Instructions for use split samsung system. Why do you need a universal console for air conditioner

The same and lies in water desired code In the memory of the console. As a rule, the console is attached, in which there are codes for different models of air conditioners. To configure the remote, there are two modes - it is automatic and manual.

You can use automatic mode if you do not know what air conditioning you have or the code table does not have your model. To configure in auto mode, you need to take the remote control and send to the air conditioner. Find the "Select" button on the console, click and hold it within 5 seconds, then release.

The remote control will automatically send commands to air conditioning, and sort out all available codes. In this case, the codes will flash and change the codes. As soon as the correct code appears, you will hear sound signal From your device and air conditioning will turn on. At this point, you must click on any button on the remote, the process of scanning codes will be stopped.

Check the operation of the air conditioner with this code. If the commands are executed not correctly or some functions do not work, run auto search for codes again until you find the code at which your air conditioner will work correctly.

Setting B. manual mode It takes less time. Find the code in the code table under your air conditioner model, there may be several of them. Press the "SELECT" button, while the code on the remote display should blink once. Using the numeric buttons, enter the code into the console memory and press the "ENTER" button, the console is programmed.

Check how the commands are performed. If you do not correctly work the air conditioner, try entering the remaining codes. You can also go through the codes using the "TEMP +" and "TEMP-" buttons.

After input right code Air conditioning control panel is ready to work. All major functions will be available to you. From the remote, you can choose the mode of operation of the air conditioner - it is cold, warm, ventilation, auto mode. You can set the desired temperature, adjust the fan speed and select the direction of air flow.

Any modern Samsung air conditioner is created with the fact that the management should be as easy as possible, intuitive. Only the correctly selected remote control allows you to successfully hold the settings of any model of climate techniques. It is not surprising that the console becomes an important accessory, from which the impression of Samsung's air conditioner depends.

Each buyer must understand how to choose a suitable console to further use the air conditioner. It is necessary to take not only the cost of the model, but also its other parameters:

• high quality, which is guaranteed only when using original spare parts and components all;
• compliance with the console and model Samsung;
• the level of functionality, since the remote control must have all the necessary buttons for operational setting climatic equipment;
• ergonomic body.

It is important to note that the optimal level of functionality will show the Samsung air conditioning: the control panel, the instruction from which is attached in each case, will help to conduct a successful and easy setting of climate techniques used.

Functional features of control panels for SAMSUNG climatic equipment

Any modern control panel for Samsung is successfully used only if it is equipped with charged batteries. In each case, two 1,5VAAA batteries are required.

Each control panel must have basic functions for successful air conditioning control.

1. Mode - button to select the optimal mode of operation of the air conditioner.
2. AUTO - automatic mode for setting the temperature and maintaining it.The fan rotation speed is determined by the temperature regime in the room.
3. Cool - cooling mode with mandatory optimal temperature setting.
4. Dry - air drainage mode to remove excess humidity from indoor air in room for giving freshness.
5. FAN mode is suitable for air ventilation, due to which the stagnant air is not allowed.
6. HEAT mode is designed to heat the room. In most cases, warm air is supplied after 5 to 7 minutes. Within the first few minutes, the cold air warms up with an air conditioner, so it is not served directly into the room.

In each case, you can adjust the direction of the air flow, which contributes to the increase in the functionality of the air conditioners Samsung:

• vertical;
• horizontal.

Modern consoles for SAMSUNG air conditioners have a Good Sleep mode, which guarantees the creation of the best conditions for falling asleep, strong sleep and awakening. As a result, at any time of the year, optimal comfort in the bedroom is guaranteed, and the air conditioner time in GOOD SLEEP mode can be adjusted from half an hour to 12 hours.

The remote control for Samsung air conditioners is the possibility of successful adjustment of the conditions in the room, regardless of the person's personal wishes.

Using the remote control:

• Direct the remote control towards the sensor on the intro-unit (see page 11 and find the position of the receiver's remote control).
• When the button is triggered on the remote control, a short beep released by an intro-nate block is distributed.
• There may be interfere with the signal reception by the main unit from the remote control if there are daylight lamps under the controller under the controller, such as the daylight lamps with inverter control.
• If other household appliances react to the signal from the remote control d / y, you should consult in the service center.

Turning on and off

Press the button "SET / CANCEL" On the remote control d / y.
During normal inclusion, the call and the curtains start swing automatically. Air conditioner turns on either in
automatic mode "AUTO"Or in the mode in which the air conditioner worked for the last time.
When the air conditioner is turned off, the curtains stop swing and returned to the closed position.

Choosing a working mode

In automatic mode, the temperature and speed of fan rotation are set automatically depending on the temperature in the room defined by the temperature sensor.

1. Turn on the air conditioner.
Press the button Power On the remote control d / y.

2. Select Operating Mode.
Press the button "MODE" On the remote control, until the mode symbol appears on his display. "AUTO" and fan speed "AUTO". Air conditioner automatically exposes the operation or on "Cool" (gradation) or on "Heat" (Heat) Depending on the temperature in the room.
Each time you click Mode. The mode will be changed to the following types: Auto (Auto), Cool (Cooling), DRY (moisture absorption), Fan (Fan) and Heat (Heating).

Buy air conditioning in Kharkov will not be difficult. It is more difficult to determine the choice of the place of its acquisition. Store 23c will make your life more comfortable. We will help you pick up and. The range of our store will satisfy even the most demanding customers, and air conditioners and prices will quite please you with their wide choice.

Climatic systems help to create any optimal indoor temperature, but not all users know the basic rules, how to use the air conditioner, so as not to harm their health and all living in the house. Consider how and on what mode the air conditioner is included so that the room temperature is optimal.

All air conditioners are divided into the following main species:

• window models - installed in the window opening;
• the wall variant - consists of two blocks, the evaporator is located inside the room, and the remote - beyond it;
• models of the floor location - installation on the floor, with the output of hot air through the window;
• combined class.

In addition, experts share split systems functional features:

• only cooling;
• cold / heat;
• work at low and fairly high temperatures;
• various additional features.

In the last variant, functions such as ionization, moisturizing, flavoring and air purification can be included.

There are special rules on the basis of which the air conditioner is operated at home.

How to turn on air conditioning

Using conditioner To cool the air inside your home is considered for this household appliances The main task, but there are split products that can work in two hypostatas: cold and heat. In the installation there are no difference, except for small nuances: air conditioners are installed only on the walls of the house, and modern models of split systems can be mounted in ceiling floors.

Many users ask the eternal question, how to set up air conditioning yourself? The instruction interprets the main provisions, as it is necessary to properly operate the air conditioning of a specific model after the installation is completed. Adjust the product using the remote controlHow to contact him, we will tell you in detail a little later.

Cooling mode

We use this feature constantly at home when heat comes, so consider this process in more detail.

In order to turn on the air conditioner to the cold, it is enough to click snowflake Key, then select the optimal temperature to which the air can be cooled. When the desired microclimate is achieved, the remote block is turned off automatically, and the evaporator block continues its operation - supports user installed parameters.

The cold air flow comes out of the evaporator and fills all the space, displacing the warmer, which is absorbed inside the system and cools. It is worth the temperature to rise by a pair of degrees, as the outdoor unit again turns on to work to reduce it to optimal optionwhich you installed using the console on the air conditioner.

1. Do not stand in the apartment cooling air below 16 degrees. It should be remembered that when the device is working on full power There is a risk of catching up.
2. The difference between the temperature of the outer and internal air should not exceed 5 degrees.
3. It is not necessary to include a cold product at an outdoor temperature of less than 12 degrees.
4. All models of modern climatic devices are customized to save electricityEspecially this is the converter products - they automatically select the operation mode.
5. All air conditioners should not be included at all with an outdoor temperature below 0 degrees.

Many models split installations, according to the manufacturers, can work at 20 degrees below zero, heating room, but they must be turned off with severe frosts so as not to break the fan. Especially carefully, it is necessary to exploit this technique during sudden thaws.

Heating mode

Modern climatic systems can serve not only cooled air in the apartment, but also heat. For this we take the PU and follow the prompts.

1. Press the Start or ON / OFF key, then hEAT button.
2. If not, then present mode key or the other, over which there are symbols: snowflake, sun, drop of rain and fan. Switch the modes until the desired character appears on the display.
3. Pressing + or - or up / down arrows, you need to adjust the required temperature. Its value should be above 5 degrees that there is now indoors.

Initially, the fan is turned on, and then heating mode. Maximum after 10 minutes the product will begin to pump warm air into the room. If there are no buttons described above on the PU - you are not lucky, this model of the air conditioner cannot work in heat mode.

There are split systems, where you first need to make all the settings, and then click the Start key.

During settings, any model is required to respond to your actions: give out sound signals, flashing LEDs. During the purchase of the product, you need to get acquainted with all its characteristics, so that then do not break your head.

Proper use of Pu

These remote devices are attached to each model. Today there are many different variations, but inscriptions and functions on buttons similar. Most users do not read the instructions, but use the start button and temperature setting. But there are many other keys on the remote control. Tell them titles and basic functions.

1. POWER, in some PU ON / OFF - turn on / off the product.
2. Mode: By pressing it once, you translate the device into the automatic air supply mode, twice the product will work in COOL mode.
3. Swing: The oscillatory movement mode is turned on to disperse the air flow throughout the space.
4. Dry, which means dry - the device works on medium turns.
5. Fan (fan, foam) - air conditioning is slower or faster.
6. Turbo: Maximum turnover and performance.
7. Temp: Temperature Key Cold / Heat Adjustment.
8. Smart Saver (smart savings) - when the optimal temperature is reached, the product turns off and operates in fan mode.
9. Auto Clean: Disinfect and dried all the details of the device. By pressing this key once every three days (while the product works no more than half an hour), you allow it to get rid of the excess moisture yourself.
10. SLEEP: Translation of air conditioner to a seaside mode, cold air applies to the ceiling, we use at night.
11. On Timer: Turning on the timer.
12. OFF TIMER: Disable time.
13. Clean Air: The process of airflow ionization.
14. OK: Confirm key of selected parameters.
15. Cancel: Cancel selected command.
16. Reset: Reset all settings.
17. Lock: Lock buttons (protection against children).

Nuances of exploitation

Modern models of air conditioners are quite complex household appliances, the configuration of which requires compliance with the basic rules.

1. Need clearly select the power of the product Depending on the size of the room: in the regions with a very hot climate, it is necessary to install systems with greater power, with the improved characteristics of the cooling mode.
2. Always relate the mode of operation of the product with weather conditions outside.
3. In order to prevent any colds for any colds, it is necessary to accurately customize the equipment in the cold mode.
4. Conduct regular maintenance - these events will allow you to ensure the normal work of the product, and the whole family is a safe and comfortable microclimate.
5. Installation, maintenance and repair of equipment should only be done by professionals.

Climatic systems can be installed in any rooms, regardless of their configuration and dimensions, because modern technique copes with the task without any problems. The user should only fulfill all the rules and recommendations voiced in this article.

Top Air Conditioners 2018

Split system Haier AS12NS4ERA / 1U12BS3ERA

Split system Haier AS09NS4ERA / 1U09BS3ERA

Split system Mitsubishi Electric MSZ-LN25VG / MUZ-LN25VG

Split system ELECTROLUX EACS / I-09HSL / N3

Split system ELECTROLUX EACS-07HAT / N3

Split system ELECTROLUX EACS-12HSL / N3

06.02.2018

Air conditioning remote control Instructions Samsung - Added link

SAMSUNG air conditioner console

After 12 months from the date of the production of the battery, it may be 100% discharged even if they did not use them. Such a system simplifies life and promotes the comfortable state of a person. Models of unique consoles are shown in the section Codes iRC. 16 E Samsung. In this case, start the function from Fri 1.

If the spectrum of operation of the remote control is significantly reduced, change the batteries and press the ACL button with a ballpoint handle or another narrow item. Web store selling remote controls for. If there are two or more air condes in the room, contact your provider to install personal signal codes for each condushka.

SAMSUNG air conditioners

If the swing spectrum (swing) does not suit you, use the remote control button Vertical direction of air flow to configure the swing spectrum. Fingers are located on the front side of the lattice and raise it. In addition, if the block is used in the modes of cooling and drying, the unit is used at a lower temperature than the heat exchanger can be frozen, which will lead to water leakage and other damage. You also need to create faithful and not expensive in Moscow and MO. And also attach a description of the control panel. Short description of condys from the manufacturer LG. Conduyuk control Samsung Abstract- Annotation for the use of the Samsung Konduk's use to purchase. Full abstract to a universal control panel IRC-16 E Samsung. There are two types of remote control devices.

Instructions on the control panel of air conditioning Samsung

Instructions on the control panel of air conditioning Samsung

At your service installation air conditioners St. Petersburg Modern person is already difficult to present its existence without comfort and convenience. Installation air conditioners St. Petersburg will help you take care to the mood and quality of life negative weather conditions absolutely not reflected. And if you needed installation air conditioners St. Petersburg, welcome to any of the leading companies in St. Petersburg. Mobile and window air conditioners belong to the 1st type air conditioners. All components such air conditioners (This evaporator and condenser) are placed in one block. So-called Split - Systems (SPLIT - divide) belong to the second type air conditioners. Correct installation and installation air conditioners - Petersburg has enough specialized enterprises that will help produce it in the desired room. Installation air conditioners Petersburg will not surprise. They also offer a complete subsequent service. air conditioners. Petersburg Specialists and Professional Installation Designers air conditioners help you make the calculation of the required power of the device for a specific area, will take into account the specifics of the room, will prompt how to make right choice The model and firms of the manufacturer you need. Professional installation as well as installation air conditioners in St. Petersburg - required condition To ensure uninterrupted operation, split systems and air conditioners For the entire time of their service. On the Russian market All brands are presented air conditioners. Service centers guarantee you along with high-quality installation. air conditioners In St. Petersburg full service.

The degree of compliance request: 16.28%
Fragments of the text of the post:

Air conditioning Mobile, Electrolux, is air conditioning The last generation with all useful and possible functions and modes of operation (cooling, ventilation, heating, drainage, as well as a popular automatic mode), as well as a set of additional features. The device is pretty easy and easy to office. Mobile air conditioners for home are controlled by contrasting electronic LED display with programmed buttons, as well as using remote consoleoffice. Comfortable and multifunctional remote controller Du is able to transmit signals for sensors office air conditioner even at a distance of up to 8 m, which allows you to choose required mode Operating, setting the desired temperature mode (with an accuracy of 1, 1 s), set the desired time start time on the timer and perform others useful functions. The main and main advantage of mobile air conditioners is the simplicity of installation. Scope mobile air conditioners, In fact, only an apartment or at home is limited.

The degree of compliance request: 10.94%
Fragments of the text of the post:

So, air conditioning, the internal block of which is fixed on the wall, is called wall mounted air conditioning. But there are cases when you need to manually choose the direction of the submitted air conditioning Wall-mounted type of cold air. Such an opportunity is provided in the latest models air conditioners. All leading (practically) firms - manufacturers of climate equipment recently produce a wide variety of wall configurations air conditioners. Ultimately, the consumer when using air conditioning Can enjoy the highest degree of comfort. Especially succeeded in this case manufacturers of Japanese air conditioners.

The degree of compliance request: 10.85%
Fragments of the text of the post:

As a rule, the cost of mounting the air conditioner offered by the sale companies air conditioners, A slightly higher than the one will ask for a private master. Option when installing air conditioners It is made by those companies that are selling air conditioners is optimal. Cheap mounting air conditioners, Completed by a private trader, all guarantees will not provide you. There are options when cheap installation air conditioners They offer serious companies that are licensed to work such work. Such companies offer not only installation air conditioners cheap, but full of their maintenance. There are quite a lot of models air conditioners And each of these models has its own specific features. It is in such major companies that you can not only purchase climate techniques with a complete guarantee, but also order installation air conditioners cheap. As rules, such companies are long-term participating in the provision of services to the population, therefore, installation air conditioners And the sale is the main direction of their activities. Others believe that installation air conditioners And the sale is the prerogative of specialists of your business. After all, if the remote climathedral system unit should be installed on the wall of a multi-storey house, at a sufficiently significant height, such an installation air conditioners Must be made with the involvement of industrial climbers or using special auto.

The degree of compliance request: 9.79%
Fragments of the text of the post:

There are two common types. air conditioners. Modern inverter control Home or office air conditioner blocks temperature differences and reduces energy consumption by 30% compared to conventional devices. Perhaps the main advantage of such models air conditioners It is almost silent work, which is very important for families with small children or for accommodation in the bedroom. Also a significant advantage of this type air conditioners It is their low power consumption, which is important if a large number of equipment is connected at the same time in the apartment or house. Remote control, which are equipped with most models, allow you to easily and quickly carry out controlair conditioning.

The degree of compliance request: 7.47%
Fragments of the text of the post:

Installation, installation air conditioners Inexpensive development of various technologies is now happening simply by seven-year steps and it is worth recognizing the fact that the installation is now really air conditioners inexpensive and very fast. Installation air conditioners It is inexpensive at a very high quality level - the price does not affect anything here, because mistakes in the installation will lead to negative consequences and the company will definitely lose their face, and with him and a huge number of potential customers. Note that very often installation air conditioners It is inexpensive under the influence of a large number of shares of bonuses and discounts, and this is completely incredible savings. Just paradoxically that against the background that installation air conditioners Inexpensive and quickly performed at this time, many people continue to ignore the ability to install this equipment. Pay attention only to the ability to install air conditioners By installments, which allows increasing number of people to make their lives more comfortable. It is important to note that manufacturers air conditioners Also are not going to pass their position at all. In turn, we are waiting for an increasing number of different models air conditioners, Among which will be much easier to choose exactly what we really need and is suitable in terms of price, quality or appearance.

The degree of compliance request: 5.62%
Fragments of the text of the post:

Requirements to air conditioners - We all want the guarantee of your comfort, so that at any time in our housing it was warm, comfortable, cozy, and in the heat - cool, fresh. Before purchasing such devices, you need to know in advance what requirements air conditioners Presented. TO air conditioners It should be treated as necessary for household appliances, and not as elements of prestige. To the most "ancient" air conditioners, Taken for home, then, so-called, Oroanov. When working all air conditioners For the house, three main modes are used that allow you to cool and clean the air, reduce its humidity. Requirements to air conditioners Includes the possibility of maintaining in the room of a comfortable microclimate. Not the last place is given to architecturally - building requirements, the possibilities of remote office device.

The degree of compliance request: 4.86%
Fragments of the text of the post:

Depending on the temperature regime given from the remote console (Du) they support the so-called climate - control. The difference, as well as the advantages, air conditioners Inverter type lies in the possibility of varying, in other words - the ability to change the capacity of the air conditioner itself. First of all, it should be noted that thanks to its inverter management The fluctuation (drops) of the room temperature is reduced, thereby supported by the permanent climate control. In addition, it should be noted that inverter air conditioners Compared to ordinary, electricity consumption is 30% less, they have a lower noise level. Inverter control Allows about 30% faster to reach a given temperature than in the case of using conventional models.

The degree of compliance request: 4.69%
Fragments of the text of the post:

Tools for cleaning air conditioners The control climate system was designed to delight us with warmth or cool for a long time. If the apparatus flared, it's time to apply an antibacterial agent for air conditioners. Antibacterial agent for air conditioners Eliminates the cause of these ailments. No wonder it is recommended to produce a major cleaning of the device at least once a year using a professional chemical tool for cleaning air conditioners. Most recently, there was no chemical innovation tool for air conditioners. By air is effective tool for air conditioners It will fall inside the unit, and independently there "will pick up".

The degree of compliance request: 3.99%
Fragments of the text of the post:

In technical documentation for goods. Manufacturers of household air conditioners, Having a reversive cycle, as a rule, indicate the temperature range, within which air conditioning can be operated. What can happen with air conditioning, If this restriction is neglected. Most of the modern air conditioners - These are models with two modes of operation. Many buyers air conditioners Worried, and whether its operation is possible in winter. In this consumer will always help highly qualified installation specialists, maintenance. air conditioners and split systems.

SAMSUNG AQ09TSBN Wall Split Systems - Operating and Installation Instructions

Wall Split Systems (Air Conditioners) Samsung AQ09TSBN General characteristics:

• Type - internal block
• Block installation - wall
• Switched with block - AQ09TSBX
• System - thermal pump

Control:

• Remote control
• Timer 24 hours.

General information:

• Noise level (max. / Min.) - 32/24 dB
• Power supply - 220-240 V - 1 phase - 50 Hz
• Air consumption - 450 m. Cube / h

Modes of operation:

• Main modes - cooling / heating
• Power in cooling mode - 2.8 kW
• Power in heating mode - 2.9 kW
• Power consumption in cooling mode - 0,855 kW
• Power consumption in heating mode - 0.803 kW
• Auto mode

Dimensions:

• Split System Internal Block
  • Height - 285 mm
  • Width - 820 mm
  • Length - 210 mm
  • Weight - 8 kg

Guaranteed range of external temperatures

• cooling -10? with ... + 43? With
• heated -15? with ... + 24? With

Type of equipment and year of manufacture: Air conditioners, Wall split systems, 2011 Other equipment models from the Boracay SAMSUNG series

Air Conditioner Samsung Remote Arh-1403 Instructions

To do this, in many SAMSUNG air conditioners there is a test mode. You can enter the test mode by pressing the on / off button on the internal unit and keeping it down for five seconds. The air conditioner automatically places the temperature in the room and the amount of air flow at the optimal level, which reduces the humidity in the room with the current temperature. The ray of the infrared control panel of the air conditioner does not exceed 5-8 meters, moreover, over 5 meters, bright lighting can interfere with the operation of the air conditioner control panels. Infrared air conditioner control panels are easy to operate, but the area of \u200b\u200btheir use has boundaries. However, since the technologies are continuously improved, even such a simple device constantly processes new functions. Working with the remote control of the air conditioner - when using the air conditioner remote control, its transmitting part should be directed towards the internal unit of the air conditioner. When the electricity is unexpectedly disconnecting the air conditioning device, the modes are sent from the remote control and independently resumes the operation of the system in the same modes at the time when the power supply will appear again. When working in dehydration mode (drainage), air consumption is automatically installed in accordance with the optimization algorithm responding to the temperature in the room, so the conditions in the room remain healthy and comfortable even with an increased relative humidity. The remote control comes to the series of SAMSUNG air conditioners - we are tested in practice - 100% everything works.

In order to cope with an error 21 (a malfunction of the thermocouple measuring the air temperature at the input), it is necessary to disconnect the corresponding sensor from the board (the connector (connector) is indicated in the diagram as CN43) and measure its resistance. Sleeping mode. 1. If it is necessary to translate the product to an energy-saving mode, for example, at night, press the automatic activation button of the sleep mode 2. The timer is programmed for periods of time by duration 1 hour by pressing the automatic sleep activation button from 1 to 7 times. However, in this case, the temperature value is not displayed on the remote control display; This mode does not allow you to adjust the temperature in the room. The moisture from the air indoors is intensively and uncontrolled. Infrared consoles are easy to operate, but the control range does not exceed 5-8 meters. Analyzing the balance of these parameters, cools or heats the air of the room.

To cancel the code display, hold the ON TIMER CANCEL button or Off Timer Cancel (Cancel off timer) for 5 seconds. Note: This feature is activated at the factory, but it can be turned off by pressing and holding down the "On / Off" button for 6 seconds. To cancel the standby mode, press the SLEEP MODE AUTO button (automatic standby mode) several times while the timer indicator does not go out. Dry mode (drying) makes the air fresh in a humid climate. The product will beep twice and light indicator (2) will blink 4 times. If the air conditioning system fails or the air conditioner fails, then when the command is turned on, the indicators light bulb on the internal blocks of split systems begin to flash, signaling error codes. 2. Wired consoles transmit signals using special low-voltage thin wires. Terms of Use Capulot for air conditioner RC UNI / AIRCO3 Setting the console If the model code is known: insert the batteries. Opening hours Turn on the air conditioner by pressing the on / off button - air conditioning will give a beep. Open the remote control cover and press the operation mode selection button. If blocks are incorrect, any diagnostics will give an incorrect result.

• Samsung (Samsung) Remote Control - Purpose Buttons Display Remote Control Battery Replacement Battery Battery Battery Discharge, this icon will appear on the remote control display.
• For the remote control, two 1.5V AAA batteries are needed. Storing the remote control of the remote control you do not use the remote control, remove the batteries from the remote control and store it without them. The basic functions.
• FAN mode (fan) will be useful for refreshing the stagnant air indoor. HEAT (heating) Air conditioning can heat your room.
• After inclusion on heating, the air conditioner will start to feed warm air after 5

Adjusting the corner of the vertical air flow manually can lead to damage to the blind mechanism. Where can I buy a remote control device? We, in the online store "Vashpult", you can purchase a remote control from the air conditioner, sAMSUNG instruction It will help to deal with its functions. In the directory posted on the site, you can choose the desired model. We offer only the original product. If one or another malfunction of the air conditioner, the LEDs are lit or blink in a certain sequence, which corresponds to the detected error. Activation of this function will provide you with cleaner and healthy air. Testing. In testing mode, the air conditioner operates in cooling mode with a maximum fan rotation speed, regardless of the room temperature within 18 minutes, after which the installation is reset. You can buy a SAMSUNG air conditioner console with the "AutoreStart" function, which allows you to remember the displayed mode on the equipment even after turning off the electricity. An important function of the air conditioner is AutoreStart. It can not be asked from the air conditioning control panel, but its presence relieves the operation of the air conditioning system. Stop clicking as soon as the desired fan speed appears on the screen display. Mode of operation. Regularly rub the transmitter transmitter and the air conditioner receiver with a dry cloth. - The transmission of signals can be difficult if there are fluorescent lamps in the room, launched by the lamp. At the air temperature of +25 ° C, it should be 10 kΩ with an error of 3% (the resistance values \u200b\u200bat other temperatures are given in the service manuals). If this is not the case, the sensor needs to be replaced. Sleep mode - compliance with comfort options during sleep.

AUTO mode supports a temperature of 22-24 ° C, each half hour compares the outdoor temperature values \u200b\u200bwith a temperature at the inlet to the internal unit of the air conditioner and the specified degrees. Press simultaneously and hold the "up" and "down" button sets the temperature on the console. Sleep mode After placing the air conditioner control of the desired temperature and receiving the SLEEP command, the split system provides set parameters. Wired remote control devices can operate at any distance. Press the AUTO CLEAN button (Auto Cleaning). If the air conditioner is disabled, the Auto Clean (Auto Cleaning) indicator appears on the display of the indoor unit and automatically turns on the automatic cleaning function.

Total five pairs (total ten characters) Switching between pairs of code is carried out by the "MODE" button. 1) pull one battery from the remote. Interestingly, from one wired console you can control the operation of 4-8 air conditioners. Hold these 2 buttons, insert the battery into place. Six zeros will appear on the console. Cool mode - cooling up to 16-18 ° C (depends on the brand of air conditioner). This regime consumers use when it is hot on the street, and you need to create a comfortable coolness in the room. As a rule, setting up a universal console performs a service specialist, but it can also make a consumer and independently, since the remote is completed detailed instructions. Now air conditioning works in / good Sleep / (cooling) mode. - If you do not press the SET button for 10 seconds after pressing the / Good Sleep / or Time Up (forward time) buttons or Time Down, the air conditioner will return to the previous state. By the way, it will have to replace the fee, even if the relay is defective, since it is not supplied separately from the board. Today there have been such innovations that are suitable for all stamps of climate control devices. Each model of the air conditioner corresponds to its code, in particular for the VIVACE series, consisting of four models, will need four different codesDepending on how specifically air conditioning you are dealing.

Consider on the example one of these universal air conditioning control panels. When this function is turned on, the air conditioner operates in cooling mode with a very high fan speed, for fast and efficient cooling, the temperature is set automatically at 18 ° C for 30 minutes. To disable the function, press the TURBO button again. If ee want to use test mode, press and hold the ON / OFF button for 3

5 seconds, then follows 1 signal (beep). To cancel this mode, press this button again. To work the console with your air conditioning, you must enter the model code. Set or maintain exact humidity value This mode does not allow. Using the AUTO Clean function AUTO Clean feature (auto cleaning) will prevent the rise of mold due to the removal of moisture from the internal space of the block. If, during testing, the air conditioner gets the command from the remote control, it goes into command execution mode.

Program-download71: News

Hidalgo. [SOLVED], SAMSUNG AQ07XLN [SOLVED] Schemes and service manual gENERAL air conditioners Electric. Al ._. Ex. 0 SERVICE MANUAL AKIRA. NBN. eight.

Video: Repair of air conditioners - filter cleaning. Tried to reanimate split according to your instructions, the signal from say, is there a service code on the SAMSUNG AQ07XLN / X air conditioner. Thanks in advance.

Detailed instructions for disassembling split system. Sooner or later, any user of a household air conditioner. Tell me why in the drain tray split samsung (nine) the foam strip full of length.

Samsung [Archive] - Refrigerators Forum

SAMSUNG Split System AQ09TSBN / X - Reviews Caught defective air conditioner Samsung (Samsung) SAMSUNG AQ07XLN SER System System. 3.75.

I have a mobile air conditioner Beko-BKK-09C, when it is turned on, 141980 Mikhail (Moscow) 2012-06-29 22:21:49 Samsung VC-8716HT vacuum cleaner. We have a Bosch Benvenuto B20 coffee machine, the instruction, unfortunately lost. Firmware code for split Samsung AQ07XLN system Thanks in advance.

[Archive] Repair of SAMSUNG air conditioners. Need a perch. I can not walk · Conditioned Conder AQ07XLN Help to understand 24 TAB5X · Help Finding a manual for malfunctions for SAMSUNG air conditioner.

Air conditioning control panels Infrared remote control Pow Wall-mounted wires for cassette channels.

Tell me where you can receive instructions, it is not clear how to turn it on and how. good; firmware code (unlock) "samsung aq07xln", blink everything. Could you help the instructions for the SAMSUNG air conditioner (in the photo)?

Helios, you most likely flew firmware in the air conditioner. This is what can help in your situation (note that all the reference information below and only you will decide whether you will use it to independently eliminate the problem): So, to revive your air conditioner, you must enter the firmware code using the remote control. Code of your model: 25 02 57 03 40. Entering the code is carried out by two characters. Total five couples signs. Switching between pairs of code is carried out with the "MODE" button. The course of your actions: 1) pull one battery from the console. Press the "Up" and "Down" button settings to the "Up" and "down" buttons on the remote control. Hold these 2 buttons, insert the battery into place. On the console, two zero with a triangle opposite the top symbol - "AUTO". Release the temperature setup buttons. 2) enter the first pair of code. The "Down" button is responsible for changing the first digit. The "Up" button allows the change in the second digit. Each time you press the digit button, it changes in a circle in a sequence of 0-1-2-3-4-5-6-7-8-9-A-B-C-D-E-F. 3) Use the "MODE" button to select a second couple of characters - a triangle opposite the second symbol from above - "cooling". 4) Enter the second pair of code. The "Down" button is responsible for changing the first digit. The "Up" button allows the change in the second digit. Each time you press the digit button, it changes in a circle in a sequence of 0-1-2-3-4-5-6-7-8-9-A-B-C-D-E-F. 5) Do the same by analogy for the remaining three pairs of signs. 6) Press the "MODE" button to make sure that all five pairs of code (switching) are correct. 7) sending a console with the code to the internal block, press the "ON / OFF" button. The internal unit will lose a me-felt sound, showing that he took a new board firmware code. Pull out and insert the batteries back to the remote (without pressing the buttons) to switch it to the usual mode of operation. For model owners with a 12-valued firmware code, the algorithm is somewhat different (list of codes for most models is shown below): 1) pull one battery from the remote. Press the "Up" and "Down" button settings to the "Up" and "down" buttons on the remote control. Hold these 2 buttons, insert the battery into place. Six zeros will appear on the console. Release the temperature setup buttons. 2) The first half of the code begins with the digit "0". The re-key between the first and second half of the code is accomplished by the "MODE" button. Select the first digit - "0". 3) Press the button indicated in the figure, enter the per-half of the code (six digits, the first of which is zero). Each button is responsible for changing its code digit. Each time you press the digit button, it changes in a circle in sequence 0-1-2-3-4-5-6-7-8-9-A-B-C-D-E-F. 4) The second half of the code begins with the figure "1". The re-key between the first and second half of the code is accomplished by the "MODE" button. Select the first digit - "1". 5) Press the button specified in the figure, enter the second half of the code (six digits, the first of which is one). The procedure is the same as in pp.2. 6) Press the "Mode" button to make sure the first and second half of the code (switching). 7) sending a console with the code to the internal block, press the "ON / OFF" button. The inner block will lose a chalk-wild sound, showing that he took a new code for the boiler. Pull out and insert the batteries back to the remote control (without pressing the buttons) to switch it to normal operation mode. Codes for all models: Model 1 Model 2 Reference 1 AQ07A5ME 014A25-1700b7 AQ09A1ME 016A25-1700d9 AQ09A5ME 016A25-1700d9 AQ12A9ME 017d25-17021d AQ18A9RE 097417-1A00Fb AQT24A1RE 094617-1A023F AQT24A5RE 094617-1A023F SC05ZA8 040000-1740A6 SH05ZA8 006825-1700d9 SH07ZA8 004825- 170,067 SH07ZPGA 026065-17022E SH07ZS8 026064-1720Fb SH09VCD 007d08-1010Fb SH09ZA8 006825-1700d9 SH09ZK8 027064-17221d SH09ZPGA 026566-170340 SH 09ZS2 025266-17A23F SH09ZS8 027064-17221d SH12VCD 007315-10123F SH12ZAB 007227-17023F SH12ZKG 066025-172362 SH12ZPGA 067066-170362 SH12ZS4 066065-17A351 SH12ZSG 066025-172362 SH18ZAOD 086417-1A021d SH18ZPOA 086115-1d0351 SH18ZSOA 085115-1D2340 SH24TA6D 086314-1A023F SH24TP6A 085416-1d0384 SH30ZC2 0E0000-1d020A SH12ZSG D66025-172362 SH09ZS8 027064-17221d SH07ZS8 026064-1720Fb SH12ZPG 067066-170362 SH09ZPG 026,566 -170340 SH07ZPG 026065-17022E AS09A3ME SC09ZA3 / A 010000-1700D9 AS07A3ME SC07ZA3 / A 010000-1700B7 AS09A4ME SC09ZA4 / A 000000-1700D9 AS07A4ME SC07ZA4 / A 000000-1700B7 AS12A1ME SC 12ZA1 / A 010000-17021d AS09A1ME SC09ZA1 / A 010000-1700d9 AS07A1ME SC07ZA1 / A 010000-1700b7 AS12A2ME SC12ZA2 / A 000000-17021d AS09A2ME SC09ZA2 / A 000000-1700d9 AS07A2ME SC07ZA2 / A 000000-1700b7 AQV12Y6ME 007510-10723F AQV09Y6ME 007500-1070Fb AQV12A2ME SH12VA2 005212-10123F AQV09A2ME SH09VA2 006500-1010FB AQV12A1ME SH12VA1 015212-10123F AQV09A1ME SH09VA1 016500-1010FB SH12VCD 007315-10123F SH09VCD 007d08-1010Fb AD18B1 (B2) E09 MH18ZA1 (A2) -09 016223-1000EA AD19B1 (B2) E07 MH19ZA1 (A2) -09 015553-100B7 AD19B1 (B2) E12 MH19ZA1 (A2) -12 015553-10023F AD24B1 (B2) E12 MH24ZA1 (A2) -12 017553-10021d AD26B1 (B2) E12 MH26ZA1 (A2) -12 - AD26B1 (B2) E07 MH26ZA1 (A2) -07 - AQT24A1 (2) RE 094617-1A023F SH24TA1 094617-1A023F AQT24A2RE 084617-1A023F AQT24A2RB 084617-1A023F AST24A1RE 090000-1A023F SC24TA1 090000-1A023F AST24A2RE 080000-1A023F AST24A2RB 080000-1A023F AQT18A1RE 097417-1A00FB SH18TA1 097417- 1A00FB AQT18A2RE 087417-1A00FB AQT18A2RB 087417-1A00FB 087417-1A00FB AQ18A1RE 094417-1A021D SH18ZA1 094417-1A021D AQ18A2RE 084417-1A021D AST18A1 RE 090000-1A00FB SC18TA1 090000-1A00FB AST18A2RE 080000-1A00FB AST18A2RB 080000-1A00FB AS18A1RE 090000-1A021D SC18ZA1 090000-1A021D AS18A2RE 0800001A021D SH12ZPOB 085115-1d0351 AQ18P0GBA 085417-1d0340 AQ18P0GEA 08511-51d0351 AQT18P0GBA 0854d7-1d0340 AQT18P0GEA 0854d7-1d0340 SH24ZP6B 0872d6-1d0362 AQ24P6GBA 087417-1d0362 AQ24P6GEA 0872d6-1d0362 AQT24P6GBA 085417-1d0362 AQT24P6GEA 085417-1d0362 SH24TS6 085416-1d2362 AQT24S6GB 085417-1d2362 AQT24S6GE 085416-1d2362 AQ24S6GB 0852d5-1d2373 SH18ZS0 085115-1d2340 AQT18S0GB 085417-1d223F AQT18S0GE 085417-1d2340 AQ18SOGB 085115-1d223F AQ18SOGE 085,115 -1d2340 SH05ZZ8 005025-17021d SH07ZZ8 005024-170360 SC05ZZ8 000000-17021d AS05Z1AZD 000000-17021d AS07Z1AZD 000000-17021d SH24TP6 (A) 085416-1d0384 AQT24P6GB 085417-1d0384 AQT24P6GE 085416-1d0384 AQ24P6GB 0852d5-1d0395 SH18ZPO (A) 086115-1d0351 AQT18P0GB 085417 -1D0351 AQT18P0362 AQ18P0GB 085115-1D0351 AQ18P0GE 086115-1D0351 SH24TS6 085416-1D2362 AQT24S6GB 085417-1D2362 AQT24S6GE 085416-1D2 362 AQ24S6GB 0852d5-1d2373 SH18ZS0 085115-1d2340 AQT18SOGB 085417-1d223F AQT18S0GE 085417-1d2340 AQ18S0GB 085115-1d223F AQ18S0GE 085115-1d2340 AQ12 * 5MB 017725-17021d AQ12 * 6MB 007725-17021d AQ12 * 5ME 017626-17021d AQ12 * 6ME 007626-17021d AQ09 * 5ME SH09Z * 5 016A25-1700D9 AQ * 6ME SH09Z * 6 006A25-1700d9 AQ09 * 5MED SH09Z * 5D 016024-1700EA AQ07 * 5MED SH07Z * 5D 006024-1700EA AQ07 * 5ME SH07Z * 5 006024-1700EA AQ07 * 6MED SH07Z * 6D 004A25-1700B7 AQ07 * 6ME SH07Z * 6 004A25-1700B7 AQ09 * 7ME SH09Z * 7 016825-1700d9 AQ09 * 8ME SH09Z * 8 006825-1700d9 AQ07 * 7ME SH07Z * 7 014825-170067 AQ07 * 8ME SH07Z * 8 004825-170067 AQ12 * 9ME SH12Z * 9 017D25-17021D AQ12 * 0ME SH127 * 0 007D25-17021D AQ12 * A (B) ME SH12Z * A (B) X 007227-17023F SH30ZC1 0F5495-1D020A SH30ZC2 0E54951D020A SH12ZWH KFR-35G / SWA 25 02 57 03 40 SH12AWH AQ12WHWE 25 02 57 03 40 SH09AWH 25 02 57 00 08 SH09ZWH / AQ09WHWE KFR-25G / SWA February 25 57 00 Fb SH07ZP2 / SH07ZP2A AQ07P2GE 024567-17021d SH09ZP2 SH09ZP2A 025266-170340 AQ09P2GE 025365-170340 SH12ZP4 066065-170362 SH12ZP4A AQ12PA4GE 0660 66170362 AQT12P4GB 0670E6-170362 AQT12P4GE 0680E6-170351 SH07ZS2 SH07ZS2A 024567-17A200 SH09ZS2 025266-17A23F SH09ZS2A AQ09S2GE 025365-1

Irina Viktorovna. 07/26/2016 at 18:16
Irina Viktorovna. 09/15/2016 at 23:06.
Hello, we offer you services for the integrated promotion of your site, you can read more with our services on the link http://www.anacron.ru/ Sorry for anxiety.

SAMSUNG air conditioners

For the full operation of the site you need to include them!

SAMSUNG air conditioners

Modern and comfortable consoles for SAMSUNG air conditioners! You can purchase the model you are interested in in our online store.

DC consoles are designed to control air conditioning remotely. Such a system simplifies life and contributes to the comfort of person.

The consoles of the DC are divided into 2 species - these are wired and infrared. For sub-combat and wall air conditioners, infrared consoles are used. They are also used in window models of cassette systems of air conditioning.

The SAMSUNG remote control performs such commands:

1. Heat - room heating. Heating and air filtration.

2. Cool - cooling of the room, as well as drainage and air filtration.

3. Dry - Decision, filtering and insignificant air cooling are performed.

4. FAN - ventilation of the room. Filtering and constant air circulation without temperature change. The fan rotates in constant mode.

5. AVTO - air conditioning automatically selects the heating or cooling function and maintains the temperature from 22 to 24 degrees.

The infrared console is equipped with commands that produce self-diagnosis, which allows you to quickly eliminate the malfunction.

Instructions for SAMSUNG air conditioners, split systems, consoles

Submers of fresh air

Winter kit for air conditioner price instruction reviews photo with your own hands what it is a winter start-up device

The formula for calculating the power of the air conditioner

Air conditioning Daikin Aty35D. The timer allows you to program the power on and off the Condition.

Installing the air conditioner with your own hands - Features of air conditioners, installation of external and internal blocks, connection in

Installation of the air conditioner independently or can you install the air conditioner yourself how to install air condition yourself

Air conditioning Daikin Aty20d. Air conditioning can be equipped with low-temperature

Choose the most silent air conditioners.

Air conditioning Daikin FT25J. Multistage air purification with photocatalytic

What is able to air conditioning. Much information about air conditioners, split-systems, air cleaner.-..-

Air conditioning in Podolsk. Device of air conditioner and split-system, compressor device (internal, outdoor, externally

Air Conditioners with Fresh Air Influx

Split Split - how to properly care for air conditioning split system

How to choose air conditioning for an apartment or room - Selection of modern office air conditioners

Air conditioning Daikin FAQ71B / RR71BV / W. Control using as a local console

How to choose air conditioning or what you need to know about air conditioners

Mobile air conditioning without an air duct

The main types of air conditioners

Air conditioner noise level

Which minimum temperature can be cooled with a split system?

How to choose air conditioning

Air conditioners. Types of characteristics Comparison of air conditioners

Types of air conditioners, household and semi-industrial air conditioners, mobile and floor conditioners, wall and channels with

Health. Are the air conditioners threaten him?

Air conditioning device - the principle of operation of the air conditioner

Catalog of air conditioners. How to choose air conditioning? Calculation of power. Types and functions of air conditioners.

The most important weather in the house. Air conditioners will create weather - these are their purpose

Practical work number 1 The topic "Operations with files and folders" in OS Windows Purpose of work

Thesis: Improving the efficiency of security services in hotels and restaurants

9. Day of the day in the children's healing camp

Popular on Channel:

SAMSUNG Fault Codes and Error

Total mistakes five. The fault of the room temperature sensor makes it necessary to know the error with code 21 on the display flashes the E1-21-E1 indicator, the fault of the heat exchanger temperature sensor - error 22, the fault of the inner block fan - error 54, the fault of the processor conditioner.
more

Instructions for SAMSUNG air conditioners, split systems, consoles

Disposal
This product is complex from manufactured by materials that are unacceptable to throw away with waste by the usual. Some of them can be used to find out. Repeatedly, how to dispose of items in your region.
Name of each part
Block external.

Name of each part

Internal and blocks external

1 is a decorative panel of the indoor unit.
2 product This product displays air on the side surfaces.
3 - Air is closed to the heat exchanger from above.
4 - the external block is fence on the back and side surfaces.
5 - output after, contact air with heat exchanger in front.

Remember that the model is connected to the enhanced outlet and consumes the energy greater than the usual electrical appliance. Therefore, it is impossible to connect it to extension centers, insufficient sockets as.
Nominal and for most consoles, nutritional requirements are the same elements - they must be type one, not rechargeable, correctly installed.
Selection of work modes
Turning on the device that is already connected to the network, with a remote control you can choose an interesting mode to you.
If you wish, you can completely automate the instrument, turning on the automatic mode. Specify the upper and lower limits of temperatures and you can forget about other actions. The device independently cooling will turn on when the temperature is raised and vice versa.
Want you if you choose a separate mode, it's easy to do - in summer there is enough cooling mode, during cold - heating.
Separately, you can use drainage mode. In this case, the device works in a manner so as to reduce humidity, but when you affect this temperature.
When choosing a mode simply ventilation, air ventilation is maintained.

advanced and Settings Modes
The filter of "neoplasm" perfectly smells removes from the air, along with other substances. Mode Therefore, the "fan" is perfect for air purification.
Applying the timer, you can set the time when the device will turn on and mode.
It turns off the self-diagnosis is convenient because you can find out about the state of the device without resorting to a third party for.
Aid of the fight against the appearance of mold and bacteria The function has self-cleaning. The device independently dries the inner cavity of the unit. This does not give microorganisms for.
Modified work at night there is a "thanks" mode. Sleep inverter type type devices very much. And in this mode it is even quieter.
Tips are useful
If you plan to cool the room, it is not necessary to overdo it - the excess of cold will not be useful for health for and you will spend a lot of energy.
Do not forget to check the condition of windows and doors - cold if the air leaves the room, then the work is complicated significantly.
At the beginning of work it is worth applying the fan operation mode to cool the room faster.
We must not forget about the air ventilation. Fasting oxygen can harm your health.
Air conditioner Cleaning
All actions need to be turned off with an air conditioner. Turning off the plug with dry hand.
All washed components need to dry in the shade.
It is impossible to use solvent, abrasives, gasoline, hot water differently you will spoil the appearance of the outer plastic.
If it seemed to you, there is a malfunction
If the device does not work, it - check could turn off the timer. Either it is connected not just to the network.
If the air conditioner is bad, it cools check a number of moments. It must be configured to be the right mode and sufficient power. It is possible that windows and doors are open to if open. The room in the room has a lot of people or heating the device, the air conditioner will work the system.
Worse, protecting the device from frequent restarts to block will be able to turn on the air conditioner for 3 minutes at once after the disconnection.
If the fog comes from the air conditioner (white smoke), remember that the air is cold when contact with wet causes condensate appearance.
Also, it should be remembered that parts of cold air conditioning will cause appearance therefore - condensate from the air conditioner can flow water.
Warming with housing The external unit is cooled and can freeze. Therefore, the device must be periodically for stopping ice thawing, which can damage the device.
With any problems with the console, you all first check if the batteries are fine, they are installed correctly, whether the button on the remote control is installed.
The sound completely cod can accompany the device during sound.
The heating of the splash, dripping can occur due to condensate motion, refrigerant.
If the smell is felt from the inner block, it is time to make it too. Cleaning, smell can belong to the bloody wallpaper, wall, carpet.

When the air conditioner is operation from led for a long time
Turn on the mode then. Self-cleaning Disconnect the device and do not forget to remove the sockets from the plug, and the batter elements from the remote control.
Before after switching on downtime, it is necessary to verify that both the blocks are not forced to be strangers. Connect the network to the device. Ground. After that, set the appropriate power items to the remote control and use air conditioning.
Places Choice Installation
It is not supposed to put air conditioning in where, places in the air can be machine combustible, oil substance, hydrogen sulfide. Outdoor block operation is noise and can interfere with people. That except, choosing a place for an air conditioner to envisage where you will withdraw condensate.

precautions
Please note that the instrument should be a power outlet to connect sufficient power, otherwise there is a fire or melting fire.
It is unacceptable to apply to connect.
Extensions and turn off the device should never be dry.
Do not put heavy, hot and other wires on food items.
It is not necessary to put objects (water with especially) on both air conditioner block.
Condensate can drip from the device - do not put other and furniture appliances under it.
Do not expose the overload device - turn off the remote button first, and then remove the sockets from the plug.
Never insert your fingers into the air conditioner - it is dangerous.
Do not put yourself and other direct, long-term exposure to cold air.
Full heating of stopping and cooling can be associated with refrigerant leakage.
The smell of Gary or strange time in the sounds of work should alert you - the device disconnect from the network. To assess the situation of specialists, call.

Table of contents:
Disposal
Part name each
Modes Choice of work
Your cleaning conditioner
If you think there is a malfunction
If the air conditioner is not a current to be used for a long time
Place of installation and operation electrical installation
Precautions

Disposal
This manufactured product is made of complex materials that are unacceptable as usual with waste disposal. Some of them can be reused. Find out how similar items are right in your disposal.
The name of each external
Parts block.

Name of each part

The unique feature of the indoor unit of the air conditioner is that the front panel of the inner block allows it to be placed on the images and change them.

1 - button to disable / enable work.
2 - Selection of the mode of operation.
3 - the desired temperature setting.
4 - selection of air start power.
5 - Powerful Warm / Cooling Mode (turns on Pressing one of the specified modes and the fan to the button).
6 - maximum to control the position of vertical inclusion.
7 - dampers / disconnection of the timer.
8 - setting time (programming for timer).
9 - Activation / Disable operation Installation.
10 - Timer "Sleep".
11 - Enable the "Display" mode.
12 - ventilation room temperature.
13 - Enable / disable the plasma filter.
14 - choose the horizontal direction of motion reset.
15 - air parameters.
16 - Switching the keyboard control - selection for the function indicated in blue.
17 - functions of the auto cleaning.
18 - control of the heater (he is if).
19 - Setting the brightness of the display.

before preparing the start of work
Make sure the device is connected to a separate outlet, there is a ground. Elements Install the power to the remote control. Set time. To, check out a foreign objects did not interfere with the movement near the air of the external and internal blocks.
After installing the power to the console, you must set the current time. To do this, click then, RESET Specify the time and click the Disable / Enable button. After that, you need to make sure 2f and the button that the same is lit on the next. The screen by clicking on the time setting button the current set time. The donkey is pressed on the Timer button SET / CANCEL.

Selection of modes clicks
Works on the power button on the remote, turn on further. Air Conditioner Pressing the mode selection button will be able to choose the mode you can now sequentially. Works by pressing it you will choose the following cooling (modes-auto-drying-drying-heating). Selecting the mode you can set the desired temperature. To select the heating mode is possible in the range of 16-30, cooling for 18-30 degrees.
After that you can desired to set the fan mode of a few: it is created (CHAOS sensation of light breeze) and four modes constant from weak, to maximum power.
Working in drafting mode (dehydration) air conditioner provides reduction in air level humidity. The level of the desired temperature cannot be installed, since the device independently chooses considering its current selection. In any case, air conditioning works in such a way as to reduce the minimum humidity to influence the temperature.
Unlike the cooling and heating modes, where the air conditioner only cools heats up or, when you select the auto remote control mode, you can specify the desired temperature range and at a temperature of a decrease. The air conditioner will include the mode when heating the temperature increases - on the contrary, cool the room in the air.

Additional modes and settings
Fast / cooling heating mode. When the room temperature is high too or vice versa, it is recommended to turn on the air conditioner in the maximum power mode. After minutes, it is 30 inclusion (for cooling and 60 it works with maximum ventilation and heat transfer.
Automatic restart function - activates the air conditioner to work in the same mode in which it worked before disabling the emergency power supply of the network.
For maximum cleaning air, there is a PLASMA filter. It can be started to be in any mode of operation of the air conditioner button on pressing Plasma on the remote control.
The "self-cleaning" function - the process starts the removal of moisture from the inner cavities, it is necessary after work in the drainage and cooling modes.
The "Energy Saving" function allows the device to transfer to the economical mode of operation, which operates quieter and consumes less electricity.
Forced mode - in the absence of a remote control, you can work on the air conditioner by pressing the button located on the internal block. Consistently by pressing it, you can turn on the cooling mode and turn off the air conditioner.
Start Check. Timer correctly set time on the remote control. Consample by pressing the restorate button of the second function (2f) and the timer turn on clicking on ON / OFF TIMER. Set the timer time triggering using the installation buttons forget. Not the time that all the time you are controlled by air conditioning using the remote control window with the remote control and commands should be within visibility.
Disable Timer: Check that the 2F button is not activated and press the TIMER CANCEL button. What after the timer image should go out on the display and air conditioner.

ADVICE:
. Do not transfer the room. It is harmful for health and unjustly increases electricity consumption.
. Close the curtains or blinds, works if conditioner. Do not allow the sun room in light with a working air conditioning.
. Control the direction of the valve vertical so that the air temperature indoors is uniformly distributed.
. Make sure that the doors and windows are tightly closed. Otherwise, the cold air will leave the room.
. Regularly air clean the filter. The scored filter relaxes the movement of the air intensity and increases energy consumption.
. Do not periodically forget to ventilate the room. During operation, the air conditioners is not updated as when conducting, it is necessary to follow this additionally.
. To cool quickly at the beginning of work, use the speed of the fan speed enlarged with the mode.

Cleaning the air conditioner
Choose yourself a stable foundation, on which you will stand. Do not forget to turn off the plug from before the outlet on the start of cleaning. Do not use water degrees 40 hot, gasoline, abrasive detergents - can damage it appearance plastic.
Front panel are air filters. They must be needed and checking the need to clean once in order to. Remove Dirt Week You can use those in vacuum cleaners when it is badly removed to wash the filter in warm water with liquid adding detergent. After washing, the filters should be dried in the shade (not for filters).
The Plasma sun must be checked at least once in three months. Cleaning can be used with a vacuum cleaner, or wash with water. They cannot be dried in the sun. Do not touch this first filter 10 seconds after turning off the air conditioner.
Filters deodorizing need to be removed, dried in the sun 2 to put an hour in place.
Periodically examine the external air conditioner block and when the contamination appears, remove it for it, which can cause the company's employee appropriate.
If it seems to you that there is a malfunction
Air conditioning does not work. Check if it is connected to the network power, does the circuit breaker not overloaded. Also that it is possible in the network there is no power or high too voltage (in the second case the air conditioner will work)
Air conditioning does not cool properly. To check there were no obstacles to the air path of the external of about and internal blocks. The air filter must be clean. With too high, the temperature of the air conditioner becomes not so effective. Check out so that the windows and room are closed in the door. Perhaps the temperature is not correct. In maybe there is a source of heat.

Mandatory service in contact the center if:
. The smell appeared strong, Gary's noise in work. Immediately disconnect disconnect the device for the plug from the outlet;
. Network cord fork or hot, it can be seen damage;
. A malfunction code appears during self-diagnostics;
. leakage occurs water from the indoor unit;
. Operated work in the failure of the circuit breaker.

If the air conditioner is not used for a long time
At the end of the air conditioning season, you need to prepare for shutdown. For manufacturing:
. what is cleaning filters;
. Turn on 1-2 hours of warming up the mode to completely dry the inner from the inside of the unit;
. Turn off the air conditioner using the remote control;
. Elements Remove power from the remote control;
. Disconnect the plug from the network power.

Before turning on after a long, check.
. downtime so that there is no traffic barriers near the external and internal blocks;
. Elements Install the power to the remote control;
. Set the time;
. Connect the plug to the network.
Installation location and electrical installation
The operation of the air conditioner must make certified make sure. Specialists that in the place of the alleged installation is not obstacles will be for the movement of air, noise external work The block will not interfere with the living eating and the ability to take condensate from external measures.

precautionary block
Use the plug network and ground with a socket. Do not connect the air conditioner to the outlet more than the lowest. Do not use the extension. - Connect directly to use. Do not rosette damaged plug and power cord. Network with manipulation with a cord and fork should be done with dry.
Do not become yourself and do not put heavy and solid items on the power cord.
It is forbidden to disassemble, modify, repair the device yourself. For any repair work, you need to invite a specialist.
Ensure the rack that for mounting is good and intake. Being a reliable fixation of outdoor avoidance in the block of its fall.
Do not put on the outer and blocks internal objects, especially with water (for example, water from a vase).
Do not insert your fingers and any other technological in the opening items of the air conditioner. The fan runs on high speed, which can lead to receipt if.
Injuries air conditioning stopped cooling or heated can mean refrigerant leakage. In the case of this, you need to cause repair professionals.
Not a path on the stand of cold air flow, it can damage your health.

Installation Split System | Air conditioning

What do you need to know about the installation of the split system? Air conditioning is working to strengthen the necessary temperature and moisture indoors. Vinting air, air conditioning cleans it, skipping weightless stream through special filters. Let's talk about the installation of the most progressive view of the Condition system.
more

Instruction: Installation of the Split System, Video Installation Instructions

Installation of air conditioners. Selection. Montazh internal. Width-allowance for installation of split-systems and. Additional refueling of the refrigerant. Installation of split systems, the whole truth about the installation of air conditioners. Instruction. Dear buyer! Thank you for choosing our air conditioner. Before starting the installation is necessary.
more

Types of air conditioners - Cassette and channel air conditioners, wall split Systems and Multi Split Systems, Conditioners

Split systems - consisting of two blocks (wall, channel, cassette and other types of air conditioners). The air conditioner of the split system is divided into two blocks - the outer and internal, which are interconnected by an electrical cable and copper pipes.
more

Does air conditioner work in winter?

This question occurs most often when there is a need to air conditioning server, hardware, computer lists, etc. those. Premises C. large quantity The fuel technology, where required, regardless of the time of year, cooling the place.
more

Girls, we want to buy and install Split. But here I found according to Art. 25 LCD RF, installation of electrical equipment, including air conditioning (washing machine, boiler, etc.), refers to the reorganization of the apartment. And in accordance with Art. 26 LCD RF should be carried out exclusively by agreement.
more

Installation of split system with your own hands. Wiring Split system and electrical installation. Air conditioning operation

Description of functions and modes mitsubishi air conditioners Electric

Functions and modes of air conditioners MITSUBISHI ELECTRIC 1. Saving electricity consumption; control of the "felt temperature" I SEE is an infrared sensor, scanning the temperature at the floor surface in a segment of 150 degrees, and the control system can calculate the temperature perceived by humans. Trad.
more

What you need to know about the installation of the split system. How to install climatic equipment in.

What you need to know about the installation of the split system. How to establish climate equipment at home is the overseas word "Condishn". The word "air conditioning" passed only in our country. This is actually a piece of phrase AIR-Condition, which translated from English means "states.
more

A few words about air conditioners. User's manual. Brief acquaintance with climat.

A few words about air conditioners. User's manual. A brief acquaintance with climate equipment The advantages of the option using split systems: relatively low installation costs and a small duration of installation Window air conditioner - the most "traditional" type of air conditioner.
more

Basic knowledge about air conditioner (in detail about air conditioners, as the air conditioner is arranged)

Air conditioning - from history to this

From unbearable heat, a person suffered in the distant past. Our ancestors had to resort to elementary ways to protect against heat. Ancient people just hid in the caves. In later times, representatives of noble and rich gods sought to surround their luxury castles by parks and coal.
more

Where to install air conditioning in the apartment. General rules for installing air conditioning

The name "Split system" speaks for itself: Split in English - "divide". Such an air conditioner is divided into two blocks - internal and external. The most overall and noisy parts are enclosed in an external unit, which is installed outdoors, and inside placed lightweight, modern design block.
more

Wall split systems

Wall Split System Conditioner Wall-type This is what is called split by the system. This species Technology includes an inner wall and outdoor unit. Service area of \u200b\u200bsuch systems from 15 to 100 sq.m. Most often they are used in apartments (room, living room, kitchen, children's), country.
more

Air conditioning for office

Or which are office air conditioners and how to choose an air conditioner model for office If you think about how to create a comfortable temperature in the office space, start with the definition of the required air conditioner power. It is easy to do it yourself. Conditional calculation formula.
more

Questions about split systems in Rostov.

Split systems in Rostov questions about split systems in Rostov. Drips split-system? Very often, the Wimteh service center (SPLIT site in Rostov site) calls excited customers with the following issues: why drips from the indoor unit into the room? What if water is split.
more

Split systems Air conditioners Tropic. Firms and brands of air conditioners manufacturers

Split systems Air conditioners Tropic. Firms and brands of manufacturers of air conditioners Air conditioners Tropic type "Split-System" - these are the devices of a separate type, in which the internal unit is installed indoors, and the external unit is outside, for example, outdoors. These air conditioners are n.
more

Fresh air not replace with air conditioning

A person for life is needed fresh, oxygen-saturated air. And it is impossible to replace it - neither delicious food, nor money or a pleasant cool air conditioner. So invented by nature. Even at the beginning of the XIX century, the American doctor John Might created the first cooling device.
more

Is it possible to use air conditioning (split system) with a heating lifuncture when outside the -20 window.

Rat, where powerful servers cost (easily 50-100 kW in the amount), cooling the room has even in winter it is true. But usually such cases use cooling, as it is fashionable to call, "Free cooling" is a natural transition of heat from a high level to lower, since there is no reason to spend.
more

sanya 86, how did you reflect so? Today I also fought because he stopped to choking, I don't know how much enough I was enough, but I explained the device that fills the boobs in the circuit for 10 minutes and watches the testimony of sensors if somewhere there is a leakage, then it will show itself and then he is simply not.
more

Small mobile air conditioning is perfect for maintaining the microclimate indoor to 45 m2. Power S.

In the catalog of Climatestyle, air conditioners are presented from the world's leading manufacturers of climate techniques. All devices have passed tests, have quality certificates. Mobile air conditioners Mobile air conditioning is compact and convenient to use the apicles.
more

Air conditioning Ventilation Poltava 69-38-40

1 EUROFAN CSSU-07HHHAA Air Conditioner Manufacturer: Midea Plant (China), Eco 210 340 Class 2 Air Conditioner EUROFAN CSU-09HHHAA Manufacturer: Midea Plant (China), ECO Class 220 365 3 Air Conditioner EUROFAN CSU-12HHAA Manufacturer: Midea Plant (China), Class ECO 260 415 4 EUROFAN CSSU-18HH air conditioner.
more

What types of air conditioners exist and what is their difference?

There are the following main types of air-conditioning equipment: 1. Mobile or mobile flooring air conditioners are interesting in that they do not require special time of time, materials and money on their installation in the room. They optimally fit the tenant residential or commercial space, since N.
more

How to remove the air conditioner (split system), or how to make a dismantling of the air conditioner. Often situations arise

Home / Articles Articles Show All Estiques Remove the conditioner correctly? How to remove the air conditioner (split system), or how to make a dismantling of the air conditioner. Situations often arise, such as moving, redevelopment, etc. When necessary.
more

Air conditioning is a special apparatus that moves, and also handles air in air conditioning systems. Kon.

Air conditioning conditioners are a special device that moves, and also processes air in air conditioning systems. The air conditioner should adjust the freshness of air indoors, the purity of this air, its humidity, as well as the speed of moving the air through the room. In our.
more

Thesis: Analysis of competitive-vending brands of tea based on the study of its assortment

Glossary terms air conditioning. The system that controls the temperature, humidity and circulation of air. Battery - desiccant. The container that contains filters, a moisture maker for capturing and retention of moisture. Functionally similar to the receiver - dries.
more

Thesis: automation of warehouse activity of JSC "Wimm-Bill-Dann Food"

Types of office air conditioners

The selection of the air conditioner for the office on modern requirements, to maintain ideal comfortable conditions in the air offices, purified from mineral and organic dust, should contain about 21% oxygen and not more than 0.3% carbon dioxide. Its temperature should be within 20-24 ° C, rel.
more

Selection of air conditioner to office.

January 17, 2009 modern requirementsTo maintain ideal comfortable conditions in offices, the air, purified from mineral and organic dust, should contain about 21% oxygen and no more than 0.3% carbon dioxide. Its temperature should be within 20-24 ° C, relative humidity.
more

Several useful tips for those who want to establish air conditioning

Some useful Soviets For those who want to install air conditioning, if you decide to create normal conditions for work and recreation and install air conditioner for this, read this article to the end. It is useful to find out which types of air conditioners are at all. Window type. This is an ordinary coup.
more

Memo to the buyer of the air conditioner. What is harmful or conditioned air conditioning, air cleaner or.

Memo to the buyer of the air conditioner. The air conditioner, air cleaner or humidifier I are harmful or useful. The selection of the seller's choice should be noted that the overwhelming majority of air conditioning values \u200b\u200btheir reputation, but from time to time appear and immediately firms disappear.
more

Types of air conditioners. The choice and the main characteristics of air conditioners.

Types of air conditioners. The choice and the main characteristics of air conditioners. The window conditioner is a monoblock air conditioner, which is mounted in the window opening or a thin wall. Compared to split-systems, the window air conditioner has a number of disadvantages, including a higher noise level and not.
more

Problems - air conditioning does not work, noise, freezes.

Questions: why air conditioning is noise, etc. Questions of our expensive customers: how to install air conditioning? Where to install the air conditioner? How much do you need freon for air conditioner? How to clean the split system? Why can not be included air conditioning in winter? When it is impossible to turn on the coup.
more

Almost every person knows the name of the company "Samsung", it is not surprising, because this is a conscientious manufacturer and the global leader in the production of not only split systems, but also a lot of other household appliances and electronics. The history of SAMSUNG began in 1938. The company was created by a person named Lee Boyon Chol. Oddly enough, but initially it was an organization, in no way associated with advanced technologies and electronics. SAMSUNG small grocery has been selling goods produced in the Korean Tag town. SAMSUNG. Began to engage in the production of electronics only in the 1960s and during this time it was able to achieve heights in his business. At the moment, the company's board of directors includes the grandson of the creator of this corporation.

Varieties of air conditioning systems

To save people from summer heat or unpleasant sensations from disconnecting heating during the winter period, air conditioners were invented. Many, tired of uncomfortable air temperature in their own home, acquire household air conditioners Samsung, they are just enough not only to install, but also dismantle if necessary. To select a suitable device model, you should first familiarize yourself with all the characteristics of different species, because it is impossible to buy a universal device that is passing for each buyer. For the convenience of installing and using manufacturers produce different types of split systems, each of which meets the different requirements of users:

Inverter

Inverter SAMSUNG air conditioners are distinguished from other models. power electronicsHelping to receive alternating current required frequency. It is it that determines the speed of rotation of the engine. Such an air conditioner can smoothly change energy consumption and performance. The inverter allows you to very accurately maintain the specified temperature mode and save electricity.

Outdoor

Mobile floor appliance does not have a high power, but it can be easily moved within the apartment and the exhaust zone of the power supply. It includes only one independent block.

Guardian

If you need to purchase the most simple cooling device, the choice drops to the guide or window air conditioners Samsung. Easy use is provided by the convenient location of all parts of the split system in one monoblock located under the window.

Wall mounted

The most popular solution are SAMSUNG wall-mounted air conditioners. Such devices are located on the wall under the ceiling and do not clutter the space. Their external data helps to be invisible in the interior and fit into any room, which is very important for the home split system.

Multi-domed

In buildings with several rooms use multizone air conditioners. Multi split systems are needed if you need to maintain different microclimate in different rooms. Multisplite costs cheaper than buying multiple air conditioners.

Cassette

Ceiling cassette industrial air conditioning. It is trusted by air conditioning of a large amount of air. Due to the distribution of air at once in four sides, such a device efficiently cools the air.

Channel

Channel semi-industrial air conditioners. Cold air is distributed through the ventilation channels, all the equipment is hidden in space above the ceiling, only air distribution grilles can be seen.

Column

Column conditioner. Such systems do not require a complex installation and at the same time they have high power. With a sufficiently large volume, they do not occupy a lot of space due to their vertical form. It is advisable to install these split systems in rooms with a large air volume.VRF system. Between them and VRV no fundamental difference. Both systems have variable refrigerant flow. From the type of cooling electrical instrument, the price of it will depend on it, the size of the case, the complexity of the installation and connecting the split system. You can not save on Split Systems Samsung, because they are installed for a long time, and they give heat in the cold time or coolness in the heat.

Comparison of the characteristics of popular models

Model / Parameter	aR09HQFNAWKNER.	ar07hqfsawkner	12
Cooling, kW (instrument marking)	2,75	2,05	3,50
Heating, kw	2,9	2,1	3,80
Noise level, dB	24/35	24/33	26/36
Modes of operation.			Ventilation, night, temperature maintenance, air drainage
Power consumption during cooling / heating, kW	0,857/0,803	0,639/0,582	1,090/1,115
Control from the console.	yes	yes	Yes
Overview of additional functions.	Deodorizing filter		Deodorizing Filter, Fine Cleaning Filter

Instructions to the control panel and air conditioners samsung

Each device is equipped with a signal reception board, whose firmware allows you to control the remote mechanism. Split-systems manufacturers tried to make the SAMSUNG air conditioner console as simple as possible, but before starting operation, it is still strongly recommended to study a technical passport, without it, the use of an air conditioner can lead to a breakdown and replacement of spare parts. Just a few simple buttons Enough for managing a mechanism:

• Power button. It starts the starting capacitor, including the motor or turns off the system.
• Switching modes of operation. When pressed, changes the mode in a circle. When installing the mode, you need to select the temperature at which this household device can work correctly in the selected mode.
• Button to install the desired temperature. Helps control the microclimate in the house. In the "Fan" mode, the button remains inactive.
• Select the speed of fan rotation.
• You can configure the timer and choose the power time.

It is worth carefully to refer to the manufacturer of the temperature range of the mechanism. For example, when using an air conditioner in too cold conditions, icing and damage to the cold of important parts of the air conditioner can occur: compressor, fan blades, heat exchange device. This will lead to a breakdown of the mechanism and subsequent repairs with the replacement of parts to the spare.

Specify the temperature at which, without complaints, the Samsung air conditioner model is necessary in the instructions for this model.

Instructions for SAMSUNG air conditioners does not cause difficulties during understanding. All the necessary information is indicated on the screen of the console. The most important in the manual is a diagram on which the SAMSUNG air conditioner is installed. Several tips for using air conditioning:

• When the room is reduced due to the inclusion of the device to the maximum, it consumes more energy and harms health.
• Electricity will be consumed as efficiently as possible if the device has an impeller to direct horizontally when the device cools the air, and almost vertically - when he warms the air.
• Clean filter will also help reduce electricity consumption. It is necessary to periodically check and clean the filters to clean the device from the inside, it is necessary to disassemble it and remove the filter. Before that, you need to turn off the device from the outlet. Cleaning with solvents or abrasive substances is not allowed, they spoil the appearance of the plastic lid.
• During the device, it will not be superfluous to check the windows once again, they must be completely closed.
• For faster cooling, you must first turn on the fan.
• The device maintains that the professional is periodically fills the refrigerant. It is worth producing a refueling center that has a certificate and a guarantee. Only professionals will be able to build and disassemble the device. Unfortunately, it is impossible to trace how much freon pours the master, it remains to hope for his experience and the part of the service.

SAMSUNG air conditioners error codes

SAMSUNG air conditioner error codes helps to make an independent primary diagnostics of domestic instrument faults. SAMSUNG air conditioner repair will not cause difficulties after deciphering the codes, because this information will help the wizard to reveal the breakdown and repair the device.

Some air conditioners are equipped with text mode. To turn on this mode, it is necessary for about five seconds to keep the power button clamped. The unit will report on the presence of an error in working with light bulbs on the panel of the indoor unit, which will either flash or glow into specified sequence. The second will occur if the error has already been identified. If several errors are revealed at once, then first the system will report a more dangerous malfunction.

Translation of the most common mistakes:

• Measuring the temperature of the heat exchanger of the internal unit is incorrect.
• Invalid fan rotation speed. The error appears at a speed that does not go beyond 450 rpm for 20 seconds.
• Invalid measurement of the temperature indicator of the indoor unit.
• Outdoor module icing.

Testing the device for faults occurs simultaneously with the automatic turning on the cooling mode. But the work of the air conditioner at this moment undergoes some limitations. Test mode requires the input of the cooling mode. It will work independently of the installed or internal temperature.

Once the error is found, its code is displayed and the user will be able to diagnose. Error designation matches one of the codes, the decryption is attached to the instructions for the device.

If all LEDs flashes, without any order, it can mean the removal of all firmware. In this case, the flashing will help.

SAMSUNG AQ 09 UGF

Selection of work modes

Useful advice
Cleaning your air conditioner

Precautions

Disposal

Name of each part
External block

2 - air outlet, the blades of the fan are visible behind the grille.
3 - nozzles for attaching the route with a refrigerant.

Internal block

2 - Air access to the room. In idle condition is closed.
3 - Window reception window from the remote control.

Preparation before starting work

Install the batteries in the remote control. Observe polarity and do not install different types Batteries in the remote.

Selection of work modes

. Automatic - you specify the desired temperature range and the device independently includes heating, if the room is indoors below or cool if the temperature is higher.
. Cooling - maintaining air temperature indoors not higher than the value you specified. At the same time, the drying effect is observed.
. Drying - the mode in which the air conditioner dries air, if possible, the minimum cooling it. In this mode, you cannot specify the desired temperature.
. Heating - Heat maintained in the room.
. Ventilation - simply maintains air circulation indoors.

Helpful information:
The internal unit is made with improved aerodynamics of an air cavity, so it works quietly and efficiently.
Additional modes and settings
This model is beneficial for a number of useful modes.
During operation, you can set the fan speed, which affects its volume and heat exchange intensity.
You can manually specify the direction in the vertical plane and turn horizontal guides so that the air from the indoor unit is constantly right or left.
The turbo function is used with air cooling mode. Allows you to cool the room to the desired digits in a shorter time.
Using the "Good Sleep" function (Good Sleep) you can better sleep. Set the air conditioner when you go to bed, sleep and awakening time and it will independently maintain a colder temperature while falling asleep, slightly raise it while sleep and helps you wake up with a portion of cold air.
There is also a power and shutdown timer. The first sets the time when the air conditioner should turn on. The second indicates the trip time. Thus, you can program the device to work yourself on certain hours.
A special SMARTSAUR mode is available for cooling mode. Including it you save energy, because the air conditioner keeps the temperature range from 24 to 30 degrees. If you want to set a lower value, you will have to turn off this mode.
During the operation of the air conditioner, its internal unit is constantly in contact with the condensate, which contributes to the growth of fungi and mold in the air cavity. To prevent the appearance and growth of mold and should be used from time to time this mode.

Useful advice

To rationally use electricity, you need to follow the position of the horizontal partition. When cooled, its direction should be closer to the horizontal, when heated - closer to the vertical.
Make sure that the windows air conditioner are directly closed during the operation of the window, but do not forget to ventilate the room with the long operation of the air conditioner.
Check and clean the air filter regularly - these reduces electricity costs.
To quickly cool the room first, turn on the fan to the turbo mode.
Cleaning your air conditioner
Use a reliable support while cleaning the air conditioner. Do not forget to turn off the air conditioner using the console, and then remove the plug out of the outlet. All actions perform dry hands.
Do not use for washing air conditioner gasoline, solvents, abrasive detergents and hot water (more than 40 gr. Sellia) - all this can spoil the appearance of plastic.

The device fails to turn on 3 minutes after shutdown. This is normal protection against frequent engine launches. Wait and turn on the device after 3 minutes.
After turning on the warm-up mode, the internal unit begins to work not immediately. This is a protection against blowing cold air - wait until the heat exchanger warms up and earns the fan.
When working in heating mode, the internal unit is sometimes disconnected. In this mode, it is necessary to periodically defrost the external unit, so the operation of the air conditioner will periodically stop.
During operation in the drain mode, the internal unit is periodically turned off. The task of the air conditioner in this mode is to dry the air, while the minimum cooling it. Therefore, the internal unit will periodically turn off.
After turning off the electricity and the appearance of nutrition in the network, the air conditioner has independently turned on and began to work, although no one controlled them with the remote control. If the air conditioner worked before turning off the power in the network, then after the power appears it turned on to work in the same mode of automatic restart.
From the external block the water flows. This is normal because when the air conditioner is working, the heating industry and other parts are cooled and condensate appears on them. In the defrosting mode from the heat exchanger of the external block, ice is removed.
From the outer block comes out white smoke. If the air conditioner heats the room, then the flow of cold air comes out of the outer unit, which causes the appearance of fog.
Fog out of the indoor unit. If the room is wet air, and the air conditioner works in cooling mode, then the moisture will turn around the flow of cold air coming out of the air conditioner in the fog.
The remote control does not work, the display has become faded. Check the presence of batteries, the correctness of their installation, replace them with new ones.
Air conditioning coolly cools. Check if windows, indoor doors are closed. Do not heated the straight sunshine room, there is no additionally working heating appliances. Is the mode of operation correctly?
Air conditioning does not cool / heats up. This can occur when refrigerant leakage. Call the installation professionals for advice and repair.
The air coming out of the inner block has an unpleasant smell. It is possible its source is a wall, wallpaper or carpet near the inner block.
During operation, the internal block makes cracks. The temperature change causes a change in the size of the plastic, which causes such sounds.
Hears the bouling during operation. It is normal because the condensate and refrigerant movement can cause similar sounds. If the boulock is distributed when the air conditioner is turned off, it can be associated with air suction through the hose of the discharge condensate during the operation of exhaust ventilation.

Turn on self-cleaning mode to dry water in the inner block.
Then turn off the air conditioner using the remote control.
Disconnect the power outlet.

Connect the plug to the outlet that is suitable for power and make sure that the air conditioner is grounded properly.
Install the batteries of the same type in the control panel.
Turn on the air conditioner.

Mounting work must be carried out by experts with experience. The same refers to working with power grid.
Consider that the external unit can be noise while working, which can irritate living near people. The place must be selected so that there are no obstacles to the air movement and there was an opportunity to take condensate.

Precautions

Always use the device with a good grounding.
You can not pull the power cord, put solid and heavy items on it, step.
Do not insert your fingers and pencils into the operating holes of the air conditioner - this can lead to injuries.
Do not become and do not put foreign items on both air conditioners.
Fasten the external unit on high-quality, serviceable fasteners.
Make sure that the power plug is clean, use it only with dry hands.
You can not modify, repair and change the power wire, air conditioner nodes.
Do not disconnect the plug from the outlet during the operation of the air conditioner - first disconnect it using the remote control.
Do not have a long time under the jet of cold air - it can harm health.
When the oddities appear in the operation of the air conditioner (the smell of Gary, strange noise), disconnect it, disconnect from the power supply and consult specialists.
If the air conditioner stopped heating / cooling, then this may be refrigerant leakage - refer to the specialists.
Before cleaning the device, be sure to disconnect the plug from the power supply.
Carry the room while using the air conditioner.
Disconnect the device from the power supply during a thunderstorm.

Hide

SAMSUNG air conditioners in the Russian Federation are popular. The main difference from the air conditioners of other brands - in its own way unique design in the style of Modern.

There are still insignificant breakdowns and almost all of these malfunctions (error codes) Samsung air conditioners can be repaired in special service centers.

How to exploit air conditioners Samsung reviews about them consumers, we will consider in our article.

Sumsung air conditioning - Specifications

Under the Samsung trademark, air conditioners are produced using the latest technologies to create a magnificent climate to their users.

Conditioners Samsung (instruction manual attached to each model) is a combination of modern design, innovation and a complete set of functions.

Samsung mainly focused its attention on the production of split-systems of the window, wall, cassette, column and channel type.

Common Features of SAMSUNG Air Conditioners

SAMSUNG air conditioner installation - Non-flat and pretty fast. Such climatic equipment is working almost silently, you can adjust the air flow in three directions.

New models of Samsung air conditioners have the most economical class of energy consumption "A". Plus, a convenient round form of a liquid crystal screen (display) of digital input. With this display, you can control the "health" of the room. In addition to the power of the air conditioner and its current mode of operation, the room is displayed on the screen. The digital input screen monitors the conditions in the apartment or house to be comfortable for all users of the Samsung air conditioner (instructions for the console comes complete with climatic equipment).

Universal remote For SAMSUNG air conditioner

Samsung brand air conditioners fit into any atmosphere, harmoniously combined with a variety of room decor. New models of air conditioners have the design of the housing that does not have a slot. When the air conditioner is turned off, its front panel is closed, which has a clean surface and prevents dust accumulation due to a special filter. Therefore, all that is necessary for cleaning during the whole period of operation is immediately wipe or rinse this panel.

And the absence of such a filter will lead to a cluster of dust, and this, in turn, will reduce the operational period of the air conditioner and increase the flow of electricity.

SAMSUNG air conditioners - consumer reviews about their operation and repair

To date, there are quite a few sites that are dedicated to air conditioners under the Samsung brand name. For example, Samsung air conditioners - customer reviews in huge quantities Presented on the site "Klim24" ().

Wall-mounted air conditioner Samsung

User Sergey tells: "Before the acquisition I read a lot of reviews and in many of them it was written that the outer block of the Samsung air conditioner vibrates and rumbles like a tractor. I absolutely disagree with this opinion, since I have familiar installers, which have already installed more than one hundred such air conditioners, and everything works fine, silently. Therefore, either you incorrectly made Samsung installation of air conditioners, or you had a marriage.

In general, the shortcomings of the Samsung brand air conditioners did not find, and their advantages include: reliability, simplicity, low noise level, attractive appearance and democratic prices. "

Cassette air conditioner Samsung

On the same site ( http://www.clim24.ru/condicionery-samsung/otzivi.ht.) User Stanislav believes that Samsung's air conditioners have many as pros and cons. So, from the pros notes: "Modern design using blue lights, useful additional functions (Smart Saver, Plasma Ion), a convenient dial with a temperature display on the internal module. "

And from the minuses: "The outdoor unit of the SAMSUNG air conditioner is noise, but only hear it when the window is open. Included the power drive is quite short, I had to connect to the extension. And on the console for the air conditioner Samsung, many buttons are confused. And quite expensive, I would like cheaper. "

On the website WikiMart ( http://appliances.wikimart.ru/climatic/conditioners/Model/31370777/kondicioner_samsung_aq07tsbn/) User Igor says: "I have long been using the Samsung brand conditioner. And until I did repair of air conditioner Samsung, Only - annual service. There were no problems, therefore I do not find special flaws. And from the advantages you can allocate: an affordable ratio of quality - price, simplicity in service, ease of operation, stylish appearance, efficiency. In a word, standing, reliable and inexpensive thing! ".

Window air conditioner Samsung

There are completely negative customer reviews, for example, on the site Torg.mail.ru ( http://torg.mail.ru/review/goods/aircons/samsung-9/) User under the nickname Irusik. Irina shares: "I have acquired somehow the air conditioner of the Samsung brand and two days later he already broke. Displayed the error code screen. Everything sAMSUNG air conditioners errors I knew from the instruction and realized that without repair it could not do here. I thought - you need to call a service center. But only this center of the whole 2 months ignored me. And when the "specialists" still arrived, then the repair of the SAMSUNG air conditioner could not. After a few more times came and replaced the sensors and block, but the air conditioner did not work. They said to make dismantling, but at my expense. And then the installation of the Samsung air conditioner is again for my money. He asked for an air conditioner error Samsung to pass it back to the store. In response, the company, to put it mildly, rushed us! "

Channel air conditioner Samsung

Such a service as high quality Repair of air conditioners Samsung in Moscow, Provides the site "Rembyttech" (http://rembitteh.ru/). High quality And the correctness of the repair work by specialists of this site is confirmed by consumer reviews. For example, the user Olga says: "The application was accepted promptly, and the master came to the time convenient for us. In general, extremely satisfied, the air conditioner works fine again! ".

Instructions on the following models:

SAMSUNG AQ 09 UGF
Samsung Aqv09YWB.

SAMSUNG AQ 09 UGF air conditioning

Selection of work modes

Useful advice
Cleaning your air conditioner

Precautions

Disposal
In the manufacture of this, substances can be used to recycled. Therefore, specify in your region, as you should dispose of according to local legislation.

Name of each part
External block

1 - on the rear-side surface of the air fence.
2 - air outlet, the blades of the fan are visible behind the grille.
3 - nozzles for attaching the route with a refrigerant.

Internal block

1 - Air fence to the internal block.
2 - Air access to the room. In idle condition is closed.
3 - Window reception window from the remote control.

Remote control

Preparation before starting work
Before switching on, make sure that the air conditioner is connected to the outlet of sufficient power and is properly grounded. Ensure that there are no obstacles to air movement near external and internal blocks (curtains and other).
Install the batteries in the remote control. Observe the polarity and do not install different types of batteries into the console.

Selection of work modes
The following operation modes are available for this air conditioner:
Automatic - you specify the desired temperature range and the device independently includes heating, if the room is indoors below or cool if the temperature is higher.
Cooling - maintaining air temperature indoors not higher than the value you specified. At the same time, the drying effect is observed.
Drying - the mode in which the air conditioner dries air, if possible, the minimum cooling it. In this mode, you cannot specify the desired temperature.
Heating - Heat maintained in the room.
Ventilation - simply maintains air circulation indoors.

Helpful information:in the heating mode, the air conditioner turns on the internal unit not immediately, but after 3-5 minutes. This is necessary to warm the heat exchanger and protects the user from cold air supply. In addition, in this mode, it is frosting an external unit, so periodically the operation of the air conditioner stops (no more than 10 minutes) to defrost the frozen parts.
The internal unit is made with improved aerodynamics of an air cavity, so it works quietly and efficiently.

This model is beneficial for a number of useful modes.
During operation, you can set the fan speed, which affects its volume and heat exchange intensity.
You can manually specify the direction in the vertical plane and turn horizontal guides so that the air from the indoor unit is constantly right or left.
The turbo function is used with air cooling mode. Allows you to cool the room to the desired digits in a shorter time.
Using the "Good Sleep" function (Good Sleep) you can better sleep. Set the air conditioner when you go to bed, sleep and awakening time and it will independently maintain a colder temperature while falling asleep, slightly raise it while sleep and helps you wake up with a portion of cold air.
There is also a power and shutdown timer. The first sets the time when the air conditioner should turn on. The second indicates the trip time. Thus, you can program the device to work yourself on certain hours.
A special SMARTSAUR mode is available for cooling mode. Including it you save energy, because the air conditioner keeps the temperature range from 24 to 30 degrees. If you want to set a lower value, you will have to turn off this mode.
During the operation of the air conditioner, its internal unit is constantly in contact with the condensate, which contributes to the growth of fungi and mold in the air cavity. To prevent the appearance and growth of mold and should be used from time to time this mode.

Useful advice
It is not necessary to turn on the air conditioner to the maximum and transfer the room. You can harm health and will lead to electricity overrun.
To rationally use electricity, you need to follow the position of the horizontal partition. When cooled, its direction should be closer to the horizontal, when heated - closer to the vertical.
Make sure that the windows air conditioner are directly closed during the operation of the window, but do not forget to ventilate the room with the long operation of the air conditioner.
Check and clean the air filter regularly - these reduces electricity costs.
To quickly cool the room first, turn on the fan to the turbo mode.
Cleaning your air conditioner
Use a reliable support while cleaning the air conditioner. Do not forget to turn off the air conditioner using the console, and then remove the plug out of the outlet. All actions perform dry hands.
Do not use for washing air conditioner gasoline, solvents, abrasive detergents and hot water (more than 40 gr. Sellia) - all this can spoil the appearance of plastic.

If it seems to you that there is a malfunction
Air conditioning does not work. Check whether the plug is connected to the outlet, whether there is power on the network, whether normal voltage digits are exceeded.
The device fails to turn on 3 minutes after shutdown. This is normal protection against frequent engine launches. Wait and turn on the device after 3 minutes.
After turning on the warm-up mode, the internal unit begins to work not immediately. This is a protection against blowing cold air - wait until the heat exchanger warms up and earns the fan.
When working in heating mode, the internal unit is sometimes disconnected. In this mode, it is necessary to periodically defrost the external unit, so the operation of the air conditioner will periodically stop.
During operation in the drain mode, the internal unit is periodically turned off. The task of the air conditioner in this mode is to dry the air, while the minimum cooling it. Therefore, the internal unit will periodically turn off.
After turning off the electricity and the appearance of nutrition in the network, the air conditioner has independently turned on and began to work, although no one controlled them with the remote control. If the air conditioner worked before turning off the power in the network, then after the power appears it turned on to work in the same mode of automatic restart.
From the external block the water flows. This is normal because when the air conditioner is working, the heating industry and other parts are cooled and condensate appears on them. In the defrosting mode from the heat exchanger of the external block, ice is removed.
From the outer block comes out white smoke. If the air conditioner heats the room, then the flow of cold air comes out of the outer unit, which causes the appearance of fog.
Fog out of the indoor unit. If the room is wet air, and the air conditioner works in cooling mode, then the moisture will turn around the flow of cold air coming out of the air conditioner in the fog.
The remote control does not work, the display has become faded. Check the presence of batteries, the correctness of their installation, replace them with new ones.
Air conditioning coolly cools. Check if windows, indoor doors are closed. Do not heated the straight sunshine room, there is no additionally working heating appliances. Is the mode of operation correctly?
Air conditioning does not cool / heats up. This can occur when refrigerant leakage. Call the installation professionals for advice and repair.
The air coming out of the inner block has an unpleasant smell. It is possible its source is a wall, wallpaper or carpet near the inner block.
During operation, the internal block makes cracks. The temperature change causes a change in the size of the plastic, which causes such sounds.
Hears the bouling during operation. It is normal because the condensate and refrigerant movement can cause similar sounds. If the boulock is distributed when the air conditioner is turned off, it can be associated with air suction through the hose of the discharge condensate during the operation of exhaust ventilation.

When air conditioning will not be used for a long time (at the end of the season of use)
If you are not going to use air conditioning for a long time, then you need to cook it to a snone.
Turn on self-cleaning mode to dry water in the inner block.
Then turn off the air conditioner using the remote control.
Disconnect the power outlet.

For inclusion after the period without operation
Check if there are obstacles to the air movement near the external and internal blocks.
Connect the plug to the outlet that is suitable for power and make sure that the air conditioner is grounded properly.
Install the batteries of the same type in the control panel.
Turn on the air conditioner.

Place of installation and electrical work
Must be carried out by experts with experience. The same refers to working with power grid.
Consider that the external unit can be noise while working, which can irritate living near people. The place must be selected so that there are no obstacles to the air movement and there was an opportunity to take condensate.

Precautions
The power cord must be connected to sufficient power outlet. You can not connect it to the extension.
Always use the device with a good grounding.
You can not pull the power cord, put solid and heavy items on it, step.
Do not insert your fingers and pencils into the operating holes of the air conditioner - this can lead to injuries.
Do not become and do not put foreign items on both air conditioners.
Fasten the external unit on high-quality, serviceable fasteners.
Make sure that the power plug is clean, use it only with dry hands.
You can not modify, repair and change the power wire, air conditioner nodes.
Do not disconnect the plug from the outlet during the operation of the air conditioner - first disconnect it using the remote control.
Do not have a long time under the jet of cold air - it can harm health.
When the oddities appear in the operation of the air conditioner (the smell of Gary, strange noise), disconnect it, disconnect from the power supply and consult specialists.
If the air conditioner stopped heating / cooling, then this may be refrigerant leakage - refer to the specialists.
Before cleaning the device, be sure to disconnect the plug from the power supply.
Carry the room while using the air conditioner.
Disconnect the device from the power supply during a thunderstorm.

SAMSUNG air conditioning

Table of contents
Disposal
Name of each part
Preparation before starting work
Selection of work modes
Additional modes and settings
Useful advice
Cleaning your air conditioner
If it seems to you that there is a malfunction
When air conditioning will not be used for a long time (at the end of the season of use)
Place of installation and electrical work
Precautions

Disposal
In the manufacture of this air conditioner uses substances that can be used for recycling. Therefore, specify in your region, as you should dispose of according to local legislation.

Name of each part
External block

The air enters the heat exchanger on the rear, as well as side surfaces (1). Announced front (2).

Internal block

Remote control

Preparation before the operation of the air conditioner
Note that the installation and connection of the instrument to the power grid should be made by specialists who have similar work experience.
Connecting such power appliances follows to a network that will withstand peak loads that occur during operation. There must be grounding.
When choosing batteries for the remote, remember that both must be one type (firm) and the level of discharge. Do not use rechargeable batteries.

Selection of work modes
The device is included in the network must be started using the remote control. Next, you can select the mode of operation sequentially pressing the MODE button.
For the comfort mode of the air conditioner, you can enable the "Auto" mode. It has the opportunity to set the desired temperature range, which will not be distracted once again. When the temperature is reduced below, or vice versa exceeding the value will automatically turn on the mode necessary in this case (heating / cooling).
If the street is steadily hot (cold), then one mode is suitable. Heating with an air conditioner has the feature that the device will have to periodically stop to defrost the frozen external block.
When choosing a dehydration, the device will be removed moisture, while in this way dosing work to minimally cool air.
In the fan mode, the device does not simply organize air recycling, but also clears it using built-in filters.
Additional modes and settings
So that in the room was not too dry air, the "Comfort" feature ensures that the humidity corresponds to the temperature.
A highly efficient filter does not simply remove microparticles from the air, it perfectly removes allergens from the air.
Ionization will also be quite by the way in an apartment with electrical appliances, which in our time are increasingly shifting the ion balance not to the healthy side.
The function of the turbo mode for the fan allows you to quickly reach the desired room temperature level.
Since the electrical system inverter, the device works quieter and produces a smaller load on the power supply.

Useful advice
When cooling the air, try not to put too low numbers - it may not be healthy and lead to energy overruns.
Make sure that the windows and door doors are closed, otherwise the newly cooled air will simply leave the room.
If the room is a heating device or a lot of people, then cooling work will occur more slowly.
Follow the curtains and blinds - straight sunlight also heats the room and interferes with the operation of the air conditioner.
Be sure to ventilate the room (sometimes), restoring the normal oxygen content.

Cleaning your air conditioner
Be sure to use a steady basis, cleaning your air conditioner.
Do not perform any actions until you disconnect the plug from the socket with dry hands. Cannot be used solvents (eg ifin), hot water and abrasives - all this can spoil the appearance of plastic.
If suddenly it seems that there is a malfunction
If the device simply does not work, check that it is connected to the network and there is a current in it. Also check may not work the remote. In this case, you need to make sure that the batteries are installed correctly (polarity).
If it suddenly fails to turn on the device immediately after dispense, then it may be the operation of protection against frequent inclusions. Wait a little and try a little later.
From both blocks can go cold air in different modes, this may be accompanied by the appearance of fog near the flow of cold air.
Stop in work for 10 minutes or lack of startup immediately after pressing the button on the remote control when heating the room is the norm. First, the internal unit should warm up, secondly, periodically need to defrost the outdoor unit, while the work temporarily stops.
The manifestation of the automatic restart system can be taken for malfunction. This feature will automatically turn on the device after an emergency power off on the network.
During heating, plastic can produce a crack - this is normal.
The sounds of bungalum and sprup water can accompany the movement of water (condensate) and refrigerant on the tubes.
During heating / cooling, condensate may be allocated from the air conditioner - this is a normal situation.
If the room cannot be cooled, then you should check whether the mode of operation is set correctly, whether the windows are not open, there is no included heating devices in the room. It is possible to work the device interferes with air filter pollution or direct sunlight in the window.
The appearance of the smell can be associated with the contamination of the inner block or air filters.
When your air conditioning will not be used for a long time
Run heating by 3 (2-3) hours for drying the inner block. Next, disconnect from the network and remove the batteries from the remote control.
Before the first to start the launch, check the absence of obstacles to the air movement, grounding. Setting the power items turn on the device into the network.
Place for installation
Do not use the device in places where the appearance of combustible gases or hydrogen sulfide will be expected. Do not use it in places where there are many machine oil. From the external block you need to delete condensate and it can make noise that will interfere with people.
The air conditioner is not installed in places close to high-frequency equipment and electronics.

Precautions
Be sure to follow the correctness of the network connection. Instruments of this power must be directly connected to a powerful socket with a grounding, the use of extension cords is unacceptable.
It is impossible to change independently (modify) or repair the air conditioner.
Connection and disconnection to / from the network must be performed with dry hands.
It is forbidden to put any items on both units, a power wire.
You can not pull the plug from the outlet when the device is running - first stop working with the remote control.
It is dangerous to poke any items inside the device - a high-speed fan can cause injury.
The appearance of burned odor or unusual sounds should alert you - disconnect the device from the network and call the installers.
Do not expose people and animals to long exposure to cold air.
It is not recommended to put extraneous objects and electrical appliances under the air conditioner - water can drip out of it (condensate).
If your air conditioner ceased to warm and cool, then it is necessary to check whether the refrigerant leakage occurred.