Login to the modem tp link. Logging into your TP-Link router's personal account

TP-Link routers have a fairly versatile control panel. Therefore, for all models of this router, one way is relevant to get into the settings.

Step 1. The first thing to do is to connect the router to the mains and to the computer. It connects to the computer either through network cable, or via Wi-Fi.

1. To connect via Wi-Fi, just turn on the router and find through the computer new network... If the device is new, the network will have a default name starting with "TP-Link".
2. Alternative option: connect the special cable that comes with the device to the network card of the computer and to the router through the yellow LAN connector.

The note! It is advisable to connect via a network cable. But if you just want to set a password and basic parameters, you can also connect via Wi-Fi.

Step 2. We launch any browser. In it, you need to go to the IP address of the router. It is indicated on a special sticker, which is usually glued to the bottom cover of the router. As a rule, for routers of this type, this is 192.168.1.1 or 192.168.0.1. Also, the initial username and password are indicated on the sticker.

Step 3. After navigating to the IP of the router, a dialog box pops up asking you to enter your username and password. In the vast majority of cases, these are preset "admin", which are indicated on the sticker after the IP address.

Note! But if the router is not new and the data has changed on it before, then you will have to remember and enter new login data. If you do not remember them, you will have to reset

Enter your username and password in the dialog box and click on the "Login" button.

Step 4. If you have followed all the previous steps correctly, the control panel will open. This is where all the possible settings for the router are located. Depending on the model, there are two options for the control panel interface.

Option 1.

Option 2.

The note! Both interfaces contain all available functionality... The only difference is in appearance.

Problems accessing router settings

Sometimes, after entering the IP address, the browser gives an error. The error text may differ depending on the browser used. There may be several reasons for this:

Most often, such problems occur because of little things. Therefore, before doing any major reconfigurations, try the following:

• repeat the operation using a different browser to connect;
• try another device. If you don't have another computer or laptop, you can even use a tablet or phone;
• check the connection of the router to the mains and the serviceability of its power supply;
• try disabling any programs that might be interfering with your connection. For example antivirus or firewall.

Also, often the reason lies in a very simple mistake: the network cable is often connected to the blue connector. This is the WAN port for the internet cable. The network cable, in turn, must be connected to the yellow LAN connector.

It is also worth checking the connection settings of the IP address. This can be done by going from the laptop to the properties of the connection you are connected to. There you need to make sure that the automatic obtaining of IP and DNS is set.

How do I reset the router settings?

If you need to return the router to factory settings, you do not need to connect to it via a network cable. The use of a computer is not required here in principle. We just take a router and find a hole on it with the inscription "Reset". Inside it is the reset button.

Advice! To press it, you have to get into the hole with something thin. Usually a needle or pin is used for this.

It's not difficult at all. So there is no need to call the wizard every time you need to change the settings.

Video - How to enter a TP link router

The TP-Link TL-WR841N router is one of the most popular router models, which has proven itself from the best side and, as a result, is consistently in high demand among many users. In this article, we will take a closer look at the procedure for connecting and configuring the router, including, we will tell you in detail about configuring the wireless Wi-Fi networks.

Brief specifications TP-Link TL-WR841N

Characteristic	Meaning
Type of	Wi-Fi router
Wireless standard	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency range	2400-2483.5 MHz
Max. wireless speed	300 Mbps
Antenna	2 x 5 dBi
Wireless signal strength	20 dBm
Wireless Security	WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Ports	4xLAN 100 Mbps, 1xWAN 100 Mbps
VPN pass-through	PPTP, L2TP, IPSec (ESP Head)
DHCP server	there is
Dynamic DNS	DynDns, Comexe, NO-IP
Firewall (FireWall)	there is
NAT	there is
QoS (data prioritization)	WMM, Bandwidth Control
WDS Bridge	there is
Dimensions (WxDxH)	192 x 130 x 33 mm

How to connect a router

The delivery set of the router includes:

• Router TL-WR841N;
• Power adapter;
• Ethernet cable with RJ-45 connectors;
• CD for quick setup;
• Management.

We unpack the box and proceed with the installation and connection of the router. First, we connect the device to power using the adapter and press the Power button on the back panel (if the indicators on the router light up themselves after power is applied, then you do not need to press the button).

Next, using the included Ethernet cable, we connect the router and computer. We plug one end of the cable into one of the four yellow LAN ports of the router, and the other into the connector network card PC. Then we connect the cable coming from the Internet provider or ADSL modem to the blue WAN connector of the router.

In principle, that's all, now you can proceed directly to configuring the router, but first let us make a reservation that it comes with a CD with a utility that allows you to make quick setup router in step by step... We will not consider this method, because the configuration option via the web interface is preferable.

Basic configuration of the TP-Link TL-WR841N router

Since the router will now be responsible for connecting to the Internet and distributing it, the need for the previously created in Windows high speed connection no. At the same time, connecting via local network connecting your computer and router needs to be configured. Go to Control Panel - Network Control Center and general access- Change adapter settings... Right-click on active connection and select the item "Properties".

On the “Network” tab, set the switches to “Obtain an IP address automatically” and “Obtain a DNS server address automatically”.

Also in position automatic tuning put the switch on the "Alternative configuration" tab. We save the changes with the "OK" button.

Now we launch any browser and write in the address bar http://tplinklogin.net/ or 192.168.0.1 ... Then, in the window that opens, enter the username and password - by default, this is admin and admin.

The default username and password can be found on a label on the bottom of the router. Look at it and make sure again that all the login information for the web interface is TP-Link settings TL-WR841N entered correctly.

If everything is done correctly, you will be taken to the administration panel. Here we immediately go to the Internet settings.

Internet setup (WAN)

Select "Network" from the menu on the left (in the English-language interface - Network), and then the WAN section. In the drop-down list "WAN Connection Type" select required type connection to the provider.

There are the following options:

• Dynamic IP address;
• Static IP address;
• PPPoE;
• L2TP;
• PPTP.

It makes no sense for you to delve into the essence of all these types of connection. Information about which one to choose is provided by the provider. Also, the Internet service provider transmits authorization data to the client - username and password. If you suddenly forgot these data, then they can be spied on in the contract. The second option is to call the provider's support service.

So, we set up a WAN connection according to the following schemes:

• When choosing dynamic IP no additional action is required;
• Option Static IP address provides for the entry of the IP address, subnet mask, gateway and DNS. We remind you that all this data is provided by the service provider, i.e. your provider.
• Connection type PPPoE requires a username and password.
• When choosing a connection L2TP the username, password and IP-address / Name of the VPN server are specified.
• Connection type PPTP It will also ask you to enter a username, password and IP address / VPN server name.

After all the data has been entered, we press the “Save” button. The Internet should work.

After configuring the Wi-Fi router TP-Link TL-WR841N, there is no Internet access

In case you set everything up clearly according to the instructions, but as a result the Internet does not work, you need to do the following:

If none of the above steps help, the router might be malfunctioning. To make sure the device is working, try connecting it with friends or acquaintances.

Wi-Fi setup

Providing opportunity wireless connection to the Internet is one of the most important functions of a router. Let's move on to the Wi-Fi settings for TP-Link TL-WR841N.

We go to the section Wireless Mode - Settings wireless mode (Wireless - Wireless Settings). We set the name of our Wi-Fi network and select the region.

Below are network settings that, in certain situations, can affect signal quality and coverage. We will not focus on them, since this is a topic for another big conversation. Leave all parameters at their default values ​​and save the settings.

Now we need to protect our wireless network from unauthorized connection of third-party users. Select the item "Wireless Security" on the left.

Set the switch to "WPA / WPA2 - Personal (recommended)". Next, select the version, encryption type and set the password. We save the made changes.

Setting a new administrator password

The standard username and password for accessing administrative settings makes your TP-Link TL-WR841N router very vulnerable, so it is better to change them immediately. We go along the way System Tools - Password (System Tools - Password). Here we enter the old and new data for authorization (you can only change the password, and leave the username admin), and then click “Save”.

You can write down the password somewhere so as not to forget.

Perhaps on this basic setup Wi-Fi router TP-Link TL-WR841N completed. Of course, there are many more functions that can be useful to users. However, this will be a more subtle configuration that requires a separate article. We achieved the main goal - set up the Internet and Wi-Fi.

For all settings to take effect, we restart the router. It can be done programmatically through the section ( System Tools - Reboot) or physically by turning off the power. After downloading, a Wi-Fi network with the specified name should appear, to connect to which you will need to enter a password. The Internet must work in both "wired" and wireless modes.

A standard question asked by novice users is how to enter the settings TP-Link router which they try to connect and configure on their own. Their main mistake is that they consider a router peripheral device computer and it should appear in Device Manager. This is a wrong judgment.

The fact is that a modern WiFi router is a separate network device with its own processor, memory and operating system... Accordingly, go to the TP-Link router settings through the dispatcher Windows devices will not work out unambiguously. In fact, everything is quite simple here. You just need to follow the steps below.

How to find out the IP address of the router

The first step to start with is to find out what IP address your TP-Link router has. To do this, it is usually enough just to turn it upside down and see what is written in the sticker:

As you can see in the example above, the IP address of the router in the local network is 192.168.1.1 ... Sometimes, on some models of TP-Link routers, IP is used.

Recently on modern models TP-Link routers, instead of the IP address, the Domain name devices in the network.

Usually this tplinkwifi.net, tplinklogin.net or tplinkmodem.net... This is very confusing for beginners, since they believe that this is the address of the manufacturer's official website. But in fact, this is the domain name of the Wi-Fi router TP-Link, which is made specifically to make life easier for the user due to the fact that even the same model of modem or router, but with different firmware, may have different IP addresses.

Note: Pay attention to the content of the fields Username and Password... This data will also come in handy if you need to enter the settings of your TP-Link router. After configuration, it will be desirable to change the password to a more complex one in order to ensure security.

Accessing TP-Link router settings

We learned the address of the device in the local network. We also know the login and password for access to the web configurator. Now, in order to enter the settings of the TP-Link router, you must first connect it with a cable to your computer or laptop. You can, of course, connect via WiFi, but for this you need to know the password from Wai-Fai.

Then launch your web browser Internet Explorer, Microsoft Edge or Google chrome and in the address bar enter the IP-address of the TP-Link router, which is indicated on the sticker:

Accordingly, if the label contains a domain name tplinkwifi.net or tplinklogin.net- you can write it in the address bar:

If you have problems accessing the settings TP-Link router no, then the next step will appear a window for authorization, where you need to enter the login and password to enter the web interface.

If the TP-Link router is configured for the first time after purchase or after the reset with the reset button, then enter the password from the sticker (usually this admin).

On the most modern models, after that, an automatic request will appear to change the factory password "admin" to another, more complex one:

In the future, be sure to take into account the fact that the factory password has been changed and using it you will not be able to enter the router settings interface.

Configuring a TP-Link router via your phone

If necessary, you can go to the TP-Link router settings with mobile phone or a tablet connected to it via WiFi. Everything is done in the same way as on a regular PC: we launch a web browser and enter the address of the router. The same web interface will open, but in a mobile layout, focused on a small screen.

Another very handy tool to configure your TP-Link router via phone and tablet - this is an application TP-Link Tether... It is available in stores Android applications and Apple iOS.

Application for Wi-Fi routers TP-Link Tether provides a simple and intuitive user interface designed for diminutiveness mobile device... Despite this, it provides the same options for configuring the router as a full-fledged web interface. Moreover, due to the built-in support for DLNA technology, the application allows you to watch videos on your smartphone and listen to music from a flash drive or portable disk connected to the router.

Among the interesting features of the Tether program is an interactive customer map, where you can find out who is connected to the router and from what devices.
If you have several TP-Link modems or routers in your network, you can create a separate profile for each of them. Moreover, almost all modern models are supported.

When changing the password, if you need to log in to the wireless, Wi-Fi, network, or in order to see it, you need the router settings. In this article, we will show you how to enter the configuration settings using examples of several of the most famous routers.
Also, using the control panel of the router, you can make a whole range of settings: from renaming the access point to the parameters and status of the wireless Internet connection.

Routers TP-Link

The routers of the Chinese company TP-Link have similar settings, so the guide that you will see below is universal. If you have one of these router models, go to the settings by following five steps in sequence:

D-Link routers

Routers from the global manufacturer of network equipment, the Chinese company D-Link, are easy to set up. Therefore, these routers are so popular and in demand for home use. Also, devices of this brand are available with support for several communication methods. So, to configure a router from D-Link, use one of two methods:

Method 1 Find the disc in the box with the router and follow the instructions.

Method 2 Use the router settings panel.

To launch the settings panel D-Link router you need a working browser. Open it and follow four steps in sequence:

Routers Asus

Network equipment from Asus is popular, and wireless routers are characterized by high performance and reasonable prices. Routers developed by this Chinese manufacturer are recommended to be connected directly to the computer, unlike others that connect via wireless, Wi-Fi, connection.

How to connect an Asus router directly to a computer is shown in the diagram:

WAN - provider's network cable, it is marked in yellow. The router is connected to personal computer using the LAN port.

After connecting router Asus with a computer, you need to configure the network so that it receives an IP address in automatic mode... All settings are made in the network control center. Go into it and click on the network that belongs to the router. You will see a window for setting the properties of the TCP / IP protocols.

In this window, and you need to check the corresponding checkbox, which makes it possible to receive the address automatically, upon connection.

Launch the browser you are using for surfing and in search bar write your local address. A window will open where you need to specify your login and password for authorization. For routers from Asus login and the password is admin.

Do not launch the router settings panel until you have connected the router to your computer. If the two devices are not connected, you will not get permission to enter the control panel. You will see a browser notification about the impossibility of connecting to the remote server.

Routers Zyxel Keenetic

The Taiwanese company ZyXEL is a renowned manufacturer of network equipment in the world. According to the technical parameters of routers Zyxel Keenetic there are no equal, but the price of these devices corresponds. In order for the router to work as expected, it must be configured correctly. And all settings are carried out in the device control panel.

Follow the three steps below in sequence:

Routers Rostelecom

Routers are produced under the Rostelecom brand, a domestic telecommunications company. They are produced by well-known companies, for example, one of them is Sagemcom. This company produces for the domestic market most (almost 82%) of routers under the Rostelecom brand. If you have such a device, you can enter its settings by following three consecutive steps:

If you cannot connect to the web address of your router

If you entered the local address of the router, for example, 192.168.1.1, but the control panel did not open, and the browser issued a warning that the server was unavailable, the device needs additional configuration.

You were unable to connect for two reasons:

Connect two devices - a computer and a router - correctly, go to the PC taskbar and select the active connections window:

The PC and router must be connected to each other. If you see the status "No internet connection", you need the correct settings. Follow six consecutive steps:

Finding the IP address of the router

In most cases, the router settings panel is available at two addresses: 192.168.0.1 or 192.168.1.1. The router and computer are connected correctly, the Internet is there, but the router's settings panel does not appear. The reason may be that the device has a different web address. Go to the connection parameters to see it.

To do this, open the Network and Sharing Center. Find the LAN connection icon. Look at her "State" by clicking with the mouse.

A window with "Details" will open. It contains information about the network connection. You need the item "Default gateway IP". Copy the numbers and type in the address bar, then press Enter.

Setting the connection address manually

Your network may not be able to get the address automatically. Obtaining IP can be configured in manual mode... Go to Internet Protocol 4 (TCP / IPv4) Properties.

Uncheck the box automatic receipt IP addresses, DNS servers and configure in manual mode by checking two items: "Use IP address", "Use DNS server"

If you have a TP-Link router, enter the following information:

If you have a router from Asus or Rostelecom, enter these details:

Resetting the router settings

Can't log in to your browser because you forgot the password for the router's settings panel? The only way out of the situation is to return the device to its previous factory settings.

When resetting the settings, all parameters will be by default, which means that you can use the standard password for authorization. This password is listed on the router itself or in the manual.

Resetting your settings is easy. There is a special button on the back of the router. Use a suitable object to click on it. The clamping time is about 9-14 seconds.

Immediately after you release the button, everything custom settings will be deleted. Now open your browser, specify the address of the router and log in with standard data. We showed you all the ways with which you can open the router settings panel and change its parameters as needed.

To change the password for authorization in wifi networks or see already set password you need to know how to enter the settings of the router. Also, through the control panel, you can configure the name of the access point, network parameters, connection status and other settings.

TP-Link router

All tp link routers have a similar configuration, so this manual is suitable for all device models. Accessing the configuration settings is easy enough.

Follow the instructions:

• First you need to connect your computer to the router via a Wi-Fi network;
• Once the connection is established, check if the Internet is working - this is an indicator that the router is working as usual;
• Use any browser installed on your computer. V address bar enter the address 192.168.0.1 or 192.168.0.1. The address for accessing the system control panel of the router is indicated on the bottom panel of the router. After entering the local address in the address bar, press the Enter key. The following window will appear:

Router control login window

• In the window, you must enter your username and password to enter. As a rule, these are admin and admin. If this combination does not work, check the bottom panel of the router or the user manual. The login information must be indicated there;
• After entering the username and password, the control panel will appear. It looks like this:

Control panel appearance

D-Link router

D link routers are one of the most popular routers on the market today. Their feature lies in the ease of customization. This makes them great for home use. Also, the router can support several communication methods at once. There are two ways to configure your device:

• Using the disc that comes with the product;
• Going to the configuration settings panel.

To enter the settings panel, launch any browser installed on your PC and follow the instructions below:

• Enter IP168.0.1 in the address bar - d link routers are connected only to this address;
• Press Enter;
• In the window that opens, enter your authorization data. By default, the password is 1234 and the login is admin. This data may change if you purchased the router directly from the provider;

• The control panel looks like this:

Router settings panel

Asus router

Asus routers are fast and affordable. It is better to connect these types of routers directly to the computer before setting up, and not connect using a Wi-Fi connection.

The connection diagram is shown in the figure below:

Scheme of connecting an Asus router to a computer

The WAN Internet cable is shown in yellow, LAN is the port through which the connection to a personal computer is made. After the router is connected to the computer, it will be necessary to set the automatic receipt of the address on the PC in the network settings. Go to the Network Control Center, click on the router's network and open the Internet Protocol Properties window. Set up automatic IP acquisition.

Setting up automatic IP acquisition

Now open your default browser on your computer. In the search bar, enter the address 192.168.1.1 and in the dialog box that opens, enter the name of the network administrator and the password to access it. For Asus devices these are admin and admin.

After completing these steps, a window for managing the configuration of the router will open:

Asus router settings window

Remember! It is necessary to connect to the settings panel after connecting the router to the computer. Otherwise, when trying to access viawifi, you may get a message that the browser was unable to connect to the remote server.

Zyxel Keenetic router

A feature of the Zyxel Keenetic series of routers lies in their powerful technical characteristics... Thanks to them, the router has a wide range of action. However, these routers are quite expensive. Their price varies from 1,500 to 5,000 rubles.

For the device to work correctly, you need to configure its operation using the router's control panel.

Follow the instructions:

1. First, make sure the router's firmware is updated to latest version... The current installed version can be viewed on the bottom panel of the device. The new software will help the user to avoid problems during configuration and further operation of the device. Download current version firmware is available from the official website of the router manufacturer;
2. In the address line of the browser, enter the address 192.168.0.1 and click on Enter;
3. In the window, enter your username and password to log in as the administrator of the router and gain access to all information and settings. Password - 1234, login - admin. Remember, case matters.

Zyxel Keenetic router control panel

Routers Rostelecom

The Rostelecom company has been providing its users with its own branded routers for several years. As a rule, they are produced by well-known manufacturers on the market: D Link, QTech, Sagemcom or Huawei. More than 80% of routers for the Russian company are manufactured by the manufacturer Sagemcom. Let's take a closer look at how to enter the settings of such a router:

1. Connect your computer to the router via Wi-Fi;
2. In the browser, enter the address of the web interface of the router 192.168.1.1 and click on Enter;
3. In the pop-up window, enter the password - admin or login - admin. If these data do not fit, try logging in using your login superadmin and password [email protected] ... This will log you into the control panel as the superuser.

Rostelecom Routers settings panel

If you cannot connect to the web address of your router

If, after entering the IP address 192.168.1.1 or 192.168.0.1, the browser window shown in the figure appears, this indicates that it is necessary to perform additional customization router.

Unsuccessful attempt to connect to the router's web address

There are two possible reasons connection errors:

• The router is not properly connected to the computer (in the case when the connection is not made through Wi-Fi, but through the ports of the computer and the router);

The correct diagram for connecting the router to the computer is shown in the figure above. The actual connection to a computer or laptop will look like this:

Router connected to a laptop using a network cable

If everything is connected correctly, one of the indicators on the router will light up, which is responsible for the operation of the LAN port.

The operation of the indicator responsible for the LAN port

• Another reason for the connection error of the web address is that the wrong settings networks.

After correct connection open the current connections window on the PC taskbar:

Current connections window in Windows OS

The computer must be connected to a router. If the connection status is set as "No Internet access", you need to configure the network.

To do this, follow the instructions:

• Go to the Network and Sharing Center. To do this, right-click on the current connections icon and select the appropriate menu item, as shown in the figure below:

Opening the Control Center for Connected Networks on a PC

• Go to the window for changing the parameters of the network adapter;
• Select the local area connection icon and open its properties window;

Opening LAN Properties

• In the list, select the version 4 network connection protocol and select its properties;
• In the window that opens, check the boxes next to the options for obtaining IP and DNS addresses, as shown in the figure;

Setting up the connection protocol

• Save all changes and try to enter the router's settings panel again (using a browser).

Finding the IP address of the router

In ninety percent of cases, you can enter the router settings at 192.168.1.1 or 192.168.0.1. If you've spent everything required settings and the Internet connection appeared on the PC, but it cannot connect to the router settings panel, perhaps your router uses a special web address. In this case, you need to look at the required IP in the connection parameters on the user's computer.

Go to the Network and Sharing Center. Now find the icon for the connection using your local network. Click on it with the right mouse button and select "State". In the window that opens, click on the "Details" button. Will appear Additional Information about network connection. Find the field "Default gateway IP", its value - this is the address that you need to enter into the address bar of the browser.

IP gateway check

Setting the connection address manually

The network may not support the ability to automatically configure IP addresses. In this case, you need to configure the network parameters yourself. Go to the connection protocol settings window (Figure 17). Instead of automatic configuration, check the "Use the following IP address" and "Use the following DNS server" checkboxes.

For tp-link routers enter the following parameters:

Manual configuration of connection parameters for a tp link router

Users of routers from the manufacturer D Link must enter the following parameters to establish a connection:

Organization manual setting networks for D Link routers

Resetting authorization data

If you cannot remember the previously changed username and / or password at the stage of authorization in the browser, the only way to solve the problem is to reset the router settings. All parameters will be returned to the original (factory) configuration and the access password will become the default. It is indicated in the user manual or on the bottom cover of the router.

The reset process is very simple. There is a reset button on the rear panel of the router, you need to hold it down with any sharp object for 10-15 seconds. After clicking, all settings will be returned to the factory settings, and you can enter the router control panel using a standard username and password.

Button to return to the standard parameters of the router

Using all the methods described in this article, you can quickly log into the control panel of the router to further configure it.

Viewed: 4 087