem "" for everyone and everything, then the cameras on the laptops will fall off, then an error appears, then something else.

This time, many faced the problem stated in the title, namely the error 0x800f0217 and / or the fact that the connected phone / player / other USB-the device simply refuses to be detected or to work normally (for colleagues, for example, it simply "blinked" in the conductor).

Today I will briefly tell you how, in fact, to treat it.
Go.

We treat USB device detection in Windows 10 and error 0x800f0217 when updating

Actually, the problem is traditionally for Miscrosoft, in the driver MTP... Moreover, at first she breaks it, then she cannot update and spits in her own updater with the aforementioned problem 0x800f0217(screenshot is clickable):

It is treated with pens, namely, to begin with, in fact, we go to the control panel (for which we enter the phrase "Control Panel" in the explorer):

In the device manager, most likely, you will have an unknown device and / or the name of your phone / player / something (whichever is connected) with exclamation mark or unknown USB-device:

Actually, we poke at it a couple of times with the mouse button, after which we select the item " Update driver", where, in the next step, select the item" Search for drivers on this computer":

After that, in the list that appears, we will need to select the section " Mobile devices"followed by" MTP USB device":

After that, the phone / player or whatever you have, in fact, should appear in the list of devices (and in the explorer Windows) under its own name:

Well, or just like a connected disk / flash drive (depending on what the problem was).

By the way, again, depending on what the problem was, at the stage where we chose " Mobile devices"you can select items like" USB controllers" or " USB function controllers" or " / iPhone device"and so on, how to treat problems of a similar type of system with other devices (or all the same, in case the described option did not help).

So it goes.

Afterword

In a nutshell, it’s like this. We hope that the article will be useful to someone someday and will save invaluable time, as well as equally invaluable nerves. By the way, whatever one may say, but dozens of updates really benefit her, despite the endless glitches with the drivers.

As always, if you have any questions, thoughts, additions and all that stuff, then welcome to the comments on this post.

Hello everyone, dear readers and smartphone users. Today I will tell you what to do if, when you connect your smartphone to personal computer the error “USB device MTP denial”. Below you can see a screenshot of this error. If you have the same problem, then read on.

The error “USB device MTP failure” can occur for several reasons, here are some of them:

1. A problem with MTP driver... This happens sometimes, but not on all computers. This problem it can be eliminated very simply and quickly, below I will describe it in more detail;
2. Incorrect settings in the device itself. As practice shows, such a reason occurs in 1% of cases, but nevertheless, it is possible for you that it is the cause of the error;
3. Outdated drivers. This problem also takes place, but, like the previous ones, this cause of the error can be eliminated by simply updating the driver for your operating system.

So, we have sorted out the reasons, now let's get down to fixing this problem. Let's start in order, with the most working and common method to eliminate an unpleasant error.

Method 1

Now reconnect your mobile device to your personal computer and check if the error that occurred earlier has disappeared.

Method 2

If the previous method did not help, then let's try to delve into the settings of the mobile device... Follow these steps:

Important: if the development item is not visible, then do the following: go to the "About the device" section and click on the build number about 10 times. Thus, you activate the item "Development".

Method 3

As I said above, this way as simple and straightforward as the previous ones. It consists in a banal driver update... In order for everything to go as smoothly as possible, follow these steps:

Now try to reconnect your mobile android gadget to a personal computer and check if it disappeared USB error.

If the article was useful to you, then you can thank the author of the article by publishing a link to this material in your accounts. social networks, to do this, click one of the share buttons below. Do not forget to add this resource to your bookmarks, I think it will be useful to you more than once during the operation of your Android device. See you in the following, undoubtedly, useful materials.

Samsung Electronics announced the start of mass production of the first stereoscopic flash memory chips in the market called 3D Vertical NAND (V-NAND). Chips designed to replace traditional solutions NAND, developed in a completely new technology and will soon be introduced into a number of devices (household electronic devices, embedded systems and storage, as well as in solid state drives SSD). According to the manufacturer, the new items will be able to provide unprecedented performance due to the higher cell density.

Philips will soon introduce the BDM4037UW 40-inch widescreen monitor. The novelty is different curved screen(angle of curvature - 3000R) and Ultra resolution HD (3840x2160). The model is based on the VA / TPV matrix, which provides wide viewing angles (178/178 degrees) and fast response - 4 ms.

The Philips BDM4037UW monitor is characterized by a high contrast ratio: 4000: 1 (static) and 20M: 1 (dynamic). The maximum screen brightness is 300 cd / m2. One of the features of the model is support for picture-in-picture and picture-by-picture display modes. On the …

Digital Storm has expanded its assortment with new gaming computer Virtue, which supports Intel's recently released Haswell platform. This model- an attempt by the developers to present a worthy alternative to standard tower systems on the market. According to Digital Storm, the Virtue is original in design and offers exclusive upgrade options that most competing PCs cannot.

Despite its modest dimensions (17.7x8.3x17.3 inches), the PC case is ready to take on board full-size graphics adapters and a whole block ...

Old Android devices support massive USB memory to transfer files to and from your computer. Modern Android devices use the MTP and PTP protocols - you can choose either of the two.

To select a protocol USB connection, open the Settings app, tap Storage, then the menu button and select USB connection with a computer. When the device is connected to a computer via USB, the protocol it uses is shown in the notification.

Why modern Android devices don't support USB mass storage

USB mass storage - also known as the “USB mass storage class” - is a method by which older Android version gave the computer access to their memory. When connecting an Android device to a computer, I had to press the “Connect memory to computer” button to make the device memory

Android has become available to the computer via USB mass storage. When disconnecting from the computer, you had to click the "Disconnect USB Memory" button.

USB mass storage is a standard protocol used by flash drives, external hard drives, SD cards, and other USB storage devices. The drive becomes full accessible to the computer, exactly like the inner disc.

This scheme of work had drawbacks. A device connecting to memory required exclusive access to it. The memory was disconnected from the operating room when connected to a computer Android systems... Files and applications stored on a memory card or USB storage device became unavailable when connected to a computer.

System files need to be stored somewhere; they cannot be disconnected from the device, so Android devices contain a separate / data section for “system memory” and a / sdcard section for “USB memory” on the same internal storage... Android installs apps and system files in / data, while user data is stored in the / sdcard partition.

Hard partitioning resulted in not enough space for applications and too much space for data. It is impossible to resize partitions without obtaining superuser rights on the device - the manufacturer chooses the size for each partition at the factory.

Since the file system had to be accessed from Windows computer, it was formatted with FAT. Microsoft owns patents on FAT, which is an older and slower file system without modern system permissions. in currently Android uses a new file system ext4 for all partitions because Windows doesn't have to read them directly.

Phone connection or Android tablet to the computer as a standard USB storage device convenient, but it has too many flaws, so newer Android devices use different USB connection protocols.

MTP - storage device

MTP stands for Data Transfer Protocol. Android when using this protocol appears to the computer as a "storage device". The data transfer protocol has been promoted as a standardized protocol for transferring audio files to digital music players with using Windows Media Player and similar programs... He had to let other media companies compete with Apple iPod and iTunes.

This protocol is very different from USB mass storage. Instead of exposing the file system of an Android device to Windows, MTP works at the file level. Android device does not provide all of its memory to Windows. Instead, the computer sends a request to the connected device, and it responds with a list of files and directories. The computer can download the file by requesting it from the device, which will send the file over the connection. If the computer sends a file to the device, the device saves it. When a file is deleted, the computer signals the device to delete the file, which the device does.

Android chooses which files to show and hide system files so they cannot be seen or changed. If you try to delete or edit an unmodifiable file, the device rejects the request and displays an error message.

The computer does not need exclusive access to the drive, so there is no need to connect memory, disconnect it, or have separate partitions under different types data. Android can use ext4 or any other file system. Windows is not required to understand the Android file system.

In fact, MTP works very similarly to USB mass storage. For example, an MTP device is shown in Explorer so that files can be viewed and transferred. Linux also supports MTP through libmtp, which is bundled with popular Linux distributions. MTP devices are also displayed in the Linux file manager.

Apple Mac OS X does not support MTP at all. iPods, iPads, and iPhones all use their own proprietary sync protocol with iTunes, so why should they support a competing protocol?

Google provides an application to transfer Android files for Mac OS X. It is an MTP client and transfers files to Mac. Google does not supply this app to others operating systems because they have MTP support.

PTP - digital camera

PTP stands for Picture Transfer Protocol. With this protocol, Android appears to the computer as a digital camera.

MTP is based on PTP but adds additional features... PTP functions like MTP and is used by digital cameras. Any program that captures photos from digital cameras, is able to extract them from Android phone if PTP mode is selected. PTP serves as a standard protocol for communicating with digital cameras.

In this mode, the Android device will run digital camera apps that support PTP but not MTP. Mac OS X supports PTP, so you can use it to transfer photos from your Android device to your Mac via USB without any special software.

In the case of an old Android device, you will have to use USB mass storage. New devices allow you to choose between MTP and PTP -PTP is needed for programs that only support it.

If your device has a removable memory card, you can remove it and insert it directly into your computer's memory card slot. The memory card will appear to the computer under the guise of a drive, which means that it will be possible to access all the files on it, run the file recovery software and do everything else that MTP does not allow.