Menu
Is free
check in
the main  /  Programs / How to remove an empty page in open office. How to remove an empty page in the Word

How to remove an empty page in open office. How to remove an empty page in the Word

Sometimes B. text files Paragraphs and empty intervals appear, which later create a blank sheet at the end of the document or in the middle of it. It is in turn displayed in all parameters and file settings. It does not create special inconvenience, but the document with such formatting looks, leaning, is inactively. What if you notice such a mistake, but do not know how to remove the page in the Word? Performing the following actions will help bring general form Document in order.

Method number 1:

  • Press CTRL + END. Application of this combination in Microsoft Word. Moves the mouse cursor on the last sheet of the file.
  • After that, press the Delete or Backspace button.
  • Pure leaf will disappear. If there were some words or characters on it, then they will first be deleted.

Method number 2:

This method based on the removal of non-printing signs allows you to remove the empty page in all microsoft versions Word:

Separately, it is worth noting the "page breaks" - they should also be removed when assistance Microsoft. Word, if you do not need empty sheets in the text.

  • There are versions OpenOffice. and under the operating system Linux, and under Windows (others are also supported oS - FreeBSD., Mac OS X). This allows you to fully work with the same documents on computers with different OS.
  • OpenOffice. Legally freely distributed with the source texts. Thus, there is no problem of non-license system software.
  • File formats OpenOffice. Open, documented and widely known. Moreover, OpenOffice. It can successfully work with files of many formats, including files created by other well-known office packages.

In this brief introduction, we, of course, can not describe all rich opportunities. OpenOffice. We will guide only on the installation of the system, as well as the main actions in the text processor and hTML Editor files. Information about the work of the rest OpenOffice. Available in the prompt system (though, in English).

In many ways, work in OpenOffice. Similar to work in any other office package. Wherein OpenOffice. It is able to work with many common formats data files. Therefore, we hope that the beginning of the application OpenOffice. Does not cause you special difficulties.

Running OpenOffice.

Starting components OpenOffice. made from the menu OpenOffice. in Kde. or Gnome.:

  • Text processor Writer. Runs item "Text Document";
  • HTML editor runs item "HTML Document";
  • Electronic table system Calc. Runs item "Document of the spreadsheet";
  • Presentation preparation system Impress Runs item "Presentation";
  • Editor drawings Draw. Runs item "Picture";
  • Editor formula Math. Runs item "Formula".

Immediately after the first launch, some additional settings For correct work with the Russian language.

Installation and Initial Setup OpenOffice.

Initial installation package OpenOffice. Performed during installation Asplinux.. Run any of the components OpenOffice. You can right from the toolbar by clicking on the appropriate icon. We recommend starting with Writer. (You can also choose subparagraph menu "OpenOffice"Kde. or Gnome."Text Document"). When starting, a window will appear offering import address book. Press the button "Cancel".

For correct work OpenOffice. With Russian, including checking and editing HTML files, some additional settings should be made. To do this, select the item in the main menu. "Service", then "Parameters". The Setup window opens OpenOffice..
In this window, you can change very many settings regarding the work of various components. OpenOffice.. However, we will only describe the installations that need to be done for the proper operation of the system with the Russian language.

On the left side of the window, select item "Language settings". The tree of subparagraphs will be revealed. Choose "Linguistics".

At the right upper part of the window, the item must be selected And next to it should be included "Tick". If this is not the case - turn on the "tick" by clicking the mouse. Click on the button "Edit ..." in the right upper part of the window. A window will appear "Edit Modules" \.

The language must be selected in the language field. "Russian"; If it is not so, make a click click. Then turn on the "tick" before the point "OpenOffice Myspell Spellchecker".

In addition to Russian, you can inspect spelling in the same way for Ukrainian, German and French languages. For of English language It is turned on initially. Turning on spelling check for the languages \u200b\u200byou need, click "Close". Window "Edit Modules" Close. You will return to setting the parameters OpenOffice.. Select the item on the left side of the window. The tree of subparagraphs will be revealed. Choose "Compatibility with HTML".

In field "Set of signs" You should select an encoding in which you want to save HTML files.

Standard encoding for the Internet - "Cyrillic (Koi8-R)". Select "Text Document" In the left side of the window. The tree of subparagraphs will be revealed. Choose "Basic Fonts".

Here you need to choose the fonts used for different types of text. You must specify the fonts installed in the system and correctly supporting the Russian language - for example, Helvetica. After completing the setting of the parameters, click Ok At the bottom of the window. Now you can work with office package program OpenOffice..

Text Editor / Processor Writer.

Basic text editing functions

Working with basic functions Writer. - Entering text, moving via text, highlighting the block, cutting, copying, or insert - is almost similar to work in any of the well-known text processors with graphical interface (for example, for Windows or Macintosh).

View modes

IN OpenOffice Writer. There are two modes of viewing and editing text on the screen - "page layout" and "ONLINE Markup". When using the page markup on the screen, the page is shown in the same form, in which it must be printed. If installed "ONLINE Markup"The text is shown without splitting on the page and with a width in the entire window. Writer. - i.e. So, as text is usually shown in web browsers. Mode "ONLINE Markup" It is convenient when preparing documents distributed in in electronic format, as well as when writing the texts of a large volume. Switching between modes "page layout" and "ONLINE Markup" Performed in the main menu - item "View", then "ONLINE Markup". In addition, on the panel located on the left of the text, there is an icon that allows you to switch the viewing mode.

Scale

Writer. Allows you to set the scale (zoom) of the text view as a percentage. To change the scale, select the item in the main menu "View", then "Scale". In the window that appears, you can choose from several fixed scale options or by selecting the item. "Smooth", specify an arbitrary value of scale.

Then click the button Ok. The new scale will be installed. Zoom selection window can also be called, twice with the left mouse button on the scale value, which is shown in the status bar at the bottom of the window Writer..

Spellchecking

Writer. Allows you to check spelling both during text set (uplinking words with errors) and when calling the check function. To enable or disable an upset of words with errors, select the item in the main menu "Service", then "Spelling", "Self-checking".

When the word is emphasized, you can choose from the proposed system of correct options or add this word in. To do this, click on the word with the right mouse button. A menu appears in which the correct options are given, and there is an item. "Add". To check the spelling throughout the text, select the item in the main menu "Service", then "Spelling", "Check"Or press the key. The process of checking will begin.

When the word is discovered in the dictionary, a window appears "Spelling" .

In this window, you can specify whether you can correct this word (you can select one of the options proposed or enter your own), replace it with the selected option in all the text, skip it (leaving unchanged) or skip in all text. Button "Add" Allows you to add this word to the dictionary.

Automotive words

Interesting function OpenOffice Writer. - Auto-warming words. If you scored a few first letters of the word, which was previously gained, Writer. Automatically substitute this word. If the proposed option is not suitable, just continue to recruit. And if it is suitable, click - the word will be dick completely, and you can continue the set from the next word. Sometimes this feature may noticeably save time, and with the usual set of behavior Writer. does not change. If the auto-execution is annoyed, it can be turned off. If the system often offers some particular word that does not suit you, you can delete this word. To produce these operations, select the item in the main menu "Service", then "Auto-plane / autoformat ..." and click the mouse to the item "Completion of the Word" in the top of the window

To disable the auto-pass, follows the mouse clicking to remove the "tick" in the point "Supplement words". So that the system does not offer this or that particular word, it should be found in the list in the right part of the window (it is sorted by alphabet), select a click and delete by clicking the button "Delete Record".

Search and replacement

Like any modern text editor, OpenOffice Writer. Allows you to search for text and replacing the found sequence of signs to another. To search or replace, you should select the item in the main menu. "Edit", then "Find and replace ..."Or press the keys. The search and replacement window will appear.

In it, you can enter the string of the characters you want to find and, if necessary, the other on which it should be replaced. Button "To find" Allows you to find this string. Button "Replace" Replaces the found string to a new one and finds where this line appears in the text next time (new button pressing "Replace" will replace and search next line etc.). To replace one line to another throughout the text, use the button. "Replace everything".

Basic formatting of text

As in most well-known text processors, text formatting in Writer. It is made separately by signs and paragraphs. The sign format includes font, size, emphasis / italics, etc.; To the format of paragraph - indents (horizontal and vertical), alignment, etc.

Formatting of signs

To change the format of signs (letters), these signs should be highlighted. If you specify a change in the sign format without highlighting characters, it will refer to the signs that you enter immediately after that (without moving the cursor).

The simplest change in formatting is the on / off of the fat text, the cruising and undercutting - it is performed by clicking on the corresponding buttons on the toolbar ([F], [K], [H]). To change the font, you can select it in the list present on the toolbar.

For more complex formatting of characters, select the item in the main menu "Format", then "Signs". A window will appear "Sign" .

In this window, switching points at the top of the window, you can customize all possible options Formatting related to signs. It is important that the text language is also installed in this window. IN OpenOffice Writer. Language is the character of the sign. Verification of spelling of each word is made in accordance with the language specified for it.

Formatting paragraph

parform To change the format of paragraph, it is enough to install the cursor in this paragraph. To change the formatting of several paragraphs at once, you should select them. Changing the alignment is made by clicking on the relevant buttons on the toolbar.

For more complex formatting paragraph, select the item in the main menu "Format", then "Paragraph". A window will appear "Paragraph" .

In this window, switching points at the top of the window, you can configure all possible formatting options related to paragraph. In particular, you can specify the design of paragraphs in the form of a numbered or non-measured list (item "Numbering").

Formatting text with styles

Like many common office text processors, OpenOffice Writer. Allows you to format text with styles. The main type of styles is the styles of paragraph.

Paragraph style defines formatting as the paragraph itself (indentation, etc.) and formatting of signs in the paragraph (font, size, etc.).

If the paragraph is formatted using style, the change in style automatically leads to a change in paragraph formatting. This is the first advantage of using styles. For example, if you want to change the font and size of all titles in the text, without the use of styles would have to make changes to each title separately. But if all the headers are formatted with styles "Title 1", "Title 2" etc., just change only these styles.

In addition, the styles of paragraph allow to produce logical layout of the text, i.e. Specify the boundaries of sections, chapters, etc., as well as special types of paragraphs (for example, quotes or examples). The beginning of the sections and chapters is determined using headlines highlighted with styles. "Title 1", "Title 2" etc. Writer. It can automatically generate table contents of the text, indicating paragraphs with these styles as partition names. There is also the ability to automatically number sections.

In addition to the styles of paragraph, styles are supported. Sign Style Defines the formatting of signs without affecting the formatting of paragraphs. Signs styles are conveniently used, for example, to highlight a quote in the text.

Window is used to work with styles "Stylist" .

To invoke this window, you should select the item in the main menu. "Format", then "Stylist"or press the key. Initially in the window "Stylist" Showing a list of paragraph styles.

Style application

To specify paragraph formatting style, you should set the cursor to this paragraph, and then select the desired mouse click in the window. "Stylist" . (If the cursor is installed on an empty paragraph, the style will still be assigned, and the text you receive further formatted using this style).

To specify a style for multiple paragraphs right away, you need to highlight these paragraphs, and then select the desired mouse click in the window "Stylist" .

To apply styles of signs, switch the window "Stylist" In the list of styles of signs. To do this, click on the left mouse button on the icon with the letter [A] in this window. After that, to format the section of the text using the style styles, select this section, and then click the mouse in the window "Stylist" Specify the desired style. If you specify the style of signs without selection, it will relate to the signs that you enter immediately after that (without moving the cursor). To switch the window "Stylist" Back to list of paragraph style list, you should select the icon with the letter in this window similar to [P].

Editing Style

To change any of the styles (paragraphs or signs), choose this style in the window "Stylist" "Change". The style editing window will appear.

Points at the top of the window allow you to change the various properties of formatting characters and (for paragraph style) the properties of the formatting of the paragraph. Paragraph "Organization" Used to set style properties. Field "Name" Determines the name of the style. Field "Associated with" Indicates the basic style for this style; If the basic style changes, similar changes are automatically entered into this style.

Paragraphs also have a field "Next style". In it, you can specify how the next paragraph is automatically formatted (when typing), if the previous paragraph is formatted by this style. So, the following style is usually installed for the title style "Main text"; This allows after entering the header immediately, without spending time to choose a style, enter text. To create new styleYou should click on the right mouse button in the window. "Stylist" and choose from the menu item appeared "Create". A style editing window will appear in which you can specify all the necessary properties of the style. If window "Stylist" Located in the list of paragraph styles list, the paragraph style is created; If it is in the list of styles of signs, then the style of signs are created.

In addition, the system allows you to format the paragraph with ordinary tools, and then automatically create a style with exactly such formatting. To do this, formatting paragraph, click in the window "Stylist" Second right icon in the upper right corner. The system will propose to enter the name of the new style, after which it will be created and will appear in the list. You can also delete the previously created style. To do this, select the style in the window "Stylist" Click the mouse, and then click the right mouse button and select the Select item in the menu "Delete". However, the system does not allow remove styles that are present in Writer. Initially.

Page formatting

Writer. Allows you to configure the page size, as well as the top and bottom footers (i.e., the strings at the top and bottom of the page) and other page formatting properties. Moreover, for different pages, you can set different formatting with pages styles.

Installation of page format

To set the page format, turn on the upper or footer, etc., call the item in the main menu "Format", then "Page". A page editing window will appear.

In this window you can install, in particular:

  • Page size (item "Page" in the top of the window);
  • Page numbering style - Arabic numbers, Roman numbers, etc. Paragraph "Page", Field "Markup Settings" - "Format";
  • Turning on and indenting the upper and footers - items "Page header" and "Footer". In particular, in any of these items, you can disable the "tick" ; This will create different columns for read and odd pages.;
  • Turning on and view of the frame around the page - Item "Framing";
  • Text formatting on a few columns page - item "Speakers".

By installing the required page format, click "OK".

Pagination

To enable pages numbering, you must first turn on the desired footer (top or bottom). Turning on the footer, you can edit it (when viewing the text "Page layout") as ordinary text.

By installing the cursor to footer, select the item in the main menu. "Insert", then "Field", then "Page number". The page number will appear. On each page, it will automatically appear and set to the desired value.

To move the page number (along with the rest of the footer) to the left corner, center or right angle, follows, setting the cursor to footer, switch paragraph alignment (on the left edge, center, or right edge) the corresponding button on the toolbar Writer..

If the number must be differently located on a reader and odd page, it follows in the page Style Editing window to turn off for a footer in which the page number is "Tick" "Same content on the left / right". After that, place the room in the right way In footer on one even and one odd page.

Styles pages

In many cases, it is necessary to ensure different formatting of different pages - for example, disable the page number for the title page.

OpenOffice Writer. Allows you to establish fully independent formatting for different pages - up to different sheet size. This uses page styles. (Using Page Styles is a fairly difficult operation that goes beyond this short guide.)

Working with Text Chapters

If headlines chapters marked with row styles "Title", and the level of headers is reflected in the use of styles (i.e., for example, for sections top level Used "Title 1"for subsections - "Title 2" etc.), OpenOffice Writer. Allows you to automatically make the numbering of chapters, as well as create a table of contents.

Chapter Numbering

To produce automatic numbering chapters, select the item in the main menu "Service", then "Numbering chapters". A window will appear "Numbering chapters" .

Here you can configure the numbering of chapters. The right part of the window shows an example of numbering in the form that is configured in this moment. You can find the desired numbering option, trying various settings and observing the changes in the example.

Generation of table of contents

For automatic creation Table of contents Install the cursor to the text of the text where the table of contents should be. Select the item in the main menu "Insert", then "Pointers", then "Pointers ...". A window will appear "Insert a pointer"

In this window, you can carry out the insertion of various pointers, but the original option is the table of contents. In field "Rate up to level" You can specify the headers of which levels should be included in the table of contents.

For example, when 3 in the table of contents will include all paragraphs with style "Title 1", "Title 2" and "Title 3". After pressing the button Ok The system will generate a table of contents and places it where the cursor was located.

Insert drawings

OpenOffice Writer. Allows you to insert pictures (taken from files) and specify their location, as well as whether they will "lie" with text. To insert a picture in the text, select the item in the main menu "Insert", then "Picture", then "From the file ..." The insertion window appears from the file from the file.

Here you can choose the desired file..

When the file is selected by clicking (if "Tick" is enabled "View") It is turned on its preview on the right side of the window. To insert the selected pattern in the text, click "Open".

Clicking the figure with the right mouse button, you can call the drawing settings menu. With this menu you can install, in particular:

  • How will the drawing be located in the text (item "Binding") - on a fixed position in relation to the page, to a certain paragraph, to a certain sign or as a sign. If the drawing is located "as a sign", it is inserted into the string as well as the usual sign (but its size does not change when the font size changes).;
  • Will the text "contend" the drawing and if yes - how exactly (item "Flood").

Saving and reading files

OpenOffice Writer. Saves and reads files in format.sXW. This format is fully published and based on open standards. In addition, it allows you to save and read files in formats.RTF (Rich Text Format), .doc (Microsoft Word 95 or 97/2000 / XP) and others.

Save File

To save the current text on the disk as a file, select the item in the main menu "File", then "Save"Or press keys. If the file has already been saved, it will be saved again under the same name. If he has not yet been saved, a window of selecting the name and format of the stored file will appear.

In this window you can choose required catalog To save the file, specify the file name, as well as select its format (type). When specifying the name and type of file, click the button "Save". After that, the file will be recorded on the disk.

Saving a file under the new name

If you work with a file that has previously been saved, and want to save it under a different name (or in another format - for example, .rtf or.doc), select the item in the main menu "File", then "Save as…" A file selection selection window will appear (see \\ riceris23), and you can specify the new name and file format.

Reading File

In this window, you can find the right directory and select the file that you want to open. By clicking the desired file with the mouse, click "Open". Writer. He considers the file and, if reading has passed successfully, you can view and edit the contents of this file.

Editing HTML.

Editing hTML files (format for www pages) in OpenOffice. Extremely similar to editing texts in OpenOffice Writer.. (Really editing HTML is made precisely Writer.operating in special mode). This allows you to create WWW-pages without special training, as well as easy to convert text documents to the WWW page. You can use to edit HTML documents almost all the techniques described above for Writer..

Basic editing HTML

HTML documents can be formatted as well as ordinary documents. However, the resulting WWW pages will be sufficiently uncomfortable for viewing. For correct formatting of HTML documents, you should use special paragraph styles that are automatically offered in the window. "Stylist" When editing such a document.

For the main text, use the style "Main text", for headlines - group styles "Title", for quotation - "Quote" etc. You can specify the alignment of paragraphs, as well as allocate sections of text with bold font, italic or underground. But changing the font is very undesirable - it can lead to difficulties in some users when watching your page.

Creating links

As you know, important hTML element - Ability to create links (HyperLinks) to other documents.

In this window, specify the document to which the link is made, as well as the link text. Link text is indicated in the field. "Text". The method of specifying the document to which the link is made is switched to the left side of the window.

When choosing item « » The ability to enter a link to a document on the Internet in full format (URL). Paragraph "Letters and Messages" Allows you to describe the link to the address email (MailTo) or News Group usenet. (NEWS). Selecting item "Document", You can insert a link to an existing document on the disk. It should be borne in mind that although in the field "Way" It is indicated by the full path to the document, in fact, if the documents are in the same directory, the link is created only on the document name - therefore, in the case of transferring both files to the Internet, the link continues to work.

Finally, point « new document» Allows you to create a reference to a document that is not yet created on the disk. The system provides the ability to immediately create this document (for this you should select item "Edit now" At the top of the window) or create a link without creating a document (item "Edit later"). It is important to correctly select the type of file from the list (for example, "HTML Document"), not just specify the full file name. When the data for the link is entered, click "Apply". The link will be created.

To edit a link, you should install the cursor on it and select the item in the main menu "Insert", then "Hyperlink". The same window appears (see \\ riceris25), but filled with data of the specified reference. In this window, you can make the desired changes and click the button. "Apply".

Saving and read HTML files

Saving and read when editing HTML files is performed in the same way as in Writer.. It is important that in the composition of HTML files, the drawings are not saved. Therefore, when transferring a file to another computer or on the Internet, they may be lost. Even if another computer is transferred to another computer, and the drawings to it, but they are in different directories, drawings may disappear from the document. That this does not happen, it is best to keep all the drawings inserted into the document in the same directory as the document itself, and transfer them to another computer or on the Internet with the document. It should be borne in mind that OpenOffice. Almost any file in HTML format can be considered, but the Russian letters will be correctly shown correctly. It's not an error in OpenOffice., and the lack of such files - the encoding of Russian letters is not specified in them, or incorrectly. Instead of KOI8-R, the coding of Russian letters in this file; The most common encodings are Koi8-R, Windows-1251 and UTF8.

Editing the source text HTML

OpenOffice. Allows you to switch from editing the contents of the HTML document in visual mode (i.e., in the form in which it will be apparently in a web browser) to work with the source text on hTML language. This can be useful in a number of cases when checking and correcting directly HTML text. To enable or disable the edit mode of the original hTML text, select the item in the main menu "View", then "HTML source text".

Creating www pages using autopilot

OpenOffice. contains "Autopilot WWW pages", allowing in a short time and without additional costs to create a standard and fairly beautiful www page. To take advantage "Autopilot", select the item in the main menu "File", then "Autopilot", then "Web page ..." A window will appear "Autopilot Web-Page" .

By choosing the values \u200b\u200bof the fields, you can immediately see on the screen, how the created page will look like. Feature the desired view, click "Ready". You can edit an HTML document that immediately possess external species. Now it is enough just to fill it with information.

Leave your comment!

I think who at least sometimes works with electronic documents, got into such a difficult situation when an empty page is formed in the middle of the text, which sometimes it is sometimes difficult to get rid of. In today's release, I will tell you how to remove an empty page in the Word. The instruction will apply not only when working with the program Microsoft Office. Word, but also in other text editors you can remove empty sheets, in the same Open Office Writer, Libre Office Writer, WordPad, etc.

And we start!

Causes of empty pages

Often we are not clear at all, for what reason an empty page appeared in text document Word.. To swim in this moment, as a fish in the water I advise you to read this post to the end. The first thing you need to do is to turn on the display of paragraph characters. This feature is in all versions of Microsoft Word, with its help, we can figure out how to remove the page in the Word.

Instructions for steps:

Now go directly to solving the problem. We will gradually discuss the causes of the occurrence blank page And how to get rid of it.

How to remove an empty page in the Word

The most elementary way to remove an empty page is to use the "Delete" or "Backspace" keyboard keys. If for some reason you have broken the keyboard, you can use virtual, more on how to make it displayed on the screen read in the article:

So, to get rid of the last sheet of the document, install the mouse cursor at the end of the text, after the last sentence point.

The next step click on the Delete key until the empty page disappears. If for some reason the page is not removed, then accept it as proper. I am sure that the last empty page does not prevent you. When printing, there is always the ability to specify not "all pages", and from 1 to the penultimate (digit). So that there should be no problems with this.

Much more unpleasant when the empty page is located inside the text. In this case, you also need to install the mouse cursor before an empty snout, that is, set the cursor after the last sentence, and then goes empty space. Then click on the Delete button and thus raise the text.

But here arises difficulty. Often, students and many other text editor users have already placed the subtitles in advance, someone has even content and as a result, everything shifts. Bottom: Requires a lot of time to align the subheadings and edit content, if it is written. So that this does not arise, I advise you to monitor formed empty areas.

Thematic issues:

Sometimes a blank page appears when the printer is printed, but in the document no pass viscos. In this case, you have problems with a printing device, perhaps settings. This, however, is not scary. However, from the settings, because of which there may be such a jamb - the parameters are set to the seal of the separator between different tasks.

How to remove an extra paragraph

An empty page may appear after you have pressed on ENTER. Just click on this key and new page Quickly forms. Therefore, when you form extra empty strings, press Enter back keys, that is, the Delete key.

To see paragraphs in Microsoft Office Word, on the main toolbar ("Home" tab) in the Paragraph box, click on the "Display All Signs" button. Perform everything as shown in the screenshot below. This can be checked in all versions of Microsoft Word.

After a paragraph sign appears on the page, the icon is: ¶. You will have to allocate them all and erase. As a result, the space is narrowed and the excess page will disappear.

How to remove page break

It is not uncommon when it is necessary to delete an empty page due to inserted breaks. If the user made a break and only after adding the text to him, the separator slides down to the next sheet.

As in the Word, remove an empty sheet with a break: it is enough to highlight the separator symbol and erase it using the "Delete" key.

Gap section

Empty spaces can form sections, more precisely their separators.

If the gap is only before the last page, you can easily remove it, just like the page break.

If the extra sheet in the Word was formed in the middle or somewhere in the middle of the text, then removal empty sheet He will fail the bottom of the text, that is, the sections will be located not in their places. You have to level everything below the remote blank page. I mentioned it above.

To avoid this, change the type of gap:

  • Install the mouse cursor after the break.
  • Open the Advanced Settings of the "Parameters" section in the "Layout" tab, for this, use the button in the lower corner.
  • In the section "Section" at "Start Section", set the "on the current page" parameter.

As a result, you can not only remove the page in the middle of the document, but also maintain the stable location of the subtitles and paragraphs below the empty sheet.

Blank page due to tables

When creating a table, at the end text documentA blank page will be created. In the Word after the table, the paragraph is always put, remove which is not possible, due to the established standards.

If the table is inserted into the end of the sheet, the paragraph sign moves to the next page.

To make a sheet new, you need to know how to remove a sheet in Word after the table:

  • At first, select the paragraph symbol and open the font tool - clamp the Ctrl + D key combination or select the right mouse button in the context menu.
  • Section "Modify", install a tick on the "Hidden" parameter.
  • After that, hide the display of hidden signs in the Abzatz block. Ready!

Conclusion

Now you know how to delete an empty page in Word. We disassembled a variety of cases of an empty sheet, so I strongly hope that questions on this topic will definitely do not arise.

In the case of working with text editors, Live Office, Open Office or Wordpad, you can remove the page using the Delete key. Other tools, for example, as in Word, Writer and Worpad are missing.

Also, if necessary, you can use the online text editor. For several years, Microsoft has been providing this opportunity.

If you are interested in learning microsoft programs Word and you are interested in reading articles on the creation of all these text editors, then be sure to get acquainted with the material about.

Thematic video:

In this tutorial, you will learn how to remove the empty page in the Word. The video allowance is intended for those who better assist the clearly presented information:

Training course - Basics of work in OpenOffice

OpenOffice Calc - spreadsheets

Work with sheets

Like any other Calc element, the sheets can be inserted, deleted and renamed.

Insert new sheets

There are many ways to insert a new sheet. The first step in all methods is the selection of sheets, after which will be inserted new sheet. After that, you can use the following actions.

  • Open menu Insert and choose Sheet, or
  • Right-click on the tab and select Add sheets, or
  • Click on an empty place at the end of the sheet tab strings.

Each method leads to the opening of the dialog box. Insert sheet. It can determine whether a new sheet will be located before or after the selected sheet, as well as how many sheets you need to insert.

Removal of sheets

Sheets can be removed separately or group.

Separate sheet

Right-click on the Leaf Removable tab and select from context menu Delete.

Several sheets

To remove several sheets, highlight them, as described above, right-click on any tab and select from the context menu Delete.

Rename sheets

The standard name of the new sheet is "sheetX", where the X number. It works well when there are only a few sheets for a small spreadsheet, but it becomes uncomfortable with a large number of sheets. To assign a list of a more meaningful name, you can:

  • Enter your name in the field when creating a sheet Name, or
  • Right-click on the Sheet tab and select from the context menu Rename and replace the existing name new.

OpenOffice Writer is a fairly convenient free text editor, which is gaining increasingly popular among users every day. Like many text editorsHe also has its own characteristics. Let's try to figure out how you can delete extra pages.

  • Open the document in which you want to delete a page or page

  • In the main menu of the program on the tab View Select Unprintable symbols. This will allow you to see special symbolsthat are not displayed in as usual mode. An example of such a symbol may be "paragraph sign"
  • Delete all unnecessary characters on a blank page. This can be done using either key Backspace. either key Delete.. After completing these actions, a blank page will be removed automatically.

Delete page with text in OpenOffice Writer

  • Remove unnecessary text using the key Backspace. or Delete.
  • Repeat the steps described in the previous case

It is worth noting that there are cases when there are no unprinted characters in the text, but the page is not deleted. In such a situation, it is necessary in the main menu of the program on the tab View Select item Web Page Mode. At the beginning of a blank page, press the key. Delete. and switch to mode again Print markup