the main / Multimedia / The disc is constantly working per 100. ❺ Hard disk temperature analysis

The disc is constantly working per 100. ❺ Analysis of the hard disk temperature

One of the most difficult issues to solve Windows 10 / 8.1 is when he suddenly ceases to respond to requests or reacts slowly. There may be many reasons, but the most casual, it's when the disk is loaded by 100 percent in the Task Manager. Many began to pay attention to persistent workload hard disk after windows updates 7 to 8.1 and 10.

In this manual, consider step by step various solutions to eliminate the specified problem after studying and implementing the methods described by others, as well as your own experiments. Many forums and sites have mention of such methods, how to disable the Superfetch, Prefetch services and service bits, but I will not recommend the same thing. I mean, you can actually turn off to solve the problem with 100% hard disk loading.

Methods solution when the disc is loaded by 100 percent in Windows 10 / 8.1

1. Windows update can lead to high hard disk loading. Just close all programs and wait for Windows to install updates, after which you restart the computer.

2. Using the control panel, delete all browsers except EDGE and Internet Explorer.. It isolates the problem with plugins (browser extensions). Another proposal is to remove plugins on one of each browser and check. Adobe Flash. and shockwave player ordinary load perpetrators on hDD . Knowing the fact that browsers can be re-installed in a matter of seconds, then delete the "Temp" folder by typing the conductor string (my computer) % Temp%.Clean the folder Prefetch. (pre-loading files) on the way C: \\ Windows. If the folders did not completely clear, then I recommend to completely clean. Restart the system and wait 12 minutes, if the reason is eliminated, you can reinstall remote browsers.

3. It is worth considering the impact of diagnostic tracking in Windows 10. Many users accuse the service DiagTrack 100% of the loading of the hard disk. If you saw it in the task manager in the use of the load on the disk, then turn it off. Launch command line On behalf of the administrator And enter the commands there one by another:

sC Config "DiagTrack" start \u003d disabled

sC Stop "DiagTrack"

4. Run the command prompt on behalf of the administrator. Dial in search, around start, CMD and right-click start on behalf of the admin. Enter the following command in CMD chkdsk.. This command fix the hard drives errors.

If it does not help, you will start this procedure with elevated functions. Enter the following command and press ENTER:

chkdsk.exe / f / r

/ F. Corrects detected errors.
/ R. Identifies the bad sectors and tries to restore the information.

5. Open and disable cloud protection and look at the disc boot.

6. Indexer windows search Search is one process that can be the culprit with your problem 100th percentage of disc. If you do not use Windows Search, you can check whether the problem is eliminated.

7. Disable Print Managerwhich in turn works at once for all users. Press the key combination Win + R. and enter services.msc.. Your printer will stop working after that. But at least you can check this reason or not. If the reason is at this point, then try to connect another printer or update the drivers.

8. Setup will help you reduce the load on the hard disk.

9. Update your drivers to the last versions.

10. Open the command prompt and enter sFC / SCANNOW.to check the integrity of system files.

11. Open the command prompt, enter the following command and press ENTER to start the productivity troubleshooting tool.

12. The virtual memory is a combination of RAM and a hard disk space and may be the reason for the excessive use of your hard disk. If there is not enough RAM to perform the task, the hard disk is used to add RAM. Then the data moved to the hard disk is returned to RAM. Try to configure the paging file and play sizes. Set the paging file 1.5 times more from your RAM installed on the computer and check if it does not help, then look more.

13. If nothing helps, you can reset Windows. You can do to return then back.

14. Standard power modes are more susceptible to 100% load use of the disk, but the transition to high performance often solves the problem. Click Win + X. and select " Power management", then click on" Additional power parameters"And turn on" ".

15 . The disc can be loaded by 100 percent due to defragmentation, which is configured on the schedule. Dial in search Windows " task Manager"And run the application. Turn off all scheduled disk defragmentation tasks.

16. Otherwise, if the task manager shows 100% disk using windows devices 10 with an interruption mode and a signal message (MSI), see in the Support Service .

Tip: Hard disk wear is the main culprit of hanging and loading at 100%. If your disc is already 7 years old, then it is most likely to be replaced. Nowadays, very popular SSD Disc, replace it instead of your hard hDD disk. Growth to speed is guaranteed.

Today in this article we will consider ways to solve one very unpleasant problem, which is manifested in an overly high hard disk load (HDD) or solid-state drive (SSD). Computer users under windows control Faced with such anomalous behavior of the system very often, recently to look for ways to solve this problem I also had to me. In particular, at some point, my laptop with Windows 10 began to hang and minutes not to respond to requests. Opening the task manager, I found that the loading of the SSD disk reaches 100% even if simple, and without visible causes.

According to the engineer from Microsoft, whose advice as a result and helped me solve my problem, on some systems the culprit "Celebrations" may be MESSAGE SIGNALED INTERRUPT (MSI, interrupts initiated by messages) - it is turned on by default. Some cannot successfully complete the input / output operations when MSI mode is enabled. Due to the infinite waiting for non-responding reading or write operations, the Windows storage stack starts attempting to reset the disk device. It is these discharge attempts that lead to the fact that Windows begins to load the disk for all 100% and, therefore, the system stops responding to requests.

The problem can be eliminated by turning off the MSI mode for Advanced Host Controller Interface (AHCI).

Step 1: First, we need to open the "Device Manager" snap. Click the + R keys, enter the command devmgmt.msc. and click Enter..

Step 2: In the Device Manager window, we find the ATA / ATAPI IDE Controllers node, deploy it and open the properties window of the standard SATA AHCI controller.

Step 3: Go to the Driver tab, click "Details". Now pay attention: in the "Driver Files" field should be mentioned storahci.sys. If so, then sATA controller AHCI uses the so-called InBox Driver (Certified Microsoft, which is in the Windows), therefore, MSI mode can be disabled.

Step 4: Click "OK". We return to the properties window, switch to the "Details" tab and select the "path to the device instance" in the drop-down list. Save yourself somewhere importance, in the future it will be needed.

Step 5: Run the registry editor with a team regedit..

Step 6: We follow this way:

HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ ENUM \\ PCI \\ Controller valueAhci.\\ DEVICE PARAMETERS \\ INTERRUPT MANAGEMENT \\ MESSAGESIGNALEDINTERRUPTPROPERTIESES

"The value of the controllerAhci."We received at the 4th stage of the manual.

Now in the registry window on the right we find the parameter Msisupported, open it with a double mouse click and change the value from 1 to 0.

All, close the registry and reboot the computer. After rebooting, the problem of 100 percent disc boot must disappear.

Disconnect windows search.

Service windows indexing 10 allows you to quickly look for your files, but it can create a high load on.

To stop the service for the current session (before rebooting), open the command prompt. To do this, click "Start" → "All Programs" → "Standard". Click the "Command Line" item with the right mouse button and select "Startup from the administrator." Then enter the following command:

net.exe Stop "Windows SEARCH"

To finally turn off the indexing service, click Windows + R, enter the Services.msc and press ENTER. In the service window that opens, find Windows Search and double-click on it. In the "Startup Type" section, select "Disabled" and "Stop" to interrupt the service. Click "OK" to save changes.

After a few seconds after shutting down Windows SEARCH windows performance 10 must improve significantly.

Disconnect Windows Update.

Windows Update also loads the disk to full. This is usually due to the problem with the loading of patches. You have several options:

Just leave the computer updated. Wait until all update files are downloaded, then restart Windows and allow it to install them. It can take a long time.
Restart the computer and wait until Windows Update decides the problem.
To make sure that it is Windows Update that loads the disc 100%.

If the disc is still overloaded after upgrading, try the following methods.

Turn off the Windows telemetry

You can turn off telemetry not only to save system resources, but also to increase your privacy. Click Windows + R and enter the REGEDIT to open the registry editor. Open in the registry HKEY_LOCAL_MACHINE / SOFTWARE / POLICIES / Microsoft / Windows / DataCollection.

Click the datacollection right-click point and create a new DWORD value (32-bit). Name it allow Telemetry. Then double-click on it and set the value 0. Restart Windows.

Disable diagnostics

Another common cause of high disc boot - service windows diagnostics 10. You can turn it off.

Open the command prompt with administrator rights and execute:

sC Config "DiagTrack" start \u003d disabled

sC Stop "DiagTrack"

In addition, you can also open "Parameters" → "System" → "Notifications and Actions" and disable the "Get, Recommendations and Suggestions for using Windows" This can also reduce the load on the disk.

Windows writes into virtual memory part of data from RAM to reduce consumption random access memory. File expanding virtual memory Also increases the load on the disk.

Open the "Control Panel" → "System Parameters" and select "Extended system parameters" In the window that appears, select the Advanced tab. Then in the "Performance" section, click "Settings".

Here you will find another tab "Advanced", in which there is a section with the inscription "Virtual Memory". Click "Edit" and uncheck the "Automatically control the size of the paging file for all disks" box.

Select your windows disk (C :) and specify the "user size". It is best to enter a value of 1.5 times more than your RAM. Then click "Set" and "OK".

Now you need to clear temporary files in virtual memory. Click Windows + R and enter the TEMP. When the TEMP directory opens, select All Files (Ctrl + A) and delete them.

Disconnect Superfetch

The Superfetch service in Windows 10 should improve the system performance by optimizing the start of the most frequently used you. In practice, it can provoke high load on the disk.

You can disable it and see how it will affect the disc boot. Open the command prompt and enter:

net.exe Stop Superfetch.

Wait a few seconds to check whether the performance of your disk has improved. Then start checking it with the command:

chkdsk.exe / f / r

To complete the disk check, your computer must be rebooted.

Problem with PCI-Express

100 percent disc boot can be connected with incorrect work PCI-Express drivers. Open the Device Manager and expand the IDE ATA / ATAPI Controllers. Double-click the AHCI controller, open the Driver tab and select "Driver Information".

If the path to the driver has the view C: /Windows/System32/dRivers/storahci.sys.So the problem may be in it.

Open the "Details" tab and select "Device instance path" in the drop-down menu. Right-click and select "Copy". Copy the path to the device, for example, in "Notepad".

Then click Windows + R and enter the REGEDIT. In the Registry Editor, find the address HKEY_LOCAL_MACHINE / SYSTEM / CURRENTCONTROLSET / ENUM / PCI / Your_New_Expure. Expand in it Device Parameters / Interrupt Management / MessagesignAdinterRupptproperties.

You will see the msisupported parameter in the right pane. Double-click and set the value of 0. Click "OK" to confirm and restart Windows.

Note that before making changes to the registry would be nice to make it.

High performance

Last try. Try changing the settings windows power 10. With standard power mode, the disc is often loaded by 100%. The transition to high performance mode can solve this problem. At the same time, your computer will use more energy, which may decrease the time of the laptop from the battery.

Click Windows + X, and open "Advanced Power Parameters". Select "High Performance". After a couple of minutes, the load on the disk should decrease.

Users who are long time Worked with a computer, more than once came across the problem of the hard disk load per 100%. This can occur in any version of Windows. Therefore, in the article, I will tell why the disc can be loaded at 100% in Windows 10, and what are the options for eliminating the problem.

Why the disc is loaded by 100% in Windows 10

Causes why disk loaded 100% in Windows 10:

Update system.
Services windows systems Search and Superfetch.
System processes SVCHOST and SYSTEM.
Fragmentation of disks.
The presence of broken sectors.
Loads of third-party applications.

First of all, pay attention to which processes drive a disc 100%. Based on this, it is easier to identify a malfunction:

What to do if the disc is loaded at 100%

If the disc is loaded by 100%, one of the options will help:

update system;
backup;
removal of viruses;
configuring Windows Services.

System Update

Frequent cause of the problem may be downloading updates. In the Task Manager, in the Processes tab, the service node responsible for the update can load the system. If this is a "Windows Update Center", just wait for the end of the update. To the OS not loaded every time the update, as soon as they leave, you can postpone updates:

If you set up a function reserve copy In the archiving services, the data copy processes can load the disk. To change archiving settings:

Windows services and processes

Sometimes, the OS service itself can load a hard drive.

Windows search engine

The Windows Search service is responsible for searching and indexing files. The processes of this service are called searchingindextexer.exe and searchfilterhost.exe. There are cases when the search engine is documented and the hard disk load is 100%. Reboot and new search do not save the situation. In this case, you need to disable malfunction manually:

If the load decreased, then the reason is eliminated and no longer need to do any actions. Over time, if the disc loading appears again, you need to completely disable the service. The appearance of such a malfunction is characteristic when an old hard disk is used in the computer or there are problems with indexing files. For shutdown:

Tip! With a disconnected service, you will not be able to search in the conductor. However, the disconnection of the service will reduce the load on the system, which will be useful for old PCs.

Service "Superfetch" and the SVCHOST process

The Superfetch service is used to maintain and improve system performance. The service starts inside the SVCHOST system process and monitors which applications you use most often to preload them to the system memory. In addition, the service is responsible for the "System and Compressed Memory" process.

With this functionality, frequently used applications are loaded faster. But for pre-loading programs, the service consumes many resources and can load the hard disk. To disable:

If SVCHOST continues to load the system, even after rebooting the PC, read the material: "What is SVCHOST in the task manager and why it loads system resources."

System process

If a significant load falls on the SYSTEM process, and the disabling of the above-mentioned services did not bring the result, it is possible that the process is simply not enough permissions.

It is difficult to determine how the rights of the ntoskrnl.exe file are connected (kernels operating systemthat runs the SYSTEM process) and the disc loading is 100%, however it can help. To add rights:

Important! Check how processes behave in safe mode to find out if the problem is caused by a third-party application / service.

Disc load 100% due to viruses

Do not exclude that your computer has been infected. In the Task Manager, in the "Details" tab, determine the "username". System files "SYSTEM", "SVCHOST", etc. Must be subscribed: System, Local Service, Network Service. If they are signed by your username, I recommend checking Windows 10 to viruses. This can help both professional paid solutions and free scanners, by type Dr.Web Cureit! Or Kaspersky Virus Removal Tool.

Hardware

Wine loading disc 100% in downtime can be a hardware or laptop iron itself. It can be:

If you have any questions or any moments from the article are not clear, write about it in the comment. I and other users of the Windows 10 operating system will try to help.

In Windows 10, problems often arise with a disc loading by 100%. The computer begins to work slowly and when we go to the task manager, we notice that the disc is loaded by 100%. What are the reasons for this and what to do in this case?

Reinstalled the system, with a disc full order, only the basic set of programs is installed, everything seems to be fine, but not quite. But simply speaking, the hard disk hung, and in the task manager we can see that the loading of the disk has increased to the maximum 100%.

Let's figure out why the disc is so much loaded and check the short-term situation caused by the action of working programs or the problem has a long time and how to solve it. Increasing the degree of disc boot can be caused by many factors, so there is no single universal method to solve it.

Windows Search Engine and File Indexing

In Windows 8, 8.1 or 10, the situation can be the situation when the search engine is drawn into the looping process, the result of the disc on the disk when searching for files. Fortunately, it can be disabled manually by stopping the search.

To do this, right-click on the Start button and select "Command Line (Administrator)". Or in search string Start menu Enter the "CMD" command, and then click on it and select "Start on behalf of the administrator".

For temporary stop search engine Windows Dial in the command line window:

NET STOP "Windows SEARCH"

The Windows Search service will be stopped, and the looped process will be closed. Now we go to the task manager and check whether the load has decreased and how long it is loaded. If this method worked and the problem does not appear at the next search, then nothing needs to be done.

However, the problem may repeat after a while, especially if the computer is installed old disc Or the system has problems with indexing files. Then you can completely disable the indexation, despite the fact that it will at least slow down the process of searching for files in the system.

To disable indexing, press Win + R to call the Run window. Then enter the command:

services.msc.

The Services window will open, where you want to find "Windows Search".

Click on it twice to change its startup parameters. If the service works, stop it by pressing the "Stop" button, and then change the start type from "Auto" to "Disabled".

Turning off this service will bring some benefit, especially for old computers, where the indexation slows down the system's work.

Service Superfetch.

The disc can be strongly downloaded by the SuperFetch service. Her influence on windows work Wears dual character. In most cases, SuperFetch has a positive effect on the system of the system, as in recent versions Windows 8.1 and 10 and in earlier Vista and "Seven". But on some computers causes problems, including excessive disc boot.

Superfetch can be completely disconnected in the same way as indexing files in the section system Serviceswhich is called using the Services.msc command.

The list find the Superfetch service. Then we open it with a double mouse click, stop the "Stop" button and install the "Start Type" to "disabled".

Antivirus check

Often the hard drive is 100% loaded due to a malicious computer software. In the Windows 8.1 or 10 task manager, you can sort the loaded processes in the disk use column. To do this, simply click on the "disc" to sort various processes.

If the disk is loaded by 100 by some unknown process, then you can try to disable it. If you know which program is responsible for this process, you can delete it. However, if this is an unknown EXE file and, especially, its process cannot be completed because of "denied access", you should check the computer with antivirus.

The reason may be antivirus programwho installe after windows installations 10 - Perhaps at this moment it scans the disc in the background. In this case, wait until it completes the check, and look as far as it is downloaded. If the antivirus constantly loads the hard drive, then it should be replaced with another.

CHKDSK Disc Checking

Strong loading can cause damaged files. If there are errors reading files and folders, it is likely to lead to the above-mentioned zincioning process during search. What if there are damaged files?

You should scan the disk with the CKDSK command with additional parametersTo not only identify problems, but also try to fix them. To do this, run the command prompt in the administrator mode and enter the following command:

chkdsk.exe / f / r

After scanning reboot the computer and check how much the drive is loaded.

The source of the problem may be the disk itself. If an old hard drive is used, which is possible and damaged, it can download wINDOVS system and lead to a slowdown in the computer. It should be checked on the BED sector, for example, the Victoria or MHDD program, and then see how long it is loaded. In the case of multiple damage it is worth thinking about buying a new one. Sometimes the problem arises due to the SATA cable fault, so it should also be checked.